scispace - formally typeset
Journal ArticleDOI

Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry

David White, +2 more
- 01 Sep 2003 - 
- Vol. 53, Iss: 7, pp 619-631
Reads0
Chats0
TLDR
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing as mentioned in this paper.
Abstract
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing. In this paper, the theory underlying this system is described, and the performance is validated. Digital photography is used to capture images of planar soil deformation. Using PIV, the movement of a fine mesh of soil patches is measured to a high precision. Since PIV operates on the image texture, intrusive target markers need not be installed in the observed soil. The resulting displacement vectors are converted from image space to object space using a photogrammetric transformation. A series of validation experiments are reported. These demonstrate that the precision, accuracy and resolution of the system are an order of magnitude higher than previous image-based deformation methods, and are comparable to local instrumentation used in element testing. This performance is achieved concurrent with an order of magnitude increase in the number of meas...

read more

Citations
More filters
Journal ArticleDOI

Correlation of multi-temporal ground-based optical images for landslide monitoring: Application, potential and limitations

TL;DR: In this paper, a low-cost methodology to monitor the displacement of continuously active landslides from ground-based optical images analyzed with a normalized image correlation technique is presented, which can be routinely and automatically applied for operational applications like, for instance, in early warning systems.
Journal ArticleDOI

Fracture of sandstone characterized by digital image correlation

TL;DR: In this paper, a comparison of a pair of digital images is performed by matching a small area from the image before deformation to the image after deformation using a cross-correlation algorithm, and the correlation is based on a Fast Fourier Transform method.
Journal ArticleDOI

Evaluation of landslide triggering mechanisms in model fill slopes

TL;DR: In this article, the authors evaluate two candidate triggering mechanisms (static liquefaction and the transition from slide to flow due to localised transient pore water pressures) against observations of slope behaviour obtained from highly instrumented centrifuge model tests.
Journal ArticleDOI

A model study on the effects of input motion on the seismic behaviour of tunnels

TL;DR: In this paper, the effects of input motion characteristics on seismic behavior of circular and square tunnels were investigated using dynamic centrifuge tests on model tunnels using input motions of different amplitude and frequency.
Journal ArticleDOI

Recent advances in offshore geotechnics for deep water oil and gas developments

TL;DR: In this paper, an overview of recent developments in geotechnical analysis and design associated with oil and gas developments in deep water is presented, including: new equipment and techniques to characterise the seabed; yield function approaches to evaluate the capacity of shallow skirted foundations; novel anchoring systems for moored floating facilities; pipeline and steel catenary riser interaction with the seafloor; and submarine slides and their impact on infrastructure.
References
More filters
Journal ArticleDOI

Particle-Imaging Techniques for Experimental Fluid Mechanics

TL;DR: A review of these methods can be found in articles by Lauterborn & Vogel (1984), Adrian (1986a), Hesselink (1988), and Dudderar et al..
Proceedings ArticleDOI

A four-step camera calibration procedure with implicit image correction

TL;DR: This paper presents a four-step calibration procedure that is an extension to the two-step method, and a linear method for solving the parameters of the inverse model is presented.
Proceedings ArticleDOI

Calibration procedure for short focal length off-the-shelf CCD cameras

TL;DR: A camera calibration procedure intended for a 3D measurement application is presented, paying attention to the various error sources, and notices that a more complete camera model is needed to explain all the error components.
Journal ArticleDOI

A review of instrumentation for measuring small strains during triaxial testing of soil specimens

TL;DR: In this article, the authors present a survey of small-strain measuring devices and their modes of operation, benefits, capabilities, and limitations, as well as a classification of internal and external measuring devices.