Journal ArticleDOI
The metallurgy of zinc-coated steel
TLDR
In this article, a review of the metallurgy of zinc-coated steel from a scientific standpoint to develop relationships to practical applications is presented. And the effect of the microstructures of these coatings on the important properties of corrosion, formability, weldability and paintability is discussed.About:
This article is published in Progress in Materials Science.The article was published on 2000-06-01. It has received 1194 citations till now. The article focuses on the topics: Coating & Galvanization.read more
Citations
More filters
Journal ArticleDOI
Anticorrosive coatings: a review
TL;DR: In this article, a review of the state-of-the-art in anticorrosive coatings systems is presented, which mainly deals with European experience and practice, including a description of the different environments an anticorerosive coating system may encounter during service.
Journal ArticleDOI
Corrosion resistance of zinc–magnesium coated steel
TL;DR: A review of the literature and identifying key themes in the reported mechanisms for the attractive properties of zinc-magnesium coated steel (ZMG) can be found in this article, where a 3-fold increase in time to red rust compared to conventional zinc-coated steel was measured.
Journal ArticleDOI
A review on recent approaches in the field of hot dip zinc galvanizing process
TL;DR: In this article, the recent developments in the field of hot dip zinc coating are reviewed with special reference to different industrial applications and the improvements in physical and chemical structural composition due to pre- and post-modification processes are discussed.
Journal ArticleDOI
Study on laser welding-brazing of zinc coated steel to aluminum alloy with a zinc based filler
TL;DR: In this article, a laser welding-brazing technique with CW Nd:YAG laser was used for lap joining of zinc coated steel (DP600) with aluminum alloy (AA6016) using a filler wire composed of 85% Zn and 15% Al.
Journal ArticleDOI
Intermetallic FexAly-phases in a steel/Al-alloy fusion weld
Leonardo Agudo,Leonardo Agudo,D. Eyidi,D. Eyidi,Christian H. Schmaranzer,Enno Arenholz,Nasrin Jank,Jürgen Bruckner,Anke Pyzalla,Anke Pyzalla +9 more
TL;DR: In this article, the microstructure of joints between an Al-alloy and a zinc coated ferritic steel sheet manufactured by the so-called CMT joining method is investigated.
References
More filters
Book
Binary alloy phase diagrams
TL;DR: Binary Alloy Phase Diagrams, Second Edition, Plus Updates, on CD-ROM offers you the same high-quality, reliable data you'll find in the 3-volume print set published by ASM in 1990.
Book
Corrosion and electrochemistry of zinc
TL;DR: In this article, the authors present properties, products, and processes of corrosion in water and aqueous solutions, such as surface film formation, under paint and concrete, as well as in other environments.
Journal ArticleDOI
Microstructural Characterization of Bombyx mori Silk Fibers
TL;DR: The microstructure of Bombyx mori silk fibers before and after degumming was examined by transmission electron microscopy (TEM), selected area electron diffraction (SAED), wide-angle X-ray scattering (WAXS), and lowvoltage high-resolution scanning electron microscope (LVHRSEM).
Journal ArticleDOI
Solidification and spangle formation of hot-dip-galvanized zinc coatings
J. Strutzenberger,J. Faderl +1 more
TL;DR: In this article, a solidification model for hot dip coatings was derived based on optical and microscopic properties of the liquid zinc surface, including optical properties, distribution of Pb and Al, crystal orientation, and topography.
Related Papers (5)
Fe-Zn phase formation in interstitial-free steels hot-dip galvanized at 450°C: Part II 0.20 wt% Al-Zn baths
C. E. Jordan,Arnold R. Marder +1 more
Solidification and spangle formation of hot-dip-galvanized zinc coatings
J. Strutzenberger,J. Faderl +1 more