scispace - formally typeset
Journal ArticleDOI

Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry

David White, +2 more
- 01 Sep 2003 - 
- Vol. 53, Iss: 7, pp 619-631
Reads0
Chats0
TLDR
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing as mentioned in this paper.
Abstract
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing. In this paper, the theory underlying this system is described, and the performance is validated. Digital photography is used to capture images of planar soil deformation. Using PIV, the movement of a fine mesh of soil patches is measured to a high precision. Since PIV operates on the image texture, intrusive target markers need not be installed in the observed soil. The resulting displacement vectors are converted from image space to object space using a photogrammetric transformation. A series of validation experiments are reported. These demonstrate that the precision, accuracy and resolution of the system are an order of magnitude higher than previous image-based deformation methods, and are comparable to local instrumentation used in element testing. This performance is achieved concurrent with an order of magnitude increase in the number of meas...

read more

Citations
More filters
Journal ArticleDOI

Application of ECT to solid concentration measurements during granular flow in a rectangular model silo

TL;DR: In this paper, the results of concentration changes in cohesionless sand during dynamic mass flow in a rectangular model silo composed of a bin and a hopper were used to determine local horizontal one-dimensional and cross-sectional two-dimensional evolutions of solid concentrations in dry sand during silo discharge.
Journal ArticleDOI

Centrifuge model tests on sand specimen under extensional load

TL;DR: In this paper, the influence of the stress level on the geometry of a shear band pattern, specified by the spacing of the shear bands and the angle between failure surfaces and minor stress direction, has been investigated.
Journal ArticleDOI

Load Transfer Mechanisms of Granular Cushion between Column Foundation and Rigid Raft

TL;DR: The granular cushion has been increasingly used as a load transfer platform between a column foundation and a raft to ensure appropriate contact and load transfer among the raft, the column, and the column as mentioned in this paper.
Journal ArticleDOI

Additive manufacturing and computed tomography of bio-inspired anchorage systems

TL;DR: Using additive manufacturing, computer-assisted models can be rapidly transformed into physical objects and when combined with X-ray imaging, minimally attenuating three-dimensional (3D) printed objects are created.
Journal ArticleDOI

Introducing advanced topics in geotechnical engineering teaching - tunnel modelling

TL;DR: In this paper, the authors demonstrate a strategy to integrate research into teaching at a postgraduate level, which involves the use of simple small-scale physical models of a tunnel heading, the introduction of particle image velocimetry, an advanced computing technique used to further visualize the movement of soil, and a numerical model of the tunnel heading.
References
More filters
Journal ArticleDOI

Particle-Imaging Techniques for Experimental Fluid Mechanics

TL;DR: A review of these methods can be found in articles by Lauterborn & Vogel (1984), Adrian (1986a), Hesselink (1988), and Dudderar et al..
Proceedings ArticleDOI

A four-step camera calibration procedure with implicit image correction

TL;DR: This paper presents a four-step calibration procedure that is an extension to the two-step method, and a linear method for solving the parameters of the inverse model is presented.
Proceedings ArticleDOI

Calibration procedure for short focal length off-the-shelf CCD cameras

TL;DR: A camera calibration procedure intended for a 3D measurement application is presented, paying attention to the various error sources, and notices that a more complete camera model is needed to explain all the error components.
Journal ArticleDOI

A review of instrumentation for measuring small strains during triaxial testing of soil specimens

TL;DR: In this article, the authors present a survey of small-strain measuring devices and their modes of operation, benefits, capabilities, and limitations, as well as a classification of internal and external measuring devices.