Showing papers in "Journal of Food Science in 2015"
TL;DR: The availability of nano-food packaging in the current market is reviewed, case studies on nanomaterial migration are reported, and the current status of safety regulations and management of nano, food packaging in leading countries across regions are presented.
Abstract: Recently, food packages produced with nanoparticles, "nano-food packaging," have become more available in the current market However, although the use of nanomaterials is increasing in food packaging applications, concern over toxicity affects consumer perceptions and acceptance Quite a number of commercialized forms of nano-food packaging are coated or composited product with inorganic materials, for example, nanosilver and nanoclay as representative examples Several studies have shown the possibility of nanomaterial migration from packaging or containers to foodstuff The debate is still ongoing among researchers about the extent of migration and whether it is negligible and safe Government agencies and stakeholders must hurry to determine use limitations and release conclusive legislation and regulations as soon as possible since nano-food packaging may have great impacts on human health This paper aims to review the availability of nano-food packaging in the current market, report case studies on nanomaterial migration, and present the current status of safety regulations and management of nano-food packaging in leading countries across regions This review should enable governments and researchers to develop further nanomaterial risk assessment studies
274 citations
TL;DR: The basic microwave properties relevant to heating uniformity and system design are described, and a historical overview on the development of microwave-assisted thermal sterilization (MATS) and pasteurization systems in research laboratories and used in food plants is provided.
Abstract: Microwave is an effective means to deliver energy to food through polymeric package materials, offering potential for developing short-time in-package sterilization and pasteurization processes. The complex physics related to microwave propagation and microwave heating require special attention to the design of process systems and development of thermal processes in compliance with regulatory requirements for food safety. This article describes the basic microwave properties relevant to heating uniformity and system design, and provides a historical overview on the development of microwave-assisted thermal sterilization (MATS) and pasteurization systems in research laboratories and used in food plants. It presents recent activities on the development of 915 MHz single-mode MATS technology, the procedures leading to regulatory acceptance, and sensory results of the processed products. The article discusses needs for further efforts to bridge remaining knowledge gaps and facilitate transfer of academic research to industrial implementation.
240 citations
TL;DR: The challenges associated with incorporating lipophilic bioactive components into foods, and potential nanoscale delivery systems that can be used to overcome these challenges are highlighted.
Abstract: There has been a surge of interest in the development of nanoscale systems for the encapsulation, protection, and delivery of lipophilic nutrients, vitamins, and nutraceuticals. This review article highlights the challenges associated with incorporating these lipophilic bioactive components into foods, and then discusses potential nanoscale delivery systems that can be used to overcome these challenges. In particular, the desirable characteristics required for any nanoscale delivery system are presented, as well as methods of fabricating them and of characterizing them. An overview of different delivery systems is given, such as microemulsions, nanoemulsions, emulsions, microgels, and biopolymer nanoparticles, and their potential applications are discussed. Nanoscale delivery systems have considerable potential within the food industry, but they must be carefully formulated to ensure that they are safe, economically viable, and effective.
226 citations
TL;DR: The existing data supporting the role for protein consumption, with an emphasis on whey protein, in the regulation of muscle mass and body composition in response to resistance training, caloric restriction, and aging are examined.
Abstract: Skeletal muscle is an integral body tissue playing key roles in strength, performance, physical function, and metabolic regulation. It is essential for athletes to ensure that they have optimal amounts of muscle mass to ensure peak performance in their given sport. However, the role of maintaining muscle mass during weight loss and as we age is an emerging concept, having implications in chronic disease prevention, functional capacity, and quality of life. Higher-protein diets have been shown to: (1) promote gains in muscle mass, especially when paired with resistance training; (2) spare muscle mass loss during caloric restriction; and (3) attenuate the natural loss of muscle mass that accompanies aging. Protein quality is important to the gain and maintenance of muscle mass. Protein quality is a function of protein digestibility, amino acid content, and the resulting amino acid availability to support metabolic function. Whey protein is one of the highest-quality proteins given its amino acid content (high essential, branched-chain, and leucine amino acid content) and rapid digestibility. Consumption of whey protein has a robust ability to stimulate muscle protein synthesis. In fact, whey protein has been found to stimulate muscle protein synthesis to a greater degree than other proteins such as casein and soy. This review examines the existing data supporting the role for protein consumption, with an emphasis on whey protein, in the regulation of muscle mass and body composition in response to resistance training, caloric restriction, and aging.
217 citations
TL;DR: Germinated buckwheat had better nutritional value and antioxidant activities than ungerminated Buckwheat, and it represented an excellent natural source of flavonoids and phenolic compounds, especially rutin and C-glycosylflavones, therefore, germinated buckle could be used as a promising functional food for health promotion.
Abstract: Germination is considered to be an effective process for improving the nutritional quality and functionality of cereals In this study, changes of nutritional ingredients, antinutritional components, chemical composition, and antioxidant activities of buckwheat seeds over 72 h of germination were investigated, and the reasons for these changes are discussed With the prolonged germination time, the contents of crude protein, reducing sugar, total phenolics, total flavonoids, and condensed tannins increased significantly, while the levels of crude fat, phytic acid, and the activity of trypsin inhibitor decreased Phenolic compounds, such as rutin, vitexin, isovitexin, orientin, isoorientin, chlorogenic acid, trans-3-hydroxycinnamic acid, and p-hydroxybenzoic acid increased significantly during the germination process, which may be due to the activation of phenylalanine ammonialyase The improvement of flavonoids led to significant enhancement of the antioxidant activities of germinated buckwheat Germinated buckwheat had better nutritional value and antioxidant activities than ungerminated buckwheat, and it represented an excellent natural source of flavonoids and phenolic compounds, especially rutin and C-glycosylflavones Therefore, germinated buckwheat could be used as a promising functional food for health promotion
126 citations
TL;DR: Prussian Blue assay was shown to be reproducible and repeatable and, therefore, may be used as an alternative to FC assay, and its advantages are its simplicity, low time consumption, lower usage of reagents, and higher selectivity.
Abstract: UNLABELLED Folin-Ciocalteu colorimetric assay (FC) is the most widely used assay to estimate the total phenolic content in foods, beverages, herbs and other plant extracts, but many chemical compounds may act as interfering agents, producing inaccurate estimations of the real concentration of phenolic compounds in the matrix. Based on this limitation, the objective of this study was to compare, quantitatively, the Folin-Ciocalteu and Prussian Blue (PB) assays in estimating the total phenolic content in purple grape juices (n = 20; Vitis labrusca L.) and teas (n = 25) from different botanical origins using 96-well microplates. PB assay presented a low limit of detection (PB = 0.27 mg/L; FC = 0.25 mg/L) and quantification (PB = 0.92 mg/L; FC = 0.82 mg/L), showing its suitability in screening the total phenolic content in grape juices and teas. FC and PB assays presented a high association (P < 0.0001) for teas (r = 0.887) and grape juices (r = 0.923). The advantages of PB over FC assay are its simplicity, low time consumption (15 min reaction as compared to 60 min reaction for the FC assay), lower usage of reagents (solutions are prepared in a mM base), and higher selectivity. Additionally, PB assay was proven to be reproducible and repeatable and, therefore, may be used as an alternative to FC assay. PRACTICAL APPLICATION Prussian Blue assay (PB) has been used as an alternative to Folin-Ciocalteu assay (FC) to estimate the total content of phenolic compounds in herbs and some natural products. In our study we showed that the advantages of PB assay over FC are its simplicity, low time consumption (15 min reaction as compared to 60 min reaction for the FC assay), lower usage of reagents (solutions are prepared in a mM base) and higher selectivity as compared to FC assay. Additionally, PB assay was proven to be reproducible and repeatable and, therefore, may be used as an alternative to FC assay.
124 citations
TL;DR: This article will review the development of MPCs and milk protein isolates including their composition, production, development, functional benefits, and ongoing research.
Abstract: Milk protein concentrates (MPCs) are complete dairy proteins (containing both caseins and whey proteins) that are available in protein concentrations ranging from 42% to 85%. As the protein content of MPCs increases, the lactose levels decrease. MPCs are produced by ultrafiltration or by blending different dairy ingredients. Although ultrafiltration is the preferred method for producing MPCs, they also can be produced by precipitating the proteins out of milk or by dry-blending the milk proteins with other milk components. MPCs are used for their nutritional and functional properties. For example, MPC is high in protein content and averages approximately 365 kcal/100 g. Higher-protein MPCs provide protein enhancement and a clean dairy flavor without adding significant amounts of lactose to food and beverage formulations. MPCs also contribute valuable minerals, such as calcium, magnesium, and phosphorus, to formulations, which may reduce the need for additional sources of these minerals. MPCs are multifunctional ingredients and provide benefits, such as water binding, gelling, foaming, emulsification, and heat stability. This article will review the development of MPCs and milk protein isolates including their composition, production, development, functional benefits, and ongoing research. The nutritional and functional attributes of MPCs are discussed in some detail in relation to their application as ingredients in major food categories.
118 citations
TL;DR: This review examines the global market for dairy ingredients by assessing the global demand for dairy products in relation to major dairy ingredient categories including whole and skim milk powders, whey protein concentrates, caseins, and caseinates.
Abstract: This review examines the global market for dairy ingredients by assessing the global demand for dairy products in relation to major dairy ingredient categories. Each broad category of dairy ingredients is reviewed including its definition, production and trade status, key applications, and future trends. Ingredient categories examined include whole and skim milk powders (WMPs, SMPs), whey protein concentrates (WPCs) and whey protein isolates (WPIs), milk protein concentrates (MPCs) and milk protein isolates (MPIs), caseins, and caseinates. Increases in world population and improvements in socioeconomic conditions will continue to drive the demand for dairy products and ingredients in the future. Dairy proteins are increasingly recognized to have nutritional and functional advantages compared to many protein sources, and the variety of ingredients with different protein concentrations, functionality, and flavor can meet the needs of the increasingly global dairy consumption. A thorough understanding of the variety of ingredients, how the ingredients are derived from milk, and how the demand from particular markets affects the supply situation are critical elements in understanding the current ingredient marketplace.
113 citations
TL;DR: The aim of this review is to provide concise information on the recent research trends on the enzymatic synthesis of SLs of commercial interest, such as medium- and long-chain triacylglycerols, human milk fat substitutes, cocoa butter equivalents, trans-free or low-trans plastic fats (such as margarines and shortenings), low-calorie fats/oils, health-beneficial fatty acid-rich fats/Oils.
Abstract: Structured lipids (SLs) are lipids that have been chemically or enzymatically modified from their natural biosynthetic form. Because SLs are made to possess desired nutritional, physicochemical, or textural properties for various applications in the food industry, many research activities have been aimed at their commercialization. The production of SLs by enzymatic procedures has a great potential in the future market because of the specificity of lipases and phospholipases used as the biocatalysts. The aim of this review is to provide concise information on the recent research trends on the enzymatic synthesis of SLs of commercial interest, such as medium- and long-chain triacylglycerols, human milk fat substitutes, cocoa butter equivalents, trans-free or low-trans plastic fats (such as margarines and shortenings), low-calorie fats/oils, health-beneficial fatty acid-rich fats/oils, mono- or diacylglycerols, and structurally modified phospholipids. This limited review covers 108 research articles published between 2010 and 2014 which were searched in Web of Science.
112 citations
TL;DR: EACs based on polysaccharides improved the physicochemical, microbiological, and sensory characteristics, increasing the shelf life of strawberries from 6 (control) to 15 d (coated fruits).
Abstract: Edible active coatings (EACs) based on pectin, pullulan, and chitosan incorporated with sodium benzoate and potassium sorbate were employed to improve the quality and shelf life of strawberries. Fruits were washed, disinfected, coated by dipping, packed, and stored at 4 °C for 15 d. Application of EACs reduced (P 0.05) throughout storage, and ascorbic acid content was maintained in pectin-EAC coated strawberries. Microbiological analyses showed that application of EACs reduced (P < 0.05) microbial growth (total aerobic counts, molds, and yeasts) on strawberries. Chitosan-EAC coated strawberries presented the best results in microbial growth assays. Sensory quality (color, flavor, texture, and acceptance) improved and decay rate decreased (P < 0.05) in pectin-EAC, pullulan-EAC, and chitosan-EAC coated strawberries. In conclusion, EACs based on polysaccharides improved the physicochemical, microbiological, and sensory characteristics, increasing the shelf life of strawberries from 6 (control) to 15 d (coated fruits).
102 citations
TL;DR: Hydlysates from Navy beans were the most potent inhibitors of DPP-IV with no statistical differences between precooked and raw, and IC50 values for ACE were not significantly different among all bean hydrolysates.
Abstract: The objective of this research was to determine the bioactive properties of the released peptides from commercially available precook common beans (Phaseolus vulgaris). Bioactive properties and peptide profiles were evaluated in protein hydrolysates of raw and commercially precooked common beans. Five varieties (Black, Pinto, Red, Navy, and Great Northern) were selected for protein extraction, protein and peptide molecular mass profiles, and peptide sequences. Potential bioactivities of hydrolysates, including antioxidant capacity and inhibition of α-amylase, α-glucosidase, dipeptidyl peptidase-IV (DPP-IV), and angiotensin converting enzyme I (ACE) were analyzed after digestion with pepsin/pancreatin. Hydrolysates from Navy beans were the most potent inhibitors of DPP-IV with no statistical differences between precooked and raw (IC50 = 0.093 and 0.095 mg protein/mL, respectively). α-Amylase inhibition was higher for raw Red, Navy and Great Northern beans (36%, 31%, 27% relative to acarbose (rel ac)/mg protein, respectively). α-Glucosidase inhibition among all bean hydrolysates did not show significant differences; however, inhibition values were above 40% rel ac/mg protein. IC50 values for ACE were not significantly different among all bean hydrolysates (range 0.20 to 0.34 mg protein/mL), except for Red bean that presented higher IC50 values. Peptide molecular mass profile ranged from 500 to 3000 Da. A total of 11 and 17 biologically active peptide sequences were identified in raw and precooked beans, respectively. Peptide sequences YAGGS and YAAGS from raw Great Northern and precooked Pinto showed similar amino acid sequences and same potential ACE inhibition activity. Processing did not affect the bioactive properties of released peptides from precooked beans. Commercially precooked beans could contribute to the intake of bioactive peptides and promote health.
TL;DR: The main functional transport properties that were examined in the reviewed studies are binding of molecules or ions, surface activity, aggregation, gelation, and interaction with other polymers.
Abstract: Milk proteins and milk protein aggregates are among the most important nanovehicles in food technology. Milk proteins have various functional properties that facilitate their ability to carry hydrophobic nutraceutical substances. The main functional transport properties that were examined in the reviewed studies are binding of molecules or ions, surface activity, aggregation, gelation, and interaction with other polymers. Hydrophobic binding has been investigated using caseins and isolated β-casein as well as whey proteins. Surface activity of caseins has been used to create emulsion-based carrier systems. Furthermore, caseins are able to self-assemble into micelles, which can incorporate molecules. Gelation and interaction with other polymers can be used to encapsulate molecules into protein networks. The release of transported substances mainly depends on pH and swelling behavior of the proteins. The targeted use of nanocarrier systems requires specific knowledge about the binding mechanisms between the proteins and the carried substances in a certain food matrix.
TL;DR: Overall, GA was most effective against cultures incubated at 37 °C for 24 h and at 25 °B for 48 h in various concentrations of nutrients and in vegetable wash waters, which indicated the potential of GA as emergent sources of biofilm control products.
Abstract: New strategies for biofilm inhibition are becoming highly necessary because of the concerns to synthetic additives. As gallic acid (GA) is a hydrolysated natural product of tannin in Chinese gall, this research studied the effects of GA on the growth and biofilm formation of bacteria (Escherichia coli [Gram-negative] and Streptococcus mutans [Gram-positive]) under different conditions, such as nutrient levels, temperatures (25 and 37 °C) and incubation times (24 and 48 h). The minimum antimicrobial concentration of GA against the two pathogenic organisms was determined as 8 mg/mL. GA significantly affected the growth curves of both test strains at 25 and 37 °C. The nutrient level, temperature, and treatment time influenced the inhibition activity of GA on both growth and biofim formation of tested pathogens. The inhibition effect of GA on biofilm could be due to other factors in addition to the antibacterial effect. Overall, GA was most effective against cultures incubated at 37 °C for 24 h and at 25 °C for 48 h in various concentrations of nutrients and in vegetable wash waters, which indicated the potential of GA as emergent sources of biofilm control products.
TL;DR: The present review summarizes some of the potential health and therapeutic benefits of lunasin reported hitherto and proposes its potential use as dietary supplement.
Abstract: Bioactive peptides are small protein fragments derived from enzymatic hydrolysis of food proteins, fermentation with proteolytic starter cultures, and gastrointestinal digestion. These peptides have positive impacts on a number of physiological functions in living beings. Lunasin, a soy-derived bioactive peptide, is one of the most promising among them. Lunasin encoded within 2S albumin (GM2S-1) gene, identified as a novel peptide extracted from soybean seed. It is composed of 43 amino acid residues with a molecular weight of 5.5 kDa. Extensive scientific studies have shown that lunasin possesses inherent antioxidative, anti-inflammatory, anticancerous properties and could also play a vital role in regulating of cholesterol biosynthesis in the body. Its high bioavailability and heat stable nature allow its potential use as dietary supplement. The present review summarizes some of the potential health and therapeutic benefits of lunasin reported hitherto.
TL;DR: The functionality variation between heated SPI samples is clearly related to the distribution of aggregates that differ in molecular size and surface activity, and the findings may encourage further research to develop functional SPI aggregates for various commercial applications.
Abstract: Suspensions (2% and 5%, w/v) of soy protein isolate (SPI) were heated at 80, 90, or 100 °C for different time periods to produce soluble aggregates of different molecular sizes to investigate the relationship between particle size and surface properties (emulsions and foams). Soluble aggregates generated in these model systems were characterized by gel permeation chromatography and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Heat treatment increased surface hydrophobicity, induced SPI aggregation via hydrophobic interaction and disulfide bonds, and formed soluble aggregates of different sizes. Heating of 5% SPI always promoted large-size aggregate (LA; >1000 kDa) formation irrespective of temperature, whereas the aggregate size distribution in 2% SPI was temperature dependent: the LA fraction progressively rose with temperature (80→90→100 °C), corresponding to the attenuation of medium-size aggregates (MA; 670 to 1000 kDa) initially abundant at 80 °C. Heated SPI with abundant LA (>50%) promoted foam stability. LA also exhibited excellent emulsifying activity and stabilized emulsions by promoting the formation of small oil droplets covered with a thick interfacial protein layer. However, despite a similar influence on emulsion stability, MA enhanced foaming capacity but were less capable of stabilizing emulsions than LA. The functionality variation between heated SPI samples is clearly related to the distribution of aggregates that differ in molecular size and surface activity. The findings may encourage further research to develop functional SPI aggregates for various commercial applications.
TL;DR: Compared with conventional deep fat frying, air frying produced products with a substantially lower fat content but with similar moisture contents and color characteristics, it required much longer processing times, and the slower evolution of temperature also resulted in lower rates of moisture loss and color development reactions.
Abstract: Air frying is being projected as an alternative to deep fat frying for producing snacks such as French fries. In air frying, the raw potato sections are essentially heated in hot air containing fine oil droplets, which dehydrates the potato and attempts to impart the characteristics of traditionally produced French fries, but with a substantially lower level of fat absorbed in the product. The aim of this research is to compare: (1) the process dynamics of air frying with conventional deep fat frying under otherwise similar operating conditions, and (2) the products formed by the 2 processes in terms of color, texture, microstructure, calorimetric properties, and sensory characteristics. Although, air frying produced products with a substantially lower fat content but with similar moisture contents and color characteristics, it required much longer processing times, typically 21 min in relation to 9 min in the case of deep fat frying. The slower evolution of temperature also resulted in lower rates of moisture loss and color development reactions. Differential scanning calorimetry (DSC) studies revealed that the extent of starch gelatinization was also lower in the case of air fried product. In addition, the 2 types of frying also resulted in products having significantly different texture and sensory characteristics.
TL;DR: The application of trehalose and alginate oligosaccharides to peeled frozen shrimp might maintain better quality and extend the commercialization of these refrigerated products.
Abstract: The cryoprotective effects of trehalose, alginate, and its oligosaccharides on peeled shrimp (Litopenaeus vannamei) during frozen storage was investigated by monitoring thawing loss, color, texture, myofibrillar protein content, Ca2+ -ATPase activity, and performing microscopic structural analysis. Data revealed significant (p < 0.05) inhibitory effects on thawing loss and textural variables (springiness and chewiness) in trehalose-, alginate oligosaccharides-, and sodium pyrophosphate-treated shrimp compared with the control and alginate-treated batches. L* values revealed that these saccharides had a positive effect on color stability during frozen storage. In addition, the results of chemical analyses showed that trehalose and alginate oligosaccharide treatments effectively maintained an increased myofibrillar protein content and Ca2+ -ATPase activity in frozen shrimp. In addition, hematoxylin & eosin staining and SDS-PAGE confirmed that these cryoprotective saccharides slowed the degradation of muscle proteins and the damage to muscle tissue structures. Overall, the application of trehalose and alginate oligosaccharides to peeled frozen shrimp might maintain better quality and extend the commercialization of these refrigerated products.
TL;DR: Results indicate that SERS coupled with the standing gold nanorod array substrates is a sensitive and reproducible method and can accurately detect pesticides in foods.
Abstract: There is an increasing interest in recent years in using novel nanomaterials as cost-effective, sensitive, and reproducible substrate for surface-enhanced Raman spectroscopy (SERS) applications. In this study, a novel SERS substrate was developed by assembling gold nanorods into standing arrays on a gold-coated silicon slide. The standing nanorod arrays were closely packed on the gold film, generating strong electromagnetic field and uniformly distributed SERS "hot-spots" on the array surface. The as-prepared SERS substrates were used to detect a widely used pesticide (that is, carbaryl) in acetonitrile-water solution, apple juice, and cabbage. Results demonstrate that the actual concentrations of carbaryl in apple juice and cabbage were linearly correlated with the concentrations predicted by the multiple linear regression models (R > 0.97). The detection limits of carbaryl in apple juice and cabbage were both 2.5 ppm, meeting the maximum residue limits set by US Environmental Protection Agency (EPA). SERS can detect as low as 0.1 ppm of carbaryl in acetonitrile-water solution. In addition, satisfactory recoveries were obtained for carbaryl in both apple juice and cabbage. These results indicate that SERS coupled with the standing gold nanorod array substrates is a sensitive and reproducible method and can accurately detect pesticides in foods.
TL;DR: The results suggest that the reduction in AFB1 production by cinnamaldehyde, eugenol, and citral at low concentration may be due to the down-regulations of the transcription level of aflatoxin biosynthetic genes.
Abstract: In order to reveal the inhibitory effects of cinnamaldehyde, citral, and eugenol on aflatoxin biosynthesis, the expression levels of 5 key aflatoxin biosynthetic genes were evaluated by real-time PCR. Aspergillus flavus growth and AFB1 production were completely inhibited by 0.80 mmol/L of cinnamaldehyde and 2.80 mmol/L of citral. However, at lower concentration, cinnamaldehyde (0.40 mmol/L), eugenol (0.80 mmol/L), and citral (0.56 mmol/L) significantly reduced AFB1 production with inhibition rate of 68.9%, 95.4%, and 41.8%, respectively, while no effect on fungal growth. Real-time PCR showed that the expressions of aflR, aflT, aflD, aflM, and aflP were down-regulated by cinnamaldehyde (0.40 mmol/L), eugenol (0.80 mmol/L), and citral (0.56 mmol/L). In the presence of cinnamaldehyde, AflM was highly down-regulated (average of 5963 folds), followed by aflP, aflR, aflD, and aflT with the average folds of 55, 18, 6.5, and 5.8, respectively. With 0.80 mmol/L of eugenol, aflP was highly down-regulated (average of 2061-folds), followed by aflM, aflR, aflD, and aflT with average of 138-, 15-, 5.2-, and 4.8-folds reduction, respectively. With 0.56 mmol/L of citral, aflT was completely inhibited, followed by aflM, aflP, aflR, and aflD with average of 257-, 29-, 3.5-, and 2.5-folds reduction, respectively. These results suggest that the reduction in AFB1 production by cinnamaldehyde, eugenol, and citral at low concentration may be due to the down-regulations of the transcription level of aflatoxin biosynthetic genes. Cinnamaldehyde and eugenol may be employed successfully as a good candidate in controlling of toxigenic fungi and subsequently contamination with aflatoxins in practice.
TL;DR: LAB community analyses showed that species in the genera Leuconostoc, Lactobacillus, and Weissella were key players in kimchi fermentation, but their successions during fermentation varied with the species, indicating that members of the key genera may have different acid tolerance or growth competitiveness depending on their respective species.
Abstract: This study aimed at evaluating raw materials as potential lactic acid bacteria (LAB) sources for kimchi fermentation and investigating LAB successions during fermentation. The bacterial abundances and communities of five different sets of raw materials were investigated using plate-counting and pyrosequencing. LAB were found to be highly abundant in all garlic samples, suggesting that garlic may be a major LAB source for kimchi fermentation. LAB were observed in three and two out of five ginger and leek samples, respectively, indicating that they can also be potential important LAB sources. LAB were identified in only one cabbage sample with low abundance, suggesting that cabbage may not be an important LAB source. Bacterial successions during fermentation in the five kimchi samples were investigated by community analysis using pyrosequencing. LAB communities in initial kimchi were similar to the combined LAB communities of individual raw materials, suggesting that kimchi LAB were derived from their raw materials. LAB community analyses showed that species in the genera Leuconostoc, Lactobacillus, and Weissella were key players in kimchi fermentation, but their successions during fermentation varied with the species, indicating that members of the key genera may have different acid tolerance or growth competitiveness depending on their respective species.
TL;DR: Results show for the first time that the small abundant natural compound, cuminaldehyde, can modulate α-SN fibrillation, suggesting that such natural active aldehyde could have potential therapeutic applications.
Abstract: Fibrillation of alpha-synuclein (α-SN) is a critical process in the pathophysiology of several neurodegenerative diseases, especially Parkinson's disease. Application of bioactive inhibitory compounds from herbal extracts is a potential therapeutic approach for this cytotoxic process. Here, we investigated the inhibitory effects of the Iranian Cuminum cyminum essential oil on the fibrillation of α-SN. Analysis of different fractions from the total extract identified cuminaldehyde as the active compound involved in the antifibrillation activity. In comparison with baicalein, a well-known inhibitor of α-SN fibrillation, cuminaldehyde showed the same activity in some aspects and a different activity on other parameters influencing α-SN fibrillation. The presence of spermidine, an α-SN fibrillation inducer, dominantly enforced the inhibitory effects of cuminaldehyde even more intensively than baicalein. Furthermore, the results from experiments using preformed fibrils and monobromobimane-labeled monomeric protein also suggest that cuminaldehyde prevents α-SN fibrillation even in the presence of seeds, having no disaggregating impact on the preformed fibrils. Structural studies showed that cuminaldehyde stalls protein assembly into β-structural fibrils, which might be achieved by the interaction with amine groups through its aldehyde group as a Schiff base reaction. This assumption was supported by FITC labeling efficiency assay. In addition, cytotoxicity assays on PC12 cells showed that cuminaldehyde is a nontoxic compound, treatment with cuminaldehyde throughout α-SN fibrillation showed no toxic effects on the cells. Taken together, these results show for the first time that the small abundant natural compound, cuminaldehyde, can modulate α-SN fibrillation. Hence, suggesting that such natural active aldehyde could have potential therapeutic applications.
TL;DR: The results showed that the initial pH of must was a vital factor influencing yeast growth and alcoholic fermentation, and the effect of low pH on wine products would be better understood and the tolerance mechanism ofLow pH of S. cerevisiae could be better explored in future.
Abstract: As the core microorganism of wine making, Saccharomyces cerevisiae encounter low pH stress at the beginning of fermentation. Effect of initial pH (4.50, 3.00, 2.75, 2.50) on growth and fermentation performance of 3 S. cerevisiae strains Freddo, BH8, No.7303, different tolerance at low pH, chosen from 12 strains, was studied. The values of yeast growth (OD600 , colony forming units, cell dry weight), fermentation efficiency (accumulated mass loss, change of total sugar concentration), and fermentation products (ethanol, glycerol, acetic acid, and l-succinic acid) at different pH stress were measured. The results showed that the initial pH of must was a vital factor influencing yeast growth and alcoholic fermentation. Among the 3 strains, strain Freddo and BH8 were more tolerant than No.7303, so they were affected slighter than the latter. Among the 4 pH values, all the 3 strains showed adaptation even at pH 2.50; pH 2.75 and 2.50 had more vital effect on yeast growth and fermentation products in contrast with pH 4.50 and 3.00. In general, low initial pH showed the properties of prolonging yeast lag phase, affecting accumulated mass loss, changing the consumption rate of total sugar, increasing final content of acetic acid and glycerol, and decreasing final content of ethanol and l- succinic acid, except some special cases. Based on this study, the effect of low pH on wine products would be better understood and the tolerance mechanism of low pH of S. cerevisiae could be better explored in future.
TL;DR: It is demonstrated that ultrasound of appropriate power density had great potentials in inhibiting decay, maintaining flavor and nutritional quality of cherry tomatoes, and in improving storage quality of Cherry tomato.
Abstract: UNLABELLED Mature-green cherry tomato fruits (Lycopersicon esculentum cv. Jinyu) were exposed to different power densities of ultrasound (66.64, 106.19, and 145.74 W/L) at 25 °C to study ultrasound non-thermal effects on the storage properties. Among the three levels of ultrasound irradiation, 106.19 W/L ultrasound was effective in reducing the spoilage microorganisms, delaying postharvest ripening through inhibiting ethylene production and respiration rates, and consequently maintaining fruit firmness, flavor, enzyme activities, antioxidants (total phenolics, total flavonoids), and the total antioxidant capacity of cherry tomatoes. The 66.64 W/L ultrasound had similar effects but to a lesser extent. Meanwhile, although 145.74 W/L ultrasound resulted in higher content of ascorbic acid (AA), it showed many negative effects on the storage quality of fruits. These results demonstrated that ultrasound of appropriate power density had great potentials in inhibiting decay, maintaining flavor and nutritional quality of cherry tomatoes. PRACTICAL APPLICATION Recently, ultrasound has been considered as a multifunctional pretreatment method for the preservation of postharvest fruits and vegetables. Although the preservation effects were slight because of the screening of the thermal effects, its non-thermal effects presented potentials in improving storage quality of cherry tomato. Further studies are needed to explore the combinations between ultrasound with heating as well as other postharvest preservation technologies to enhance the effects of ultrasound. These explorations would facilitate the large-scale application of ultrasound in the preservation of fresh fruits and vegetables.
TL;DR: The natural microbiota involved in the fermentation influence the quality and taste of fully postfermented teas such as China's Pu-erh tea and the ability of the isolates for converting the tea polyphenols to bioactive theabrownins in infusions of sun-dried green tea leaves in a submerged fermentation process was investigated.
Abstract: The natural microbiota involved in the fermentation influence the quality and taste of fully postfermented teas such as China's Pu-erh tea. Ten microbial isolates representing 6 species were recovered from a solid-state fermentation of a Pu-erh type tea. The isolates were Aspergillus tubingensis, Aspergillus marvanovae, Rhizomucor pusillus, Rhizomucor tauricus, Aspergillus fumigatus, and Candida mogii. With the exception of A. marvanovae and C. mogii, all these microorganisms have been previously reported in solid-state fermentations of native Pu-erh tea. The ability of the isolates for converting the tea polyphenols to bioactive theabrownins in infusions of sun-dried green tea leaves in a submerged fermentation process was subsequently investigated. All isolates except C. mogii TISTR 5938 effectively produced theabrownins in a 4-d fermentation in shake flasks at 40 °C, 250 rpm. A. tubingensis TISTR 3646, A. tubingensis TISTR 3647, A. marvanovae TISTR 3648, and A. fumigatus TISTR 3654 produced theabrownins at particularly high levels of 6.5, 12.4, 11.1, and 8.4 g/L, respectively.
TL;DR: The results suggest that the bacterial cellulose produced from HHP-mutant strain has an effective characterization, which can be used for a wide range of applications in food industry.
Abstract: In this study, comprehensive characterization and drying methods on properties of bacterial cellulose were analyzed. Bacterial cellulose was prepared by Gluconacetobacter hansenii CGMCC 3917, which was mutated by high hydrostatic pressure (HHP) treatment. Bacterial cellulose is mainly comprised of cellulose Iα with high crystallinity and purity. High-water holding and absorption capacity were examined by reticulated structure. Thermogravimetric analysis showed high thermal stability. High tensile strength and Young's modulus indicated its mechanical properties. The rheological analysis showed that bacterial cellulose had good consistency and viscosity. These results indicated that bacterial cellulose is a potential food additive and also could be used for a food packaging material. The high textural stability during freeze-thaw cycles makes bacterial cellulose an effective additive for frozen food products. In addition, the properties of bacterial cellulose can be affected by drying methods. Our results suggest that the bacterial cellulose produced from HHP-mutant strain has an effective characterization, which can be used for a wide range of applications in food industry.
TL;DR: A new model is proposed that addresses the function of proteins in foods based on the length scale(s) responsible for the function, and emphasis should be on a common means for structure formation to allow for comparisons across investigations.
Abstract: Proteins in foods serve dual roles as nutrients and structural building blocks. The concept of protein functionality has historically been restricted to nonnutritive functions--such as creating emulsions, foams, and gels--but this places sole emphasis on food quality considerations and potentially overlooks modifications that may also alter nutritional quality or allergenicity. A new model is proposed that addresses the function of proteins in foods based on the length scale(s) responsible for the function. Properties such as flavor binding, color, allergenicity, and digestibility are explained based on the structure of individual molecules; placing this functionality at the nano/molecular scale. At the next higher scale, applications in foods involving gelation, emulsification, and foam formation are based on how proteins form secondary structures that are seen at the nano and microlength scales, collectively called the mesoscale. The macroscale structure represents the arrangements of molecules and mesoscale structures in a food. Macroscale properties determine overall product appearance, stability, and texture. The historical approach of comparing among proteins based on forming and stabilizing specific mesoscale structures remains valid but emphasis should be on a common means for structure formation to allow for comparisons across investigations. For applications in food products, protein functionality should start with identification of functional needs across scales. Those needs are then evaluated relative to how processing and other ingredients could alter desired molecular scale properties, or proper formation of mesoscale structures. This allows for a comprehensive approach to achieving the desired function of proteins in foods.
TL;DR: The impact of precursors such as creatine, creatinine, and glucose on the formation of mutagenic/carcinogenic heterocyclic amines (HAs) were studied in patties of 9 different animal species equally heat treated with a double-plate contact grill.
Abstract: The impact of precursors such as creatine, creatinine, and glucose on the formation of mutagenic/carcinogenic heterocyclic amines (HAs) were studied in patties of 9 different animal species equally heat treated with a double-plate contact grill. All grilled patties of the various species (veal, beef, pork, lamb, horse, venison, turkey, chicken, ostrich) contained several HAs such as MeIQx (2-amino-3,8-dimethylimidazo[4,5-f] quinoxaline; 0.5-1.4 ng/g), 4,8-DiMeIQx (2-amino-3,4,8-trimethylimidazo[4,5-f] quinoxaline, 0 to 1.3 ng/g), PhIP (2-amino-1-methyl-6-phenylimidazo[4,5-b] pyridine, 1.2 to 10.5 ng/g), harman (1-methyl-9H-pyrido[3,4-b] indole; 0.5 to 3.2 ng/g), and/or norharman (9H-pyrido[3,4-b]indole 0.5 to 1.9 ng/g). Residual glycogen (glucose) content varied greatly from 0.07 to 1.46 wt% on a dry matter (DM) basis. Total creatin(in)e content in raw meat (1.36 to 2.0 wt% DM) hardly differed between species, except in turkey and ostrich (1.1 wt% DM). Chicken contained, compared to all other species, very low concentrations of glucose (0.07 wt% DM) and the highest levels of nonprotein nitrogen compounds. The free amino acids lysine (r = 0.77, P < 0.001), tyrosine, phenylalanine, proline, isoleucine, and aspartic acid (r = 0.47-0.56, P < 0.05) showed significant correlation to PhIP in chicken. Also a linear correlation was found to exist between PhIP (r = 0.87, P < 0.001) and MeIQx (r = 0.35, P < 0.01), and the molar ratio of creatin(in)e to glucose, respectively. Harman as co-mutagens was linearly correlated to the concentration of glucose (r = 0.65, P < 0.001). By contrast, norharman was not significant correlated to glucose levels.
TL;DR: The results obtained through this study support the use of UV-C treatment for better retention of quality, effective microbial inactivation and enhancement of health promoting compounds for the benefit of consumers.
Abstract: The effects of ultraviolet (UV-C) and medium heat (70 °C) treatments on the quality of fresh-cut Chokanan mango and Josephine pineapple were investigated. Quality attributes included physicochemical properties (pH, titratable acidity, and total soluble solids), ascorbic acid content (vitamin C), antioxidant activity, as well as microbial inactivation. Consumers’ acceptance was also investigated through sensory evaluation of the attributes (appearance, texture, aroma and taste). Furthermore, shelf-life study of samples stored at 4 ± 1 °C was conducted for 15 d. The fresh-cut fruits were exposed to UV-C for 0, 15, 30, and 60 min while heat treatments were carried out at 70 °C for 0, 5, 10 and 20 min. Both UV-C and medium heat treatments resulted in no significant changes to the physicochemical attributes of both fruits. The ascorbic acid content of UV-C treated fruits was unaffected; however, medium heat treatment resulted in deterioration of ascorbic acids in both fruits. The antioxidants were enhanced with UV-C treatment which could prove invaluable to consumers. Heat treatments on the other hand resulted in decreased antioxidant activities. Microbial count in both fruits was significantly reduced by both treatments. The shelf life of the fresh-cut fruits were also successfully extended to a maximum of 15 d following treatments. As for consumers’ acceptance, UV-C treated fruits were the most accepted as compared to their heat-treated counterparts. The results obtained through this study support the use of UV-C treatment for better retention of quality, effective microbial inactivation and enhancement of health promoting compounds for the benefit of consumers.
Practical Application
The results of this study suggest that UV-C and medium heat treatment are feasible treatments for shelf-life extension of fresh-cut fruits. UV-C treatment provides better retention of quality and has the capability to enhance antioxidant activities. Both treatments were successful in extension of shelf life to a maximum of 15 d. The ability of UV-C treatment to retain quality and enhance antioxidant activity in fruits could be well exploited for the benefit of consumers. Combination of UV-C and medium heat treatment with various packaging methods could be further exploited for the benefit of the fresh-cut industry.
TL;DR: The finding that low NO3(-) levels were observed in some organic vegetables in different cities may warrant further study to determine if true differences exist, due to production practices, seasonal differences, and the magnitudes of those differences.
Abstract: A national survey of the nitrate ( NO3(-)) and nitrite ( NO2(-)) concentrations in raw and highly consumed vegetables available at retail in the United States was conducted. A total of 194 samples of fresh broccoli, cabbage, celery, lettuce, and spinach categorized as conventional or organic by label were collected from 5 major cities in different geographic regions of the United States and analyzed to determine NO3(-) and NO2(-) concentrations. There were no differences in the mean NO2(-) values of conventional compared with organic vegetables taken from the 5 metropolitan areas. However, significant differences in mean pairwise comparisons between some conventional and organic vegetables for NO3(-) content were observed. The mean NO2(-) concentration of both conventional and organic vegetables ranged between 0.1 and 1.2 mg/kg of fresh weight (FW) with the exception of conventional spinach that contained 8.0 mg/kg FW. Mean NO3(-) contents of conventional broccoli, cabbage, celery, lettuce, and spinach were 394, 418, 1496, 851, and 2797 mg/kg FW, respectively, while their organic-labeled counterparts averaged 204, 552, 912, 844, and 1318 mg/kg FW. In most cases, organic vegetables were numerically lower in NO3(-) content than their conventional counterparts. Based on survey results, the finding that low NO3(-) levels were observed in some organic vegetables in different cities may warrant further study to determine if true differences exist, due to production practices, seasonal differences, and the magnitudes of those differences. Furthermore, the geographic differences in NO3(-) content of vegetables may flaw estimates of daily NO2(-) and NO3(-) exposure.
TL;DR: The results indicate that red beet cultivars can be utilized as a potential source of red and yellow natural colorants and petioles can also be used as a source rich in specific betalain compounds.
Abstract: The distribution of betalains in peel, flesh, and petioles of yellow and red beetroot cultivars has been investigated using an High-performance liquid chromatography (HPLC) system with electrospray mass spectrometry. Differences in the levels of betacyanins and betaxanthins between different colored cultivars were individually determined for 3 plant parts. The content of almost all analyzed compounds decreased in the following order: peel > flesh > petiole. Betanin/isobetanin pigments comprised a major portion of the relative peak area measured in red beetroot peel. Isobetanin relative peak areas were also high in leaf petioles (68.94% to 74.16%) of red colored cultivars. However, betacyanins were completely absent from the extracts of all analyzed parts of yellow beet. Glutamine-bx represented a very high relative peak area (59.54% to 64.18%) in flesh of red-colored cultivars analyzed in the study. Our results indicate that red beet cultivars can be utilized as a potential source of red and yellow natural colorants. However, differences in pigment composition among different beetroot parts must be considered and in order to maximize the pigment yields petioles can also be used as a source rich in specific betalain compounds.