On the Theory of Elastic Stability
TLDR
In this paper, the authors present an extension of Hooke's Law for determining the stability under stress of thin shells of isotropic elastic material, which they use to determine the equilibrium of an elementary volume of the substance by considering the forces acting upon it.Abstract:
The object of the present paper is to derive equations that are adequate to decide questions of the stability under stress of thin shells of isotropic elastic material. Equations for the same purpose have been given by R. V. Southwell, who used a method that is closely followed in a part of this paper. Such equations must contain terms that may be, and are, neglected in applications of the theory of elasticity to problems in which the stability of configurations is not considered. The truth of Kirchhoff's uniqueness theorem, which has reference to the ordinary equations of elasticity, in which powers of the displacement co-ordinates above the first are neglected, is sufficient proof of this statement. In practice it is generally sufficient to retain only the first and second order terms, and no terms of higher order are considered here. To obtain such equations an extended form of Hooke's Law is necessary; the extension made by Southwell is used in this paper. There are then two methods available for the derivation of the equations. Either we may obtain the three conditions for the equilibrium of an elementary volume of the substance by considering the forces acting upon it, or we may calculate the energy of strain correct to the third order of displacement co-ordinates, and deduce the equations by variation of this function. The first method has been used in one place here, as it would appear to be the simpler in the particular case of a plane plate, in which only one of the equations, and that the simplest, is required. However, the stability equations for a cylindrical shell are also obtained, and then all three equations are necessary. The derivation by the first method of each one of these is a laborious matter, while using the second method there is only one calculation, that of the strain energy function, to be made. Consequently, for this purpose, as in general, the second method seems to be preferable.read more
Citations
More filters
Journal ArticleDOI
A continuum mechanics based four‐node shell element for general non‐linear analysis
TL;DR: In this article, a general quadrilateral shell element for geometric and material nonlinear analysis is presented, which is formulated using three-dimensional continuum mechanics theory and it is applicable to the analysis of thin and thick shells.
Journal ArticleDOI
Mechanics of carbon nanotubes
TL;DR: The theoretical predictions and the experimental techniques that are most often used for the challenging tasks of visualizing and manipulating these tiny structures are reviewed and the computational approaches taken, including ab initio quantum mechanical simulations, classical molecular dynamics, and continuum models are outlined.
Journal ArticleDOI
Interfacial toughness measurements for thin films on substrates
TL;DR: There are more than 200 different methods for measuring thin film adhesion, suggesting it to be material, geometry and even industry specific as discussed by the authors, suggesting that the major extrinsic variables are film stress, extent of delamination, thickness and temperature while the major intrinsic ones are modulus, yield strength, the thermodynamic work of adhesion and one or more length scales.
Journal ArticleDOI
Keratin: Structure, mechanical properties, occurrence in biological organisms, and efforts at bioinspiration
TL;DR: Keratin can be classified as α- and β-types as discussed by the authors, and α-types have a characteristic filament-matrix structure: 7nm diameter intermediate filaments for α-keratin, and 3nm diameter filament for β-kkeratin.