scispace - formally typeset
Journal ArticleDOI

The Development and Future of Lithium Ion Batteries

George E. Blomgren
- 01 Jan 2017 - 
- Vol. 164, Iss: 1
Reads0
Chats0
TLDR
This year, the battery industry celebrated the 25th anniversary of the introduction of the lithium ion rechargeable battery by Sony as discussed by the authors, which used a combination of lower temperature carbons for the negative electrode to prevent solvent degradation and lithium cobalt dioxide modified somewhat from Goodenough's earlier work.
Abstract
This year, the battery industry celebrates the 25th anniversary of the introduction of the lithium ion rechargeable battery by Sony Corporation. The discovery of the system dates back to earlier work by Asahi Kasei in Japan, which used a combination of lower temperature carbons for the negative electrode to prevent solvent degradation and lithium cobalt dioxide modified somewhat from Goodenough’s earlier work. The development by Sony was carried out within a few years by bringing together technology in film coating from their magnetic tape division and electrochemical technology from their battery division. The past 25 years has shown rapid growth in the sales and in the benefits of lithium ion in comparison to all the earlier rechargeable battery systems. Recent work on new materials shows that there is a good likelihood that the lithium ion battery will continue to improve in cost, energy, safety and power capability and will be a formidable competitor for some years to come. © The Author(s) 2016. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. [DOI: 10.1149/2.0251701jes] All rights reserved.

read more

Citations
More filters
Journal ArticleDOI

30 Years of Lithium-Ion Batteries.

TL;DR: The main roles of material science in the development of LIBs are discussed, with a statement of caution for the current modern battery research along with a brief discussion on beyond lithium-ion battery chemistries.
Journal ArticleDOI

Performance and cost of materials for lithium-based rechargeable automotive batteries

TL;DR: In this article, the state-of-the-art advances in active materials, electrolytes and cell chemistries for automotive batteries are surveyed, along with an assessment of the potential to fulfil the ambitious targets of electric vehicle propulsion.
Journal ArticleDOI

From Lithium-Ion to Sodium-Ion Batteries: Advantages, Challenges, and Surprises.

TL;DR: This review provides a state-of-the art overview on the redox behavior of materials when used as electrodes in lithium-ion and sodium-ion batteries, respectively.
Journal ArticleDOI

Before Li Ion Batteries

TL;DR: This Review covers a sequence of key discoveries and technical achievements that eventually led to the birth of the lithium-ion battery and sheds light on the history with the advantage of contemporary hindsight to aid in the ongoing quest for better batteries of the future.
Journal ArticleDOI

A cost and resource analysis of sodium-ion batteries

TL;DR: The background leading to such promises is carefully assessed in terms of cell and battery production, as well as raw material supply risks, for sodium-ion and modern lithium-ion batteries as mentioned in this paper.
References
More filters
Journal ArticleDOI

Ambient temperature rechargeable polymer-electrolyte batteries

TL;DR: Li+conductive solid polymer electrolytes with room temperature conductivities of about 2 × 10−3 Ω−1 cm−1 have been developed as discussed by the authors, which have shown room temperature performance reminiscent of their liquid electrolyte counterparts.
Journal ArticleDOI

The role of composition in the atomic structure, oxygen loss, and capacity of layered Li–Mn–Ni oxide cathodes

TL;DR: Li et al. as mentioned in this paper investigated the role of composition with increasing excess Li on the degree of oxygen loss during the first charge and the discharge capacity in subsequent cycles, showing that the maximum oxygen loss and discharge capacity are achieved with a single C2/m phase.
Journal ArticleDOI

Solid-State NMR on the Family of Positive Electrode Materials Li_2Ru_{1-y}Sn_yO_3 for Li-ion batteries

TL;DR: In this paper, the possibilities offered by ex situ and in situ operando 7Li solid-state nuclear magnetic resonance (NMR) are explored for the Li2Ru1-ySnyO3 family, shown previously to display cationic and anionic redox activity when used as a positive electrode for Li-ion batteries.
Patent

Non aqueous electrolyte cell

TL;DR: In this paper, an improved nonaqueous electrolyte cell is disclosed in which specific carbonaceous material is used as an anode, which has interlayer spacing d 002 of not less than 3.70 A, true density not larger than 1.70 g/cm 3 and no exothermic peak not less less than 700° C. upon differential thermal analysis under air stream.
Patent

Non-aqueous electrolyte cell

TL;DR: A non-aqueous electrolyte cell having high discharge capacity, an improved capacity upkeep ratio and optimum cyclic characteristics is defined in this article, where the ratio of an inner diameter d to an outer diameter D of cell device is selected so that 0.05
Related Papers (5)