Showing papers in "arXiv: Signal Processing in 2017"

Graph Signal Processing: Overview, Challenges and Applications

Abstract: Research in Graph Signal Processing (GSP) aims to develop tools for processing data defined on irregular graph domains. In this paper we first provide an overview of core ideas in GSP and their connection to conventional digital signal processing. We then summarize recent developments in developing basic GSP tools, including methods for sampling, filtering or graph learning. Next, we review progress in several application areas using GSP, including processing and analysis of sensor network data, biological data, and applications to image processing and machine learning. We finish by providing a brief historical perspective to highlight how concepts recently developed in GSP build on top of prior research in other areas.

Cache Placement in Fog-RANs: From Centralized to Distributed Algorithms

Abstract: To deal with the rapid growth of high-speed and/or ultra-low latency data traffic for massive mobile users, fog radio access networks (Fog-RANs) have emerged as a promising architecture for next-generation wireless networks. In Fog-RANs, the edge nodes and user terminals possess storage, computation and communication functionalities to various degrees, which provides high flexibility for network operation, i.e., from fully centralized to fully distributed operation. In this paper, we study the cache placement problem in Fog-RANs, by taking into account flexible physical-layer transmission schemes and diverse content preferences of different users. We develop both centralized and distributed transmission aware cache placement strategies to minimize users' average download delay subject to the storage capacity constraints. In the centralized mode, the cache placement problem is transformed into a matroid constrained submodular maximization problem, and an approximation algorithm is proposed to find a solution within a constant factor to the optimum. In the distributed mode, a belief propagation based distributed algorithm is proposed to provide a suboptimal solution, with iterative updates at each BS based on locally collected information. Simulation results show that by exploiting caching and cooperation gains, the proposed transmission aware caching algorithms can greatly reduce the users' average download delay.

Distributed Laser Charging: A Wireless Power Transfer Approach

Abstract: Wireless power transfer (WPT) is a promising solution to provide convenient and perpetual energy supplies to electronics. Traditional WPT technologies face the challenge of providing Watt-level power over meter-level distance for Internet of Things (IoT) and mobile devices, such as sensors, controllers, smart-phones, laptops, etc.. Distributed laser charging (DLC), a new WPT alternative, has the potential to solve these problems and enable WPT with the similar experience as WiFi communications. In this paper, we present a multi-module DLC system model, in order to illustrate its physical fundamentals and mathematical formula. This analytical modeling enables the evaluation of power conversion or transmission for each individual module, considering the impacts of laser wavelength, transmission attenuation and photovoltaic-cell (PV-cell) temperature. Based on the linear approximation of electricity-to-laser and laser-to-electricity power conversion validated by measurement and simulation, we derive the maximum power transmission efficiency in closed-form. Thus, we demonstrate the variation of the maximum power transmission efficiency depending on the supply power at the transmitter, laser wavelength, transmission distance, and PV-cell temperature. Similar to the maximization of information transmission capacity in wireless information transfer (WIT), the maximization of the power transmission efficiency is equally important in WPT. Therefore, this work not only provides the insight of DLC in theory, but also offers the guideline of DLC system design in practice.

Downlink Power Allocation for CoMP-NOMA in Multi-Cell Networks

Abstract: This work considers the problem of dynamic power allocation in the downlink of multi-cell networks, where each cell utilizes non-orthogonal multiple access (NOMA)-based resource allocation. Also, coordinated multi-point (CoMP) transmission is utilized among multiple cells to serve users experiencing severe inter-cell interference (ICI). More specifically, we consider a two-tier heterogeneous network (HetNet) consisting of a high-power macro cell underlaid with multiple low-power small cells each of which uses the same resource block. Under this {\em CoMP-NOMA framework}, CoMP transmission is applied to a user experiencing high channel gain with multiple base stations (BSs)/cells, while NOMA is utilized to schedule CoMP and non-CoMP users over the same transmission resources, i.e., time, spectrum and space. Different CoMP-NOMA models are discussed, but focus is primarily on the joint transmission CoMP-NOMA (JT-CoMP-NOMA) model. For the JT-CoMP-NOMA model, an optimal joint power allocation problem is formulated and the solution is derived for each CoMP-set consisting of multiple cooperating BSs (i.e., CoMP BSs). To overcome the substantial computational complexity of the joint power optimization approach, we propose a distributed power optimization problem at each cooperating BS whose optimal solution is independent of the solution of other coordinating BSs. The validity of the distributed solution for the joint power optimization problem is provided and numerical performance evaluation is carried out for the proposed CoMP-NOMA models including JT-CoMP-NOMA and coordinated scheduling CoMP-NOMA (CS-CoMP-NOMA). The obtained results reveal significant gains in spectral and energy efficiency in comparison with conventional CoMP-orthogonal multiple access (CoMP-OMA) systems.

Design of Graph Filters and Filterbanks

Abstract: Basic operations in graph signal processing consist in processing signals indexed on graphs either by filtering them or by changing their domain of representation, in order to better extract or analyze the important information they contain. The aim of this chapter is to review general concepts underlying such filters and representations of graph signals. We first recall the different Graph Fourier Transforms that have been developed in the literature, and show how to introduce a notion of frequency analysis for graph signals by looking at their variations. Then, we move to the introduction of graph filters, that are defined like the classical equivalent for 1D signals or 2D images, as linear systems which operate on each frequency of a signal. Some examples of filters and of their implementations are given. Finally, as alternate representations of graph signals, we focus on multiscale transforms that are defined from filters. Continuous multiscale transforms such as spectral wavelets on graphs are reviewed, as well as the versatile approaches of filterbanks on graphs. Several variants of graph filterbanks are discussed, for structured as well as arbitrary graphs, with a focus on the central point of the choice of the decimation or aggregation operators.

Performance Bounds for Parameter Estimation under Misspecified Models: Fundamental findings and applications

Abstract: Inferring information from a set of acquired data is the main objective of any signal processing (SP) method. In particular, the common problem of estimating the value of a vector of parameters from a set of noisy measurements is at the core of a plethora of scientific and technological advances in the last decades; for example, wireless communications, radar and sonar, biomedicine, image processing, and seismology, just to name a few. Developing an estimation algorithm often begins by assuming a statistical model for the measured data, i.e. a probability density function (pdf) which if correct, fully characterizes the behaviour of the collected data/measurements. Experience with real data, however, often exposes the limitations of any assumed data model since modelling errors at some level are always present. Consequently, the true data model and the model assumed to derive the estimation algorithm could differ. When this happens, the model is said to be mismatched or misspecified. Therefore, understanding the possible performance loss or regret that an estimation algorithm could experience under model misspecification is of crucial importance for any SP practitioner. Further, understanding the limits on the performance of any estimator subject to model misspecification is of practical interest. Motivated by the widespread and practical need to assess the performance of a mismatched estimator, the goal of this paper is to help to bring attention to the main theoretical findings on estimation theory, and in particular on lower bounds under model misspecification, that have been published in the statistical and econometrical literature in the last fifty years. Secondly, some applications are discussed to illustrate the broad range of areas and problems to which this framework extends, and consequently the numerous opportunities available for SP researchers.

Optimal Experiment Design for Magnetic Resonance Fingerprinting: Cram\'er-Rao Bound Meets Spin Dynamics

Abstract: Magnetic resonance (MR) fingerprinting is a new quantitative imaging paradigm, which simultaneously acquires multiple MR tissue parameter maps in a single experiment. In this paper, we present an estimation-theoretic framework to perform experiment design for MR fingerprinting. Specifically, we describe a discrete-time dynamic system to model spin dynamics, and derive an estimation-theoretic bound, i.e., the Cramer-Rao bound (CRB), to characterize the signal-to-noise ratio (SNR) efficiency of an MR fingerprinting experiment. We then formulate an optimal experiment design problem, which determines a sequence of acquisition parameters to encode MR tissue parameters with the maximal SNR efficiency, while respecting the physical constraints and other constraints from the image decoding/reconstruction process. We evaluate the performance of the proposed approach with numerical simulations, phantom experiments, and in vivo experiments. We demonstrate that the optimized experiments substantially reduce data acquisition time and/or improve parameter estimation. For example, the optimized experiments achieve about a factor of two improvement in the accuracy of $T_2$ maps, while keeping similar or slightly better accuracy of $T_1$ maps. Finally, as a remarkable observation, we find that the sequence of optimized acquisition parameters appears to be highly structured rather than randomly/pseudo-randomly varying as is prescribed in the conventional MR fingerprinting experiments.

Crowd Counting Through Walls Using WiFi

Abstract: Counting the number of people inside a building, from outside and without entering the building, is crucial for many applications. In this paper, we are interested in counting the total number of people walking inside a building (or in general behind walls), using readily-deployable WiFi transceivers that are installed outside the building, and only based on WiFi RSSI measurements. The key observation of the paper is that the inter-event times, corresponding to the dip events of the received signal, are fairly robust to the attenuation through walls (for instance as compared to the exact dip values). We then propose a methodology that can extract the total number of people from the inter-event times. More specifically, we first show how to characterize the wireless received power measurements as a superposition of renewal-type processes. By borrowing theories from the renewal-process literature, we then show how the probability mass function of the inter-event times carries vital information on the number of people. We validate our framework with 44 experiments in five different areas on our campus (3 classrooms, a conference room, and a hallway), using only one WiFi transmitter and receiver installed outside of the building, and for up to and including 20 people. Our experiments further include areas with different wall materials, such as concrete, plaster, and wood, to validate the robustness of the proposed approach. Overall, our results show that our approach can estimate the total number of people behind the walls with a high accuracy while minimizing the need for prior calibrations.

Adaptive Nonlinear RF Cancellation for Improved Isolation in Simultaneous Transmit-Receive Systems

Abstract: This paper proposes an active radio frequency (RF) cancellation solution to suppress the transmitter (TX) passband leakage signal in radio transceivers supporting simultaneous transmission and reception. The proposed technique is based on creating an opposite-phase baseband equivalent replica of the TX leakage signal in the transceiver digital front-end through adaptive nonlinear filtering of the known transmit data, to facilitate highly accurate cancellation under a nonlinear TX power amplifier (PA). The active RF cancellation is then accomplished by employing an auxiliary transmitter chain, to generate the actual RF cancellation signal, and combining it with the received signal at the receiver (RX) low noise amplifier (LNA) input. A closed-loop parameter learning approach, based on the decorrelation principle, is also developed to efficiently estimate the coefficients of the nonlinear cancellation filter in the presence of a nonlinear TX PA with memory, finite passive isolation, and a nonlinear RX LNA. The performance of the proposed cancellation technique is evaluated through comprehensive RF measurements adopting commercial LTE-Advanced transceiver hardware components. The results show that the proposed technique can provide an additional suppression of up to 54 dB for the TX passband leakage signal at the RX LNA input, even at considerably high transmit power levels and with wide transmission bandwidths. Such novel cancellation solution can therefore substantially improve the TX-RX isolation, hence reducing the requirements on passive isolation and RF component linearity, as well as increasing the efficiency and flexibility of the RF spectrum use in the emerging 5G radio networks.

Achievable Information Rates for Fiber Optics: Applications and Computations

Abstract: In this paper, achievable information rates (AIR) for fiber optical communications are discussed. It is shown that AIRs such as the mutual information and generalized mutual information are good design metrics for coded optical systems. The theoretical predictions of AIRs are compared to the performance of modern codes including low-parity density check (LDPC) and polar codes. Two different computation methods for these AIRs are also discussed: Monte-Carlo integration and Gauss-Hermite quadrature. Closed-form ready-to-use approximations for such computations are provided for arbitrary constellations and the multidimensional AWGN channel. The computation of AIRs in optical experiments and simulations is also discussed.

Exploiting WiFi Channel State Information for Residential Healthcare Informatics

Abstract: Detection and interpretation of human activities have emerged as a challenging healthcare problem in areas such as assisted living and remote monitoring. Besides traditional approaches that rely on wearable devices and camera systems, WiFi based technologies are evolving as a promising solution for indoor monitoring and activity recognition. This is, in part, due to the pervasive nature of WiFi in residential settings such as homes and care facilities, and unobtrusive nature of WiFi based sensing. Advanced signal processing techniques can accurately extract WiFi channel status information (CSI) using commercial off-the-shelf (COTS) devices or bespoke hardware. This includes phase variations, frequency shifts and signal levels. In this paper, we describe the healthcare application of Doppler shifts in the WiFi CSI, caused by human activities which take place in the signal coverage area. The technique is shown to recognize different types of human activities and behaviour and be very suitable for applications in healthcare. Three experimental case studies are presented to illustrate the capabilities of WiFi CSI Doppler sensing in assisted living and residential care environments. We also discuss the potential opportunities and practical challenges for real-world scenarios.

Coexistence between Communication and Radar Systems - A Survey

Abstract: Data traffic demand in cellular networks has been tremendously growing and has led to creating congested RF environment. Accordingly, innovative approaches for spectrum sharing have been proposed and implemented to accommodate several systems within the same frequency band. Spectrum sharing between radar and communication systems is one of the important research and development areas. In this paper, we present the fundamental spectrum sharing concepts and technologies, then we provide an updated and comprehensive survey of spectrum sharing techniques that have been developed to enable some of the wireless communication systems to coexist in the same band as radar systems.

WiSpeed: A Statistical Electromagnetic Approach for Device-Free Indoor Speed Estimation

Abstract: Due to the severe multipath effect, no satisfactory device-free methods have ever been found for indoor speed estimation problem, especially in non-line-of-sight scenarios, where the direct path between the source and observer is blocked. In this paper, we present WiSpeed, a universal low-complexity indoor speed estimation system leveraging radio signals, such as commercial WiFi, LTE, 5G, etc., which can work in both device-free and device-based situations. By exploiting the statistical theory of electromagnetic waves, we establish a link between the autocorrelation function of the physical layer channel state information and the speed of a moving object, which lays the foundation of WiSpeed. WiSpeed differs from the other schemes requiring strong line-of-sight conditions between the source and observer in that it embraces the rich-scattering environment typical for indoors to facilitate highly accurate speed estimation. Moreover, as a calibration-free system, WiSpeed saves the users' efforts from large-scale training and fine-tuning of system parameters. In addition, WiSpeed could extract the stride length as well as detect abnormal activities such as falling down, a major threat to seniors that leads to a large number of fatalities every year. Extensive experiments show that WiSpeed achieves a mean absolute percentage error of 4.85% for device-free human walking speed estimation and 4.62% for device-based speed estimation, and a detection rate of 95% without false alarms for fall detection.

Advanced Satellite-based Frequency Transfer at the 10^{-16} Level

Abstract: Advanced satellite-based frequency transfers by TWCP and IPPP have been performed between NICT and KRISS. We confirm that the disagreement between them is less than 1x10^{-16} at an averaging time of several days. Additionally, an intercontinental frequency ratio measurement of Sr and Yb optical lattice clocks was directly performed by TWCP. We achieved an uncertainty at the mid-10^{-16} level after a total measurement time of 12 hours. The frequency ratio was consistent with the recently reported values within the uncertainty.

Beam Alignment and Tracking for Autonomous Vehicular Communication using IEEE 802.11ad-based Radar

Abstract: Mobility scenarios involving short contact times pose a challenge for high bandwidth data transfer between autonomous vehicles and roadside base stations (BS). Millimeter wave bands are a viable solution as they offer enormous bandwidth in the 60GHz band with several Gbps data transfer rates. However, beamforming is used as a default mode in this band, which requires accurate and continuous alignment under relative motion. We propose a method in which an off-the-shelf IEEE 802.11ad WiFi router is configured to serve as the BS as well as a radar exploiting special structure of 802.11ad preamble. We embed the radar functionality within standards-compliant operations that do not modify the core structure of the frames beyond what is defined by the 802.11ad protocol. This not only reduces the beam training time, but also ensures scalability with increasing vehicular traffic because radar allows accurate ranging of up to 0.1m at distances up to 200m. We further analyze the ensuing cost-benefit trade-off between the time allotted to the proposed in-band radar and communication modes. Our results reveal 83% reduction on the overhead incurred during the beam training achieved for a specific simulated vehicular scenario over the classical 802.11ad operation.

Fast-SSC-Flip Decoding of Polar Codes

Abstract: Polar codes are widely considered as one of the most exciting recent discoveries in channel coding. For short to moderate block lengths, their error-correction performance under list decoding can outperform that of other modern error-correcting codes. However, high-speed list-based decoders with moderate complexity are challenging to implement. Successive-cancellation (SC)-flip decoding was shown to be capable of a competitive error-correction performance compared to that of list decoding at a fraction of the complexity, but suffers from a variable execution time and a higher worst-case latency. In this work, we show how to modify the state-of-the-art high-speed SC decoding algorithm to incorporate the SC-flip ideas. The algorithmic improvements are presented as well as average execution-time results tailored to a hardware implementation. The results show that the proposed fast-SSC-flip algorithm has a decoding speed close to an order of magnitude better than the previous works while retaining a comparable error-correction performance.

Massive MIMO 1-Bit DAC Transmission: A Low-Complexity Symbol Scaling Approach

Abstract: We study multi-user massive multiple-input single-output (MISO) systems and focus on downlink transmission, where the base station (BS) employs a large antenna array with low-cost 1-bit digital-to-analog converters (DACs). The direct combination of existing beamforming schemes with 1-bit DACs is shown to lead to an error floor at medium-to-high SNR regime, due to the coarse quantization of the DACs with limited precision. In this paper, based on the constructive interference we consider both a quantized linear beamforming scheme where we analytically obtain the optimal beamforming matrix, and a non-linear mapping scheme where we directly design the transmit signal vector. Due to the 1-bit quantization, the formulated optimization for the non-linear mapping scheme is shown to be non-convex. To solve this problem, the non-convex constraints of the 1-bit DACs are firstly relaxed, followed by an element-wise normalization to satisfy the 1-bit DAC transmission. We further propose a low-complexity symbol scaling scheme that consists of three stages, in which the quantized transmit signal on each antenna element is selected sequentially. Numerical results show that the proposed symbol scaling scheme achieves a comparable performance to the optimization-based non-linear mapping approach, while its corresponding complexity is negligible compared to that of the non-linear scheme.

DOA and Polarization Estimation for Non-Circular Signals in 3-D Millimeter Wave Polarized Massive MIMO Systems

Abstract: In this paper, an algorithm of multiple signal classification (MUSIC) is proposed for two-dimensional (2-D) direction of- arrival (DOA) and polarization estimation of non-circular signal in three-dimensional (3-D) millimeter wave polarized largescale/ massive multiple-input-multiple-output (MIMO) systems. The traditional MUSIC-based algorithms can estimate either the DOA and polarization for circular signal or the DOA for non-circular signal by using spectrum search. By contrast, in the proposed algorithm only the DOA estimation needs spectrum search, and the polarization estimation has a closedform expression. First, a novel dimension-reduced MUSIC (DRMUSIC) is proposed for DOA and polarization estimation of circular signal with low computational complexity. Next, based on the quaternion theory, a novel algorithm named quaternion non-circular MUSIC (QNC-MUSIC) is proposed for parameter estimation of non-circular signal with high estimation accuracy. Then based on the DOA estimation result using QNC-MUSIC, the polarization estimation of non-circular signal is acquired by using the closed-form expression of the polarization estimation in DR-MUSIC. In addition, the computational complexity analysis shows that compared with the conventional DOA and polarization estimation algorithms, our proposed QNC-MUSIC and DRMUSIC have much lower computational complexity, especially when the source number is large. The stochastic Cramer-Rao Bound (CRB) for the estimation of the 2-D DOA and polarization parameters of the non-circular signals is derived as well. Finally, numerical examples are provided to demonstrate that the proposed algorithms can improve the parameter estimation performance when the large-scale/massive MIMO systems are employed.

Orbital-angular-momentum mode-group multiplexed transmission over a graded-index ring-core fiber based on receive diversity and maximal ratio combining

Abstract: An orbital-angular-momentum (OAM) mode-group multiplexing (MGM) scheme based on a graded-index ring-core fiber (GIRCF) is proposed, in which a single-input two-output (or receive diversity) architecture is designed for each MG channel and simple digital signal processing (DSP) is utilized to adaptively resist the mode partition noise resulting from random intra-group mode crosstalk. There is no need of complex multiple-input multiple-output (MIMO) equalization in this scheme. Furthermore, the signal-to-noise ratio (SNR) of the received signals can be improved if a simple maximal ratio combining (MRC) technique is employed on the receiver side to efficiently take advantage of the diversity gain of receiver. Intensity-modulated direct-detection (IM-DD) systems transmitting three OAM mode groups with total 100-Gb/s discrete multi-tone (DMT) signals over a 1-km GIRCF and two OAM mode groups with total 40-Gb/s DMT signals over an 18-km GIRCF are experimentally demonstrated, respectively, to confirm the feasibility of our proposed OAM-MGM scheme.

Magnetless Circulators Based on Spatiotemporal Modulation of Bandstop Filters in a Delta Topology

Abstract: In this paper, we discuss the design rationale and guidelines to build magnet-less circulators based on spatio-temporal modulation of resonant junctions consisting of first-order bandstop filters connected in a delta topology. Without modulation, the junction does not allow transmission between its ports, however, when the natural oscillation frequencies of the constituent LC filters are modulated in time with a suitable phase pattern, a synthetic angular-momentum bias can be effectively imparted to the junction and a transmission window opens at one of the output ports, thus realizing a circulator. We develop a rigorous small-signal linear model and find analytical expressions for the harmonic S-parameters of the proposed circuit, which significantly facilitate the design process. We validate the theory with simulations and further discuss the large signal response, including power handling and non-linearity, and the noise performance. Finally, we present measured results with unprecedented performance in all metrics for a PCB prototype using a Rogers board and off-the-shelf discrete components.

Comparison of Low Complexity Coherent Receivers for UDWDM-PONs ($\lambda$-to-the-user)

Abstract: It is predicted that demand in optical access networks will reach multi-Gb/s per user. However, the limited performance of the direct detection receiver technology currently used in the optical network units at the customers' premises restricts data rates/user. Therefore, the concept of coherent-enabled access networks has attracted attention in recent years, as this technology offers high receiver sensitivity, inherent frequency selectivity, and linear field detection enabling the full compensation of linear channel impairments. However, the complexity of conventional (dual-polarisation digital) coherent receivers has so far prevented their introduction into access networks. Thus, to exploit the benefits of coherent technology in the ONUs, low complexity coherent receivers, suitable for implementation in ONUs, are needed. In this paper, the recently proposed low complexity coherent (i.e., polarisation-independent Alamouti-coding heterodyne) receiver is, for the first time, compared in terms of its minimum receiver sensitivity with five previously reported receiver designs, including a detailed discussion on their advantages and limitations. It is shown that the Alamouti-coding based receiver approach allows the lowest number of photons per bit (PPB) transmitted (with a lower bound of 15.5 PPB in an ideal system simulations) whilst requiring the lowest optical receiver hardware complexity. It also exhibits comparable complexity to the currently deployed direct-detection receivers, which typically require >1000 PPB. Finally, a comparison of experimentally achieved receiver sensitivities and transmission distances using these receivers is presented. The highest spectral efficiency and longest transmission distance at the highest bit rate reported using the Alamouti-coding receiver, which is also the only one, to date, to have been demonstrated in a full system bidirectional transmission.

Spatial Mode Diversity for Robust Free-Space Optical Communications

Abstract: Free-space communication links are severely affected by atmospheric turbulence, which causes degradation in the transmitted signal. One of the most common solutions to overcome this is to exploit diversity. In this approach, information is sent in parallel using two or more transmitters that are spatially separated, with each beam therefore experiencing different atmospheric turbulence, lowering the probability of a receive error. In this work we propose and experimentally demonstrate a generalization of diversity based on spatial modes of light, which we have termed $\textit{modal diversity}$. We remove the need for a physical separation of the transmitters by exploiting the fact that spatial modes of light experience different perturbations, even when travelling along the same path. For this proof-of-principle we selected modes from the Hermite-Gaussian and Laguerre-Gaussian basis sets and demonstrate an improvement in Bit Error Rate by up to 54\%. We outline that modal diversity enables physically compact and longer distance free space optical links without increasing the total transmit power.

Proximal Gradient Algorithms: Applications in Signal Processing

Abstract: Advances in numerical optimization have supported breakthroughs in several areas of signal processing. This paper focuses on the recent enhanced variants of the proximal gradient numerical optimization algorithm, which combine quasi-Newton methods with forward-adjoint oracles to tackle large-scale problems and reduce the computational burden of many applications. These proximal gradient algorithms are here described in an easy-to-understand way, illustrating how they are able to address a wide variety of problems arising in signal processing. A new high-level modeling language is presented which is used to demonstrate the versatility of the presented algorithms in a series of signal processing application examples such as sparse deconvolution, total variation denoising, audio de-clipping and others.

Analysis and Design of Cost-Effective, High-Throughput LDPC Decoders

Abstract: This paper introduces a new approach to cost-effective, high-throughput hardware designs for Low Density Parity Check (LDPC) decoders. The proposed approach, called Non-Surjective Finite Alphabet Iterative Decoders (NS-FAIDs), exploits the robustness of message-passing LDPC decoders to inaccuracies in the calculation of exchanged messages, and it is shown to provide a unified framework for several designs previously proposed in the literature. NS-FAIDs are optimized by density evolution for regular and irregular LDPC codes, and are shown to provide different trade-offs between hardware complexity and decoding performance. Two hardware architectures targeting high-throughput applications are also proposed, integrating both Min-Sum (MS) and NS-FAID decoding kernels. ASIC post synthesis implementation results on 65nm CMOS technology show that NS-FAIDs yield significant improvements in the throughput to area ratio, by up to 58.75% with respect to the MS decoder, with even better or only slightly degraded error correction performance.

The Gaussian Noise Model in the Presence of Inter-channel Stimulated Raman Scattering

Abstract: A Gaussian noise (GN) model is presented that properly accounts for an arbitrary frequency dependent signal power profile along the link. This enables the evaluation of the impact of inter-channel stimulated Raman scattering (ISRS) on the optical Kerr nonlinearity. Additionally, the frequency dependent fiber attenuation can be taken into account and transmission systems that use hybrid amplification schemes can be modeled, where distributed Raman amplification is partly applied over the optical spectrum. To include the latter two cases, a set of coupled ordinary differential equations must be numerically solved in order to obtain the signal power profile yielding a semi-analytical model. However for lumped amplification and negligible variation in fiber attenuation, a less complex and fully analytical model is presented which is referred to as the ISRS GN model. The derived model is exact to first-order for Gaussian modulated signals and extensively validated by numerical split-step simulations. A maximum deviation of $0.1$~dB in nonlinear interference power between simulations and the ISRS GN model is found. The model is applied to a transmission system that occupies an optical bandwidth of $10$~THz, representing the entire C+L band. At optimum launch power, changes of up to $2$~dB in nonlinear interference power due to ISRS are reported. Furthermore, comparable models published in the literature are benchmarked against the ISRS GN model.

Low Complexity Symbol-Level Design for Linear Precoding Systems

Abstract: The practical utilization of the symbol-level precoding in MIMO systems is challenging since the implementation of the sophisticated optimization algorithms must be done with reasonable computational resources In the real implementation of MIMO precoding systems, the processing time for each set of symbols is a crucial parameter, especially in the high-throughput mode In this work, a symbol-level optimization algorithm with reduced complexity is devised Performance of a symbol-level precoder is shown to improve in terms of the processing times per set of symbols

COOJA Network Simulator: Exploring the Infinite Possible Ways to Compute the Performance Metrics of IOT Based Smart Devices to Understand the Working of IOT Based Compression & Routing Protocols.

Abstract: This paper demonstrates the scheme regarding Internet of Things (IOT) which is well thought-out the next generation of Internet. IOT explicitly elaborates the assimilation of human beings and physical systems, as they can cooperate with each other so leading towards a sort of encroachment in networking by interconnecting things together while making use of wireless embedded systems, said to be the building blocks of IOT, that are capable to be given an IP address and thus making them part of the global internet. Several essential approaches that entail in IOT and supports this innovation are being argued in this paper. 6LoWPAN (IPV6 Low Power Personal Area Networks) is a protocol used to appropriately and efficiently use IPV6 addresses. Control messages of RPL routing protocol for low power devices are discussed to understand the working of RPL protocol. In the end Contiki OS based COOJA Network simulator is used to demonstrate the working of how these routing and compression protocol works in real time simulation.

Decoupled Heterogeneous Networks with Millimeter Wave Small Cells

Abstract: Deploying sub-6GHz network together with millimeter wave (mmWave) is a promising solution to simultaneously achieve sufficient coverage and high data rate. In the heterogeneous networks (HetNets), the traditional coupled access, i.e., the users are constrained to be associated with the same base station in both downlink and uplink, is no longer optimal, and the concept of downlink and uplink decoupling has recently been proposed. In this paper, we propose an analytical framework to investigate the traditional sub-6GHz HetNets integrating with mmWave small cells (SCells) with decoupled access, where both the uplink power control and mmWave interference are taken into account. Using the tools from stochastic geometry, the performance metrics of signal-to-interference-plus-noise ratio coverage probability, user-perceived rate coverage probability, and area sum rate are derived. The impact of the densification of different SCells on the network performance is also analyzed to give insights on the network design. Simulation results validate the accuracy of our analysis, and reveal that mmWave interference can not be neglected when the mmWave SCells are extremely dense and that different kinds of SCells have various effects on the network performance and thus need to be organized properly.

Maximum-Likelihood Power-Distortion Monitoring for GNSS Signal Authentication

Abstract: We propose an extension to the so-called PD detector. The PD detector jointly monitors received power and correlation profile distortion to detect the presence of GNSS carry-off-type spoofing, jamming, or multipath. We show that classification performance can be significantly improved by replacing the PD detector's symmetric-difference-based distortion measurement with one based on the post-fit residuals of the maximum-likelihood estimate of a single-signal correlation function model. We call the improved technique the PD-ML detector. In direct comparison with the PD detector, the PD-ML detector exhibits improved classification accuracy when tested against an extensive library of recorded field data. In particular, it is (1) significantly more accurate at distinguishing a spoofing attack from a jamming attack, (2) better at distinguishing multipath-afflicted data from interference-free data, and (3) less likely to issue a false alarm by classifying multipath as spoofing. The PD-ML detector achieves this improved performance at the expense of additional computational complexity.

Electric Vehicle Battery Swapping Station

Abstract: Providing adequate charging infrastructure plays a momentous role in rapid proliferation of Electric Vehicles (EVs). Easy access to such infrastructure would remove various obstacles regarding limited EV mobility range. A Battery Swapping Station (BSS) is an effective approach in supplying power to the EVs, while mitigating long waiting times in a Battery Charging Station (BCS). In contrast with the BCS, the BSS charges the batteries in advance and prepares them to be swapped in a considerably short time. Considering that these stations can serve as an intermediate entity between the EV owners and the power system, they can potentially provide unique benefits to the power system. This paper investigates the advantages of building the BSS from various perspectives. Accordingly, a model for the scheduling of battery charging from the station owner perspective is proposed. An illustrative example is provided to show how the proposed model would help BSS owners in managing their assets through scheduling battery charging time.