scispace - formally typeset
Journal ArticleDOI

Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry

David White, +2 more
- 01 Sep 2003 - 
- Vol. 53, Iss: 7, pp 619-631
Reads0
Chats0
TLDR
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing as mentioned in this paper.
Abstract
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing. In this paper, the theory underlying this system is described, and the performance is validated. Digital photography is used to capture images of planar soil deformation. Using PIV, the movement of a fine mesh of soil patches is measured to a high precision. Since PIV operates on the image texture, intrusive target markers need not be installed in the observed soil. The resulting displacement vectors are converted from image space to object space using a photogrammetric transformation. A series of validation experiments are reported. These demonstrate that the precision, accuracy and resolution of the system are an order of magnitude higher than previous image-based deformation methods, and are comparable to local instrumentation used in element testing. This performance is achieved concurrent with an order of magnitude increase in the number of meas...

read more

Citations
More filters
Journal ArticleDOI

Influence of tunnel failure on the existing large-diameter tunnel in improved soil surround

TL;DR: In this article, the effect of failure of a temporary opening on the stability of nearby existing large diameter tunnel in cement-treated soils is discussed, and the results of the centrifuge tests were then used to develop a numerical model in a geotechnical finite element software package GeoFEA version 9 for parametric studies.

Centrifuge modelling of tunneling-induced settlement damage to 3D-printed surface structures

TL;DR: In this article, small scale structural models with facade openings and brittle material properties were 3D printed and tested in a geotechnical centrifuge to predict building settlement response with greater certainty.
Journal ArticleDOI

Diagnosis of the power frequency vacuum arc shape based on 2D-PIV

TL;DR: In this paper, the authors extracted the shape of the vacuum arc shape using digital image processing technology, and the two dimensional motion trajectory and velocity distribution of the arc macro particles in different arc combustion stages were obtained based on 2D-PIV technology.
References
More filters
Journal ArticleDOI

Particle-Imaging Techniques for Experimental Fluid Mechanics

TL;DR: A review of these methods can be found in articles by Lauterborn & Vogel (1984), Adrian (1986a), Hesselink (1988), and Dudderar et al..
Proceedings ArticleDOI

A four-step camera calibration procedure with implicit image correction

TL;DR: This paper presents a four-step calibration procedure that is an extension to the two-step method, and a linear method for solving the parameters of the inverse model is presented.
Proceedings ArticleDOI

Calibration procedure for short focal length off-the-shelf CCD cameras

TL;DR: A camera calibration procedure intended for a 3D measurement application is presented, paying attention to the various error sources, and notices that a more complete camera model is needed to explain all the error components.
Journal ArticleDOI

A review of instrumentation for measuring small strains during triaxial testing of soil specimens

TL;DR: In this article, the authors present a survey of small-strain measuring devices and their modes of operation, benefits, capabilities, and limitations, as well as a classification of internal and external measuring devices.