scispace - formally typeset
Journal ArticleDOI

The Development and Future of Lithium Ion Batteries

George E. Blomgren
- 01 Jan 2017 - 
- Vol. 164, Iss: 1
Reads0
Chats0
TLDR
This year, the battery industry celebrated the 25th anniversary of the introduction of the lithium ion rechargeable battery by Sony as discussed by the authors, which used a combination of lower temperature carbons for the negative electrode to prevent solvent degradation and lithium cobalt dioxide modified somewhat from Goodenough's earlier work.
Abstract
This year, the battery industry celebrates the 25th anniversary of the introduction of the lithium ion rechargeable battery by Sony Corporation. The discovery of the system dates back to earlier work by Asahi Kasei in Japan, which used a combination of lower temperature carbons for the negative electrode to prevent solvent degradation and lithium cobalt dioxide modified somewhat from Goodenough’s earlier work. The development by Sony was carried out within a few years by bringing together technology in film coating from their magnetic tape division and electrochemical technology from their battery division. The past 25 years has shown rapid growth in the sales and in the benefits of lithium ion in comparison to all the earlier rechargeable battery systems. Recent work on new materials shows that there is a good likelihood that the lithium ion battery will continue to improve in cost, energy, safety and power capability and will be a formidable competitor for some years to come. © The Author(s) 2016. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. [DOI: 10.1149/2.0251701jes] All rights reserved.

read more

Citations
More filters
Journal ArticleDOI

Lithium-ion cell equivalent circuit model identification by galvanostatic intermittent titration technique

TL;DR: In this article , a parameter identification method using galvanostatic intermittent titration technique (GITT) is presented to create high resolution look-up tables and response surfaces for equivalent circuit models (ECM).
Journal ArticleDOI

Morphologically controllable Li plating with stable electrochemistry realized in a newly developed DOL-DMM electrolyte system on Au-modified Cu current collector

TL;DR: In this paper, micro-spheric Li was successfully deposited on gold (Au) element modified copper (Cu) foil in a newly developed 1,3-dioxolane/dimethoxymethane (DOL-DMM) electrolyte system under optimum conditions.
Journal ArticleDOI

Mesoscale transport-geometry interactions in lithium ion cathode active materials: Particle scale galvanostatic simulations based on X-ray nanotomography data

TL;DR: In this article, simulation results of lithium diffusion in Li(Ni 1/3Mn1/3Co 1 /3 )O2 under galvanostatic discharge (intercalation) conditions are presented for a set of cathode active material particles imaged using X-ray nanotomography.
Journal ArticleDOI

Laser sintering technique to fabricate nano-Sn/graphite anode for lithium ion batteries: Microstructures and electrochemical properties

TL;DR: In this paper, the nano-Sn/Graphite anodes for lithium-ion batteries are successfully fabricated by the method of laser sintering on the copper current collectors, and microstructures and electrochemical properties of the electrodes are investigated in details.
References
More filters
Journal ArticleDOI

Lithium Batteries and Cathode Materials

TL;DR: This paper will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior.
Journal ArticleDOI

LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density

TL;DR: In this paper, a new system LixCoO2 (0 Li x CoO 2 Li ) is proposed, which shows low overvoltages and good reversibility for current densities up to 4 mA cm−2 over a large range of x.
Journal ArticleDOI

A review on the separators of liquid electrolyte Li-ion batteries

TL;DR: In this paper, the separators used in liquid electrolyte Li-ion batteries are classified into three groups: microporous polymer membranes, non-woven fabric mats and inorganic composite membranes.
Journal ArticleDOI

Studies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells

TL;DR: In this paper, Li/graphite and Li/petroleum coke cells using a in a 50:50 mixture of propylene carbonate (PC) and ethylene carbonates (EC) electrolyte exhibit irreversible reactions only on the first discharge.
Journal ArticleDOI

The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials

TL;DR: It is demonstrated how very specific local Li-excess environments around oxygen atoms necessarily lead to labile oxygen electrons that can be more easily extracted and participate in the practical capacity of cathodes.
Related Papers (5)