Journal ArticleDOI
The impact of AA7075 cold spray coating on the fatigue life of AZ31B cast alloy
Reads0
Chats0
TLDR
To improve the fatigue resistance of magnesium alloys, AA7075 powder, which has high fatigue strength and high adhesion strength, was successfully coated on as-cast AZ31B substrate as mentioned in this paper.Abstract:
To improve the fatigue resistance of magnesium alloys, AA7075 powder, which has high fatigue strength and high adhesion strength, was successfully coated on as-cast AZ31B substrate. The coating proved to be dense, with a porosity ofread more
Citations
More filters
Journal ArticleDOI
Deposition of fully dense Al-based coatings via in-situ micro-forging assisted cold spray for excellent corrosion protection of AZ31B magnesium alloy
TL;DR: In this article, three types of fully dense aluminum-based (Al) coatings (pure Al, AA2219 and AA6061) were deposited on AZ31B magnesium (Mg) alloy by a recently developed in-situ micro-forging assisted cold spray process.
Journal ArticleDOI
Microstructure, microhardness and tribological behavior of Al2O3 reinforced A380 aluminum alloy composite coatings prepared by cold spray technique
Xiang Qiu,Xiang Qiu,Naeem ul Haq Tariq,Naeem ul Haq Tariq,Jiqiang Wang,Junrong Tang,Junrong Tang,Lawrence Gyansah,Zhipo Zhao,Zhipo Zhao,Tianying Xiong +10 more
TL;DR: In this article, the effect of Al2O3 content on surface roughness, microstructure, microhardness and tribological performance of composite coatings was studied using laser confocal imaging, optical microscopy, and scanning electron microscopy (SEM) results.
Journal ArticleDOI
Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification
TL;DR: In this article, the role of FSP on the performance of cold spray coatings as a post-processing technique to promote densification and homogenization during processing by promoting nano-scale interfacial mechanisms and chemical bonding at the interface.
Journal ArticleDOI
Numerical modelling of particle impact and residual stresses in cold sprayed coatings: A review
TL;DR: In this article, a review of the experimental techniques used for residual stress measurements; such as X-ray diffraction, neutron diffraction and material removal, curvature measurement and deformation techniques, are concisely reviewed from the context of being applied to cold spray deposits.
Journal ArticleDOI
Fatigue performance of cold spray deposits: Coating, repair and additive manufacturing cases
Sara Bagherifard,Mario Guagliano +1 more
TL;DR: In this paper, the current state of the art on the contribution of various forms of cold spray deposits to fatigue strength is reviewed and future perspectives for enhancing their structural integrity and promising trends are discussed.
References
More filters
Book
Introduction to Statistical Analysis
Wilfrid J. Dixon,Frank J. Massey +1 more
TL;DR: In this paper, the authors introduce statistical analysis and introduce the concept of statistical analysis in statistical analysis, and propose a framework for statistical analysis for the analysis of statistical data in the literature.
Journal ArticleDOI
Magnesium and its alloys applications in automotive industry
TL;DR: In this article, the authors reviewed and evaluated the applications of magnesium in the automotive industry that can significantly contribute to greater fuel economy and environmental conservation, and concluded that reasonable prices and improved properties of Mg and its alloys will lead to massive use of magnesium.
Journal ArticleDOI
Research for a new age of magnesium in the automotive industry
H Friedrich,S Schumann +1 more
TL;DR: In this paper, the authors present research strategies for bringing about a new age of magnesium by means of the vehicle modules drive train, interior, body and chassis, differentiated according to the time frame and conceivable likelihood of realisation.
Journal ArticleDOI
Towards magnesium alloys for high-volume automotive applications
TL;DR: In this paper, a brief review of historical trends in vehicle weight and automotive magnesium is presented, followed by a discussion of manufacturing and processing, in-service performance, and cost requirements.
Journal ArticleDOI
A Review on Casting Magnesium Alloys: Modification of Commercial Alloys and Development of New Alloys
TL;DR: In this article, the research and development status of casting magnesium alloys including the commercial casting alloys and the new types casting alloy are reviewed, with more attention to microstructure and mechanical properties of modified-AZ91, AM60 and WE43 alloys with various additions.