scispace - formally typeset
Journal ArticleDOI

Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry

David White, +2 more
- 01 Sep 2003 - 
- Vol. 53, Iss: 7, pp 619-631
Reads0
Chats0
TLDR
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing as mentioned in this paper.
Abstract
A deformation measurement system based on particle image velocimetry (PIV) and close-range photogrammetry has been developed for use in geotechnical testing. In this paper, the theory underlying this system is described, and the performance is validated. Digital photography is used to capture images of planar soil deformation. Using PIV, the movement of a fine mesh of soil patches is measured to a high precision. Since PIV operates on the image texture, intrusive target markers need not be installed in the observed soil. The resulting displacement vectors are converted from image space to object space using a photogrammetric transformation. A series of validation experiments are reported. These demonstrate that the precision, accuracy and resolution of the system are an order of magnitude higher than previous image-based deformation methods, and are comparable to local instrumentation used in element testing. This performance is achieved concurrent with an order of magnitude increase in the number of meas...

read more

Citations
More filters
Journal ArticleDOI

Effect of Surface Roughness on the Shaft Resistance of Displacement Model Piles in Sand

TL;DR: In this paper, the results of tensile load tests performed with instrumented model piles with different surface roughnesses jacked into sand samples in a half-circular calibration cham is presented.
Journal ArticleDOI

Experimental and analytical investigations on bearing capacity of strip footing in reinforced sand backfills and flexible retaining wall

TL;DR: In this article, a set of tests were conducted with and without reinforcement on the top of the backfill and the results indicated that a reinforcing top zone of the flexible retaining structures may be more appropriate than unreinforced case.
Journal ArticleDOI

Observations of Stresses and Strains in a Granular Material

TL;DR: The use of glass ballotini as a granular material provides the opportunity to simultaneously study internal stress fields and internal fields of deformation as a sample is submitted to boundary perturbations as discussed by the authors.
References
More filters
Journal ArticleDOI

Particle-Imaging Techniques for Experimental Fluid Mechanics

TL;DR: A review of these methods can be found in articles by Lauterborn & Vogel (1984), Adrian (1986a), Hesselink (1988), and Dudderar et al..
Proceedings ArticleDOI

A four-step camera calibration procedure with implicit image correction

TL;DR: This paper presents a four-step calibration procedure that is an extension to the two-step method, and a linear method for solving the parameters of the inverse model is presented.
Proceedings ArticleDOI

Calibration procedure for short focal length off-the-shelf CCD cameras

TL;DR: A camera calibration procedure intended for a 3D measurement application is presented, paying attention to the various error sources, and notices that a more complete camera model is needed to explain all the error components.
Journal ArticleDOI

A review of instrumentation for measuring small strains during triaxial testing of soil specimens

TL;DR: In this article, the authors present a survey of small-strain measuring devices and their modes of operation, benefits, capabilities, and limitations, as well as a classification of internal and external measuring devices.