scispace - formally typeset
Journal ArticleDOI

Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry

David White, +2 more
- 01 Sep 2003 - 
- Vol. 53, Iss: 7, pp 619-631
Reads0
Chats0
TLDR
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing as mentioned in this paper.
Abstract
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing. In this paper, the theory underlying this system is described, and the performance is validated. Digital photography is used to capture images of planar soil deformation. Using PIV, the movement of a fine mesh of soil patches is measured to a high precision. Since PIV operates on the image texture, intrusive target markers need not be installed in the observed soil. The resulting displacement vectors are converted from image space to object space using a photogrammetric transformation. A series of validation experiments are reported. These demonstrate that the precision, accuracy and resolution of the system are an order of magnitude higher than previous image-based deformation methods, and are comparable to local instrumentation used in element testing. This performance is achieved concurrent with an order of magnitude increase in the number of meas...

read more

Citations
More filters
Journal ArticleDOI

Quick identification of expansive soil in the field based on PIV technique

TL;DR: In this paper, a set of expansive soil identification device was developed based on Particle Image Velocimetry (PIV) technique, which can provide a constant temperature environment and stable image acquisition conditions under outdoor environment.
Dissertation

Accuracy improvement in area-based matching for structural displacement measurements

TL;DR: It can be concluded that the use of multi-image area-based image matching using surface models is capable of measuring displacements and be used as an additional approach that complements the traditional methods in beam displacement measurements.
Journal ArticleDOI

Experimental and numerical investigation on cavity formation from large rectangular spudcan penetration in clay

TL;DR: In this article, the authors combined finite element analysis and centrifuge experiments to study the penetration process of large scale rectangular spudcans in the clay with undrained shear strength varying with depth.
Journal ArticleDOI

Effects of groove angle and pattern on CFRP-to-concrete bond behavior of EBROG joints: Comparison of diagonal with longitudinal and transverse grooves

TL;DR: In this article , the performance of externally bonded reinforcement on grooves (EBROG) joints with different angles and patterns has been investigated, and the results showed that the optimum groove angles were found to be zero (longitudinal groove) and 90 degrees (transverse groove); e.g., compared to EBR, in the specimens with 30 mm groove spacing, the longitudinal and transverse grooves increased the bond strength up to 84.5% and 89.7% respectively.
Journal ArticleDOI

Diametric splitting tests on unsaturated expansive soil with different dry densities based on particle image velocimetry technique

TL;DR: In this paper, the authors employed a newly developed diametric splitting testing apparatus and particle image velocimetry (PIV) system to study the tensile strength of compacted unsaturated expansive soil with different water contents and initial dry densities.
References
More filters
Journal ArticleDOI

Particle-Imaging Techniques for Experimental Fluid Mechanics

TL;DR: A review of these methods can be found in articles by Lauterborn & Vogel (1984), Adrian (1986a), Hesselink (1988), and Dudderar et al..
Proceedings ArticleDOI

A four-step camera calibration procedure with implicit image correction

TL;DR: This paper presents a four-step calibration procedure that is an extension to the two-step method, and a linear method for solving the parameters of the inverse model is presented.
Proceedings ArticleDOI

Calibration procedure for short focal length off-the-shelf CCD cameras

TL;DR: A camera calibration procedure intended for a 3D measurement application is presented, paying attention to the various error sources, and notices that a more complete camera model is needed to explain all the error components.
Journal ArticleDOI

A review of instrumentation for measuring small strains during triaxial testing of soil specimens

TL;DR: In this article, the authors present a survey of small-strain measuring devices and their modes of operation, benefits, capabilities, and limitations, as well as a classification of internal and external measuring devices.