Journal ArticleDOI
Twenty-year uninterrupted endeavor of friction stir processing by focusing on copper and its alloys
Mahmoud Ebrahimi,M.A. Par +1 more
TLDR
In this article, the authors reviewed friction stir processing (FSP), which is a prominent severe plastic deformation technique used to improve materials behaviors through grain refinement, and found that FSP has the capability to provide superior properties for single-phase and multiphase materials and even for the metal matrix composites.About:
This article is published in Journal of Alloys and Compounds.The article was published on 2019-04-15. It has received 59 citations till now. The article focuses on the topics: Friction stir processing.read more
Citations
More filters
Journal ArticleDOI
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
Akbar Heidarzadeh,Sergey Mironov,Rustam Kaibyshev,Gürel Çam,Aude Simar,Adrian P. Gerlich,Farzad Khodabakhshi,Amir Mostafaei,David P. Field,Joseph D. Robson,Alexis Deschamps,Philip J. Withers +11 more
TL;DR: In this article, a comprehensive understanding of the fundamentals of the microstructural evolution during FSW/P has been developed, including the mechanisms underlying the development of grain structures and textures, phases, phase transformations and precipitation.
Journal ArticleDOI
Influence of cooling media in achieving grain refinement of AA2014 alloy using friction stir processing
TL;DR: In this paper, the influence of different cooling media (water and cryogenic media) on microstructure, mechanical, and corrosion behavior of friction stir processing of AA2014 was studied.
Journal ArticleDOI
Robust fluorescent calcium coordination polymers as Cu2+ sensors with high sensitivity and fast response
Zhao-Feng Wu,Ever Velasco,Chuan Shan,Kui Tan,Zhi-Zhuan Zhang,Qianqian Hu,Kai Xing,Xiao-Ying Huang,Jing Li +8 more
TL;DR: In this article, a 3D and highly fluorescent calcium-based coordination polymer (Ca-CP) has been synthesized and structurally characterized, which exhibits selective FL sensing for Cu2+ ions with a detection limit of 0.064 ppm, far below the U.S. WHO and EPA standard for drinking water.
Journal ArticleDOI
Strain uniformity footprint on mechanical performance and erosion-corrosion behavior of equal channel angular pressed pure titanium
Sh. Attarilar,Faramarz Djavanroodi,Faramarz Djavanroodi,Osama M. Irfan,Osama M. Irfan,Fahad A. Al-Mufadi,Mahmoud Ebrahimi,Q.D. Wang +7 more
TL;DR: In this paper, the effect of equal channel angular pressing (ECAP) on microstructure, mechanical, and erosion-corrosion behavior of commercial pure (CP) titanium was investigated through experimental work.
Journal ArticleDOI
Effect of Overlapping Friction Stir Processing on Microstructure, Mechanical Properties and Corrosion Behavior of AA6061 Alloy
TL;DR: In this article, the influence of five-pass overlapping friction stir processing (FSP) on microstructure, mechanical properties and corrosion behavior of AA6061 alloy was studied.
References
More filters
Book
Friction Stir Welding and Processing
Rajiv S. Mishra,Zongyi Ma +1 more
TL;DR: Friction stir welding (FSW) is a relatively new solid-state joining process that is used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding as discussed by the authors.
Journal ArticleDOI
Principles of equal-channel angular pressing as a processing tool for grain refinement
TL;DR: In this article, a review examines recent developments related to the use of ECAP for grain refinement including modifying conventional ECAP to increase the process efficiency and techniques for up-scaling the procedure and for the processing of hard-to-deform materials.
Journal ArticleDOI
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
TL;DR: In this paper, the evolution of the new microstructures produced by two types of dynamic recrystallization is reviewed, including those brought about by severe plastic deformation (SPD).
Journal ArticleDOI
Producing bulk ultrafine-grained materials by severe plastic deformation
Ruslan Z. Valiev,Yuri Estrin,Zenji Horita,Zenji Horita,Terence G. Langdon,Michael J. Zehetbauer,Yuntian Zhu +6 more
TL;DR: In this article, an overview of recent achievements and new trends in the production of bulk ultrafine-grained (UFG) materials using severe plastic deformation (SPD) is presented.
Journal ArticleDOI
Friction stir processing technology: A review
TL;DR: Friction stir welding (FSW) is an emerging metalworking technique that can provide localized modification and control of microstructures in near-surface layers of processed metallic components.