Gallium nitride (GaN) and its allied binaries InN and AIN as well as their ternary compounds have gained an unprecedented attention due to their wide-ranging applications encompassing green, blue, violet, and ultraviolet (UV) emitters and detectors (in photon ranges inaccessible by other semiconductors) and high-power amplifiers. However, even the best of the three binaries, GaN, contains many structural and point defects caused to a large extent by lattice and stacking mismatch with substrates. These defects notably affect the electrical and optical properties of the host material and can seriously degrade the performance and reliability of devices made based on these nitride semiconductors. Even though GaN broke the long-standing paradigm that high density of dislocations precludes acceptable device performance, point defects have taken the center stage as they exacerbate efforts to increase the efficiency of emitters, increase laser operation lifetime, and lead to anomalies in electronic devices. The p...

/pdf/luminescence-properties-of-defects-in-gan-4hjs241x7f.pdf

Luminescence properties of defects in GaN

Wide bandgap semiconductors show superior material properties enabling potential power device operation at higher temperatures, voltages, and switching speeds than current Si technology. As a result, a new generation of power devices is being developed for power converter applications in which traditional Si power devices show limited operation. The use of these new power semiconductor devices will allow both an important improvement in the performance of existing power converters and the development of new power converters, accounting for an increase in the efficiency of the electric energy transformations and a more rational use of the electric energy. At present, SiC and GaN are the more promising semiconductor materials for these new power devices as a consequence of their outstanding properties, commercial availability of starting material, and maturity of their technological processes. This paper presents a review of recent progresses in the development of SiC- and GaN-based power semiconductor devices together with an overall view of the state of the art of this new device generation.

A Survey of Wide Bandgap Power Semiconductor Devices

An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.

Semiconductor device, and manufacturing method thereof

and Perspectives Sophie Carenco,†,‡,§,∥,⊥ David Portehault,*,†,‡,§ Ced́ric Boissier̀e,†,‡,§ Nicolas Meźailles, and Cleḿent Sanchez*,†,‡,§ †Chimie de la Matier̀e Condenseé de Paris, UPMC Univ Paris 06, UMR 7574, Colleg̀e de France, 11 Place Marcelin Berthelot, 75231 Paris Cedex 05, France ‡Chimie de la Matier̀e Condenseé de Paris, CNRS, UMR 77574, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Chimie de la Matier̀e Condenseé de Paris, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Laboratory Heteroelements and Coordination, Chemistry Department, Ecole Polytechnique, CNRS-UMR 7653, Palaiseau, France

Nanoscaled metal borides and phosphides: recent developments and perspectives

Silicon carbide (SiC) power devices have been investigated extensively in the past two decades, and there are many devices commercially available now. Owing to the intrinsic material advantages of SiC over silicon (Si), SiC power devices can operate at higher voltage, higher switching frequency, and higher temperature. This paper reviews the technology progress of SiC power devices and their emerging applications. The design challenges and future trends are summarized at the end of the paper.

https://ieeexplore.ieee.org/ielaam/41/8031005/7815312-aam.pdf

Review of Silicon Carbide Power Devices and Their Applications

Electrical Characteristics of Gated-Anode Diode for Rectenna Using Normally-Off GaN HEMT

Zirconium diboride (ZrB2) is a promising lattice-matched substrate for GaN-based materials. A key issue to realize high-quality heteroepitaxial growth is preparation of the substrate surface. The ZrB2 surface was studied by x-ray photoemission spectroscopy (XPS) and reflection high-energy electron diffraction (RHEED). XPS results indicated the presence of both ZrO2 and ZrB2 on the as-received substrate surface. Thermal cleaning at 1000°C in ultra-high vacuum, Ar+ ion sputtering, and wet chemical treatments were examined as surface preparation methods. After treatment with HF acid, the O peak intensity was much reduced. The combination of HF treatment and thermal cleaning resulted in sharp and intense RHEED from the ZrB2 surface. GaN grown on the surface by molecular-beam epitaxy exhibited intense photoluminescence, suggesting that this treatment is effective to obtain high-quality GaN on ZrB2 substrates.

Surface Control of ZrB2 (0001) Substrate for Molecular-Beam Epitaxy of GaN

Characteristics of high-voltage lateral silicon carbide metal-oxide-semiconductor field-effect transistors (MOSFETs) with various reduced surface field (RESURF) structures were simulated. Breakdown voltage was enhanced from 5300 V for single-zone RESURF to 7400 V for two-zone, and to 7600 V for quasi-modulated RESURF MOSFETs.

Designing of Quasi-Modulated Region in 4H-SiC Lateral RESURF MOSFETs

Si ions were implanted into homoepitaxial n-type GaN at a peak concentration of 3 × 1014 cm−3 with subsequent annealing, and the associated formation of electron traps was investigated in detail using deep-level transient spectroscopy. A major electron trap was identified as 0.26 eV below the conduction band minimum and this trap concentration increased with increasing post-implantation annealing temperature, to a value of 6–8 × 1015 cm−3. Significant increases in the net donor concentration (N D) were also observed within the implanted region. The profile of the electron trap concentration was correlated with these increases in N D, suggesting that these traps acted as donors.

Jun Suda

Papers

Electrical Characteristics of Gated-Anode Diode for Rectenna Using Normally-Off GaN HEMT

Surface Control of ZrB2 (0001) Substrate for Molecular-Beam Epitaxy of GaN

Designing of Quasi-Modulated Region in 4H-SiC Lateral RESURF MOSFETs

Depth profiling of E C – 0.26 eV electron traps introduced in homoepitaxial n-type GaN by ultra-low-dose Si-ion implantation and subsequent annealing

Measurement of Electron and Hole Impact Ionization Coefficients in GaN