Showing papers in "Journal of Industrial Microbiology & Biotechnology in 2005"

A bacterial view of the periodic table: genes and proteins for toxic inorganic ions

Abstract: Essentially all bacteria have genes for toxic metal ion resistances and these include those for Ag+, AsO2-, AsO4(3-), Cd2+ Co2+, CrO4(2-), Cu2+, Hg2+, Ni2+, Pb2+, TeO3(2-), Tl+ and Zn2+. The largest group of resistance systems functions by energy-dependent efflux of toxic ions. Fewer involve enzymatic transformations (oxidation, reduction, methylation, and demethylation) or metal-binding proteins (for example, metallothionein SmtA, chaperone CopZ and periplasmic silver binding protein SilE). Some of the efflux resistance systems are ATPases and others are chemiosmotic ion/proton exchangers. For example, Cd2+-efflux pumps of bacteria are either inner membrane P-type ATPases or three polypeptide RND chemiosmotic complexes consisting of an inner membrane pump, a periplasmic-bridging protein and an outer membrane channel. In addition to the best studied three-polypeptide chemiosmotic system, Czc (Cd2+, Zn2+, and Co2), others are known that efflux Ag+, Cu+, Ni2+, and Zn2+. Resistance to inorganic mercury, Hg2+ (and to organomercurials, such as CH3Hg+ and phenylmercury) involve a series of metal-binding and membrane transport proteins as well as the enzymes mercuric reductase and organomercurial lyase, which overall convert more toxic to less toxic forms. Arsenic resistance and metabolizing systems occur in three patterns, the widely-found ars operon that is present in most bacterial genomes and many plasmids, the more recently recognized arr genes for the periplasmic arsenate reductase that functions in anaerobic respiration as a terminal electron acceptor, and the aso genes for the periplasmic arsenite oxidase that functions as an initial electron donor in aerobic resistance to arsenite.

Phytoremediation of toxic trace elements in soil and water

Abstract: Toxic heavy metals and metalloids, such as cadmium, lead, mercury, arsenic, and selenium, are constantly released into the environment. There is an urgent need to develop low-cost, effective, and sustainable methods for their removal or detoxification. Plant-based approaches, such as phytoremediation, are relatively inexpensive since they are performed in situ and are solar-driven. In this review, we discuss specific advances in plant-based approaches for the remediation of contaminated water and soil. Dilute concentrations of trace element contaminants can be removed from large volumes of wastewater by constructed wetlands. We discuss the potential of constructed wetlands for use in remediating agricultural drainage water and industrial effluent, as well as concerns over their potential ecotoxicity. In upland ecosystems, plants may be used to accumulate metals/metalloids in their harvestable biomass (phytoextraction). Plants can also convert and release certain metals/metalloids in a volatile form (phytovolatilization). We discuss how genetic engineering has been used to develop plants with enhanced efficiencies for phytoextraction and phytovolatilization. For example, metal-hyperaccumulating plants and microbes with unique abilities to tolerate, accumulate, and detoxify metals and metalloids represent an important reservoir of unique genes that could be transferred to fast-growing plant species for enhanced phytoremediation. There is also a need to develop new strategies to improve the acceptability of using genetically engineered plants for phytoremediation.

Microbial metabolomics: replacing trial-and-error by the unbiased selection and ranking of targets.

Abstract: Microbial production strains are currently improved using a combination of random and targeted approaches. In the case of a targeted approach, potential bottlenecks, feed-back inhibition, and side-routes are removed, and other processes of interest are targeted by overexpressing or knocking-out the gene(s) of interest. To date, the selection of these targets has been based at its best on expert knowledge, but to a large extent also on 'educated guesses' and 'gut feeling'. Therefore, time and thus money is wasted on targets that later prove to be irrelevant or only result in a very minor improvement. Moreover, in current approaches, biological processes that are not known to be involved in the formation of a specific product are overlooked and it is impossible to rank the relative importance of the different targets postulated. Metabolomics, a technology that involves the non-targeted, holistic analysis of the changes in the complete set of metabolites in the cell in response to environmental or cellular changes, in combination with multivariate data analysis (MVDA) tools like principal component discriminant analysis and partial least squares, allow the replacement of current empirical approaches by a scientific approach towards the selection and ranking of targets. In this review, we describe the technological challenges in setting up the novel metabolomics technology and the principle of MVDA algorithms in analyzing biomolecular data sets. In addition to strain improvement, the combined metabolomics and MVDA approach can also be applied to growth medium optimization, predicting the effect of quality differences of different batches of complex media on productivity, the identification of bioactives in complex mixtures, the characterization of mutant strains, the exploration of the production potential of strains, the assignment of functions to orphan genes, the identification of metabolite-dependent regulatory interactions, and many more microbiological issues. © Society for Industrial Microbiology 2005.

Evaluation of Streptomyces sp. strain g10 for suppression of Fusarium wilt and rhizosphere colonization in pot-grown banana plantlets

Abstract: Streptomyces sp. strain g10 exhibited strong antagonism towards Fusarium oxysporum f.sp. cubense (Foc) races 1, 2 and 4 in plate assays by producing extracellular antifungal metabolites. Treating the planting hole and roots of 4-week-old tissue-culture-derived 'Novaria' banana plantlets with strain g10 suspension (10(8) cfu/ml), significantly (P < 0.05) reduced wilt severity when the plantlets were inoculated with 10(4) spores/ml Foc race 4. The final disease severity index for leaf symptom (LSI) and rhizome discoloration (RDI) was reduced about 47 and 53%, respectively, in strain g10-treated plantlets compared to untreated plantlets. Reduction in disease incidence was not significant (P < 0.05) when plantlets were inoculated with a higher concentration (10(6) spores/ml) of Foc race 4. Rhizosphere population of strain g10 showed significant (P = 0.05) increase of more than 2-fold at the end of the 3rd week compared to the 2nd week after soil amendment with the antagonist. Although the level dropped, the rhizosphere population at the end of the 6th week was still nearly 2-fold higher than the level detected after 2 weeks. In contrast, the root-free population declined significantly (P = 0.05), nearly 4-fold after 6 weeks when compared to the level detected after 2 weeks. Neither growth-inhibiting nor growth-stimulating effects were observed in plantlets grown in strain g10-amended soil.

Strategies for the engineered phytoremediation of toxic element pollution: mercury and arsenic.

Abstract: Plants have many natural properties that make them ideally suited to clean up polluted soil, water, and air, in a process called phytoremediation. We are in the early stages of testing genetic engineering-based phytoremediation strategies for elemental pollutants like mercury and arsenic using the model plant Arabidopsis. The long-term goal is to develop and test vigorous, field-adapted plant species that can prevent elemental pollutants from entering the food-chain by extracting them to aboveground tissues, where they can be managed. To achieve this goal for arsenic and mercury, and pave the way for the remediation of other challenging elemental pollutants like lead or radionucleides, research and development on native hyperaccumulators and engineered model plants needs to proceed in at least eight focus areas: (1) Plant tolerance to toxic elementals is essential if plant roots are to penetrate and extract pollutants efficiently from heterogeneous contaminated soils. Only the roots of mercury- and arsenic-tolerant plants efficiently contact substrates heavily contaminated with these elements. (2) Plants alter their rhizosphere by secreting various enzymes and small molecules, and by adjusting pH in order to enhance extraction of both essential nutrients and toxic elements. Acidification favors greater mobility and uptake of mercury and arsenic. (3) Short distance transport systems for nutrients in roots and root hairs requires numerous endogenous transporters. It is likely that root plasma membrane transporters for iron, copper, zinc, and phosphate take up ionic mercuric ions and arsenate. (4) The electrochemical state and chemical speciation of elemental pollutants can enhance their mobility from roots up to shoots. Initial data suggest that elemental and ionic mercury and the oxyanion arsenate will be the most mobile species of these two toxic elements. (5) The long-distance transport of nutrients requires efficient xylem loading in roots, movement through the xylem up to leaves, and efficient xylem unloading aboveground. These systems can be enhanced for the movement of arsenic and mercury. (6) Aboveground control over the electrochemical state and chemical speciation of elemental pollutants will maximize their storage in leaves, stems, and vascular tissues. Our research suggests ionic Hg(II) and arsenite will be the best chemical species to trap aboveground. (7) Chemical sinks can increase the storage capacity for essential nutrients like iron, zinc, copper, sulfate, and phosphate. Organic acids and thiol-rich chelators are among the important chemical sinks that could trap maximal levels of mercury and arsenic aboveground. (8) Physical sinks such as subcellular vacuoles, epidermal trichome cells, and dead vascular elements have shown the evolutionary capacity to store large quantities of a few toxic pollutants aboveground in various native hyperaccumulators. Specific plant transporters may already recognize gluthione conjugates of Hg(II) or arsenite and pump them into vacuole.

New developments in the understanding of the cation diffusion facilitator family

Abstract: Cation diffusion facilitator (CDF) proteins are a phylogenetically ubiquitous family of intermembrane transporters generally believed to play a role in the homeostasis of a wide range divalent metal cations. CDFs are found in a host of membranes, including the bacterial cell membrane, the vacuolar membrane of both plants and yeast, and the golgi apparatus of animals. As such, they are potentially useful in the engineering of hyperaccumulative phytoremediation systems. While not yet sufficient for reliable biotechnological manipulation, characterization of this family is proceeding briskly. Experimental data suggests that CDFs are generally homodimers that use proton antiport to drive substrate translocation across a membrane. This translocation of both substrate and protons is likely mediated by a combination of histidines, aspartates, and glutamates. Functional data has suggested that CDFs are not limited to metal homeostasis roles, as some appear to be determinants in the operation of high-volume metal resistance systems, and others may facilitate cation-donation as a means of signal transduction. This review seeks to give an overview of the data prompting these conclusions, while presenting additional data whose interpretation is still contentious.

White biotechnology for green chemistry: fermentative 2-oxocarboxylic acids as novel building blocks for subsequent chemical syntheses

Abstract: Functionalized compounds, which are difficult to produce by classical chemical synthesis, are of special interest as biotechnologically available targets. They represent useful building blocks for subsequent organic syntheses, wherein they can undergo stereoselective or regioselective reactions. “White Biotechnology” (as defined by the European Chemical Industry [ http://www.europabio.org/white_biotech.htm ], as part of a sustainable “Green Chemistry,”) supports new applications of chemicals produced via biotechnology. Environmental aspects of this interdisciplinary combination include: In this overview we describe biotechnologically produced pyruvic, 2-oxopentaric and 2-oxohexaric acids as promising new building blocks for synthetic chemistry. In the first part, the microbial formation of 2-oxocarboxylic acids (2-OCAs) in general, and optimization of the fermentation steps required to form pyruvic acid, 2-oxoglutaric acid, and 2-oxo-d-gluconic acid are described, highlighting the fundamental advantages in comparison to chemical syntheses. In the second part, a set of chemical formula schemes demonstrate that 2-OCAs are applicable as building blocks in the chemical synthesis of, e.g., hydrophilic triazines, spiro-connected heterocycles, benzotriazines, and pyranoic amino acids. Finally, some perspectives are discussed.

Preparative synthesis of drug metabolites using human cytochrome P450s 3A4, 2C9 and 1A2 with NADPH-P450 reductase expressed in Escherichia coli

Abstract: Three human cytochrome P450s, 3A4, 2C9 and 1A2, were each co-expressed with NADPH-P450 reductase in Escherichia coli and used in the preparative synthesis of drug metabolites. Low dissolved oxygen (DO) concentration (<1%) during expression was found to be critical for producing active P450s. Control of temperature, pH and glycerol supplementation in 10-L fermentations enhanced enzyme expression 31–86%. Additional improvements were obtained by altering media formulations, resulting in bicistronic expression levels of 890, 1,800 and 1,010 nmol/L for 3A4, 2C9 and 1A2, respectively. The P450 titers achieved in fermentors exceeded those in flask fermentations by 3- to 6-fold in this study and up to 10-fold when compared with previously reported literature [FEBS Lett (1996) 397:210–214, Arch Biochem Biophys (1996) 327:254–259, Biochem Pharmacol (1998) 55:1315–1325, Drug Metab Pharmacokinet (2003) 18:42–47, Nat Biotechnol (1997) 15:784–788; Metab Eng (2000) 2:115–125]. Intact cells and isolated membranes obtained from 10-L fermentations were used to establish an efficient bioconversion system for the generation of metabolites. To demonstrate the utility of this approach, known metabolites of the anabolic steroid testosterone, the anti-inflammatory agent diclofenac and the analgesic agent phenacetin, were generated using 3A4, 2C9 and 1A2, respectively. The reaction conditions were optimized for pH, temperature, DO concentration, use of co-solvent and glucose supplementation. Conversion yields of 29–93% were obtained from 1-L reactions, enabling isolation of 59 mg 6β-hydroxytestosterone, 110 mg 4′-hydroxydiclofenac and 88 mg acetaminophen.

Pseudomonas aeruginosa, Candida albicans, and device-related nosocomial infections: implications, trends, and potential approaches for control.

Abstract: For many years, device-associated infections and particularly device-associated nosocomial infections have been of considerable concern. Recently, this concern was heightened as a result of increased antibiotic resistance among the common causal agents of nosocomial infections, the appearance of new strains which are intrinsically resistant to the antibiotics of choice, and the emerging understanding of the role biofilms may play in device-associated infections and the development of increased antibiotic resistance. Pseudomonas aeruginosa and Candida albicans are consistently identified as some of the more important agents of nosocomial infections. In light of the recent information regarding device-associated nosocomial infections, understanding the nature of P. aeruginosa and C. albicans infections is increasingly important. These two microorganisms demonstrate: (1) an ability to form biofilms on the majority of devices employed currently, (2) increased resistance/tolerance to antibiotics when associated with biofilms, (3) documented infections noted for virtually all indwelling devices, (4) opportunistic pathogenicity, and (5) persistence in the hospital environment. To these five demonstrated characteristics, two additional areas of interest are emerging: (a) the as yet unclear relationship of these two microorganisms to those species of highly resistant Pseudomonas spp and Candida spp that are of increasing concern with device-related infections, and (b) the recent research showing the dynamic interaction of P. aeruginosa and C. albicans in patients with cystic fibrosis. An understanding of these two opportunistic pathogens in the context of their ecosystems/biofilms also has significant potential for the development of novel and effective approaches for the control and treatment of device-associated infections.

Enhanced photocatalytic inactivation of bacterial spores on surfaces in air.

Abstract: TiO2 photocatalysis with ultraviolet (UV-A) light has proven to be a highly effective process for complete inactivation of airborne microbes. However, the overall efficiency of the technology needs to be improved to make it more attractive as a defense against bio-terrorism. The present research investigates the enhancement in the rate of destruction of bacterial spores on metal (aluminum) and fabric (polyester) substrates with metal (silver)-doped titanium dioxide and compares it to conventional photocatalysis (TiO2 P25/+UV-A) and UV-A photolysis. Bacillus cereus bacterial spores were used as an index to demonstrate the enhanced disinfection efficiency. The results indicate complete inactivation of B. cereus spores with the enhanced photocatalyst. The enhanced spore destruction rate may be attributed to the highly oxidizing radicals generated by the doped TiO2.

Monocomponent endoglucanase treatment increases the reactivity of softwood sulphite dissolving pulp.

Abstract: Softwood dissolving pulp was treated with a commercial monocomponent fungal endocellulase. The reactivity of the pulp for the production of rayon and cellulose derivatives as determined with the Fock method increased drastically with relatively low amounts of enzyme, and the yield loss and decrease of viscosity were moderate. The mechanism behind the increased reactivity is discussed.

Risk mitigation of genetically modified bacteria and plants designed for bioremediation

Abstract: While the possible advantages of bioremediation and phytoremediation, by both recombinant microbes and plants, have been extensively reviewed, the biosafety concerns have been less extensively treated. This article reviews the possible risks associated with the use of recombinant bacteria and plants for bioremediation, with particular emphasis on ways in which molecular genetics could contribute to risk mitigation. For example, genetic techniques exist that permit the site-specific excision of unnecessary DNA, so that only the transgenes of interest remain. Other mechanisms exist whereby the recombinant plants or bacteria contain conditional suicide genes that may be activated under certain conditions. These methods act to prevent the spread and survival of the transgenic bacteria or plants in the environment, and to prevent horizontal gene flow to wild or cultivated relatives. Ways in which these genetic technologies may be applied to risk mitigation in bioremediation and phytoremediation are discussed.

Codon optimization of bacterial luciferase (lux) for expression in mammalian cells.

Abstract: Expression of the bacterial luciferase (lux) system in mammalian cells would culminate in a new generation of bioreporters for in vivo monitoring and diagnostics technology. Past efforts to express bacterial luciferase in mammalian cells have resulted in only modest gains due in part to low overall expression of the bacterial genes. To optimize expression, we have designed and synthesized codon-optimized versions of the luxA and luxB genes from Photorhabdus luminsecens. To evaluate these genes in vivo, stable HEK293 cell lines were created harboring wild type luxA and luxB (WTA/WTB), codon-optimized luxA and wild type luxB (COA/WTB), and codon-optimized versions of both luxA and luxB genes (COA/COB). Although mRNA levels within these clones remained approximately equal, LuxA protein levels increased significantly after codon optimization. On average, bioluminescence levels were increased by more than six-fold [5×105 vs 2.9×106 relative light units (RLU)/mg total protein] with the codon-optimized luxA and wild type luxB. Bioluminescence was further enhanced upon expression of both optimized genes (2.7×107 RLU/mg total protein). These results show promise toward the potential development of an autonomous light generating lux reporter system in mammalian cells

Light effects on cell development and secondary metabolism in Monascus.

Abstract: In nature, light is one of most crucial environmental signals for developmental and physiological processes in various organisms, including filamentous fungi. We have found that both red light and blue light affect development in Monascus, influencing the processes of mycelium and spore formation, and the production of secondary metabolites such as γ-aminobutyric acid, red pigments, monacolin K and citrinin. Additionally, we observed that the wavelength of light affects these developmental and physiological processes in different ways. These findings suggest that Monascus possesses a system for differential light response and regulation.

Production of red pigments by the insect pathogenic fungus Cordyceps unilateralis BCC 1869.

Abstract: Production of red pigments (naphthoquinones) by the insect pathogenic fungus Cordyceps unilateralis BCC 1869 was investigated in this study. Cultivation conditions, including temperature, intitial pH of medium, and aeration, were optimised to improve the yield of total naphthoquinones in shake-flask culture of C. unilateralis. The highest yield of total naphthoquinones (3 g L−1) was obtained from a 28-day culture grown in potato dextrose broth with an initial pH of 7.0, at 28°C with shaking-induced aeration at 200 rpm. An extraction process for isolation of the targeted naphthoquinone, 3,5,8-trihydroxy-6-methoxy-2-(5-oxohexa-1,3-dienyl)-1,4-naphthoquinone (3,5,8-TMON), from a culture of C. unilateralis, was also developed. The yield of 3,5,8-TMON obtained was about 1.2 g L−1 or 40% of total naphthoquinones. The stability of 3,5,8-TMON was very high, even upon exposure to strong sunlight (70,000 lx), high temperature up to 200°C, and acid and alkali solutions at concentrations of 0.1 M

Isolation by genetic and physiological characteristics of a fuel-ethanol fermentative Saccharomyces cerevisiae strain with potential for genetic manipulation.

Abstract: Fuel ethanol fermentation process is a complex environment with an intensive succession of yeast strains. The population stability depends on the use of a well-adapted strain that can fit to a particular industrial plant. This stability helps to keep high level of ethanol yield and it is absolutely required when intending to use recombinant strains. Yeast strains have been previously isolated from different distilleries in Northeast Brazil and clustered in genetic strains by PCR-fingerprinting. In this report we present the isolation and selection of a novel Saccharomyces cerevisiae strain by its high dominance in the yeast population. The new strain, JP1 strain, presented practically the same fermentative capacity and stress tolerance like the most used commercial strains, with advantages of being highly adapted to different industrial units in Northeast Brazil that used sugar cane juice as substrate. Moreover, it presented higher transformation efficiency that pointed out its potential for genetic manipulations. The importance of this strain selection programme for ethanol production is discussed.

A portable surface plasmon resonance sensor system for real-time monitoring of small to large analytes

Abstract: Many environmental applications exist for biosensors capable of providing real-time analyses. One pressing current need is monitoring for agents of chemical- and bio-terrorism. These applications require systems that can rapidly detect small organics including nerve agents, toxic proteins, viruses, spores and whole microbes. A second area of application is monitoring for environmental pollutants. Processing of grab samples through chemical laboratories requires significant time delays in the analyses, preventing the rapid mapping and cleanup of chemical spills. The current state of development of miniaturized, integrated surface plasmon resonance (SPR) sensor elements has allowed for the development of inexpensive, portable biosensor systems capable of the simultaneous analysis of multiple analytes. Most of the detection protocols make use of antibodies immobilized on the sensor surface. The Spreeta 2000 SPR biosensor elements manufactured by Texas Instruments provide three channels for each sensor element in the system. A temperature-controlled two-element system that monitors for six analytes is currently in use, and development of an eight element sensor system capable of monitoring up to 24 different analytes will be completed in the near future. Protein toxins can be directly detected and quantified in the low picomolar range. Elimination of false positives and increased sensitivity is provided by secondary antibodies with specificity for different target epitopes, and by sensor element redundancy. Inclusion of more than a single amplification step can push the sensitivity of toxic protein detection to femtomolar levels. The same types of direct detection and amplification protocols are used to monitor for viruses and whole bacteria or spores. Special protocols are required for the detection of small molecules. Either a competition type assay where the presence of analyte inhibits the binding of antibodies to surface-immobilized analyte, or a displacement assay, where antibodies bound to analyte on the sensor surface are displaced by free analyte, can be used. The small molecule detection assays vary in sensitivity from the low micromolar range to the high picomolar.

Purification and characterization of a serine alkaline protease from Bacillus clausii GMBAE 42

Abstract: An extracellular serine alkaline protease of Bacillus clausii GMBAE 42 was produced in protein-rich medium in shake-flask cultures for 3 days at pH 10.5 and 37°C. Highest alkaline protease activity was observed in the late stationary phase of cell cultivation. The enzyme was purified 16-fold from culture filtrate by DEAE-cellulose chromatography followed by (NH4)2SO4 precipitation, with a yield of 58%. SDS-PAGE analysis revealed the molecular weight of the enzyme to be 26.50 kDa. The optimum temperature for enzyme activity was 60°C; however, it is shifted to 70°C after addition of 5 mM Ca2+ ions. The enzyme was stable between 30 and 40°C for 2 h at pH 10.5; only 14% activity loss was observed at 50°C. The optimal pH of the enzyme was 11.3. The enzyme was also stable in the pH 9.0–12.2 range for 24 h at 30°C; however, activity losses of 38% and 76% were observed at pH values of 12.7 and 13.0, respectively. The activation energy of Hammarsten casein hydrolysis by the purified enzyme was 10.59 kcal mol−1 (44.30 kJ mol−1). The enzyme was stable in the presence of the 1% (w/v) Tween-20, Tween-40,Tween-60, Tween-80, and 0.2% (w/v) SDS for 1 h at 30°C and pH 10.5. Only 10% activity loss was observed with 1% sodium perborate under the same conditions. The enzyme was not inhibited by iodoacetate, ethylacetimidate, phenylglyoxal, iodoacetimidate, n-ethylmaleimidate, n-bromosuccinimide, diethylpyrocarbonate or n-ethyl-5-phenyl-iso-xazolium-3′-sulfonate. Its complete inhibition by phenylmethanesulfonylfluoride and relatively high k cat value for N-Suc-Ala-Ala-Pro-Phe-pNA hydrolysis indicates that the enzyme is a chymotrypsin-like serine protease. K m and k cat values were estimated at 0.655 μM N-Suc-Ala-Ala-Pro-Phe-pNA and 4.21×103 min−1, respectively.

Effect of carbon sources differing in oxidation state and transport route on succinate production in metabolically engineered Escherichia coli

Abstract: In mixed-acid fermentation, succinate synthesis requires one mole of phosphoenolpyruvate (PEP), one mole of CO2, and two moles of NADH for every mole of succinate to be formed. Different carbon sources with different properties were used to address these requirements. Sorbitol generates one more mole of NADH than glucose. Fermentation of sorbitol was shown in this study (and by others) to produce significantly more succinate than fermentation of glucose, due to increased NADH availability. Xylose fermentation conserves the intracellular PEP pool, since its transport does not require the phosphotransferase system normally used for glucose transport. The extra PEP can then be assimilated in the succinate pathway to improve production. In this study, fermentation of xylose did yield higher succinate production than glucose fermentation. Subsequent inactivation of the acetate and lactate pathways was performed to study metabolite redistribution and the effect on succinate production. With the acetate pathway inactivated, significant carbon flux shifted toward lactate rather than succinate. When both acetate and lactate pathways were inactivated, succinate yield ultimately increased with a concomitant increase in ethanol yield.

Biodegradation of toluene by the new fungal isolates Paecilomyces variotii and Exophiala oligosperma

Abstract: Two new fungal strains, namely Paecilomyces variotii and Exophiala oligosperma, were isolated on toluene as the sole carbon and energy source, mineralizing the substrate into carbon dioxide Fungal strains isolated so far on such a pollutant and completely degrading it are very scarce Both fungi degraded the pollutant over the pH range 39–69 and temperature range 23–40°C, but E oligosperma was barely active at the highest temperature of 40°C Fungal growth on alkylbenzenes at 40°C has not been reported before Since the activity of the strains gradually decreased at pH values below 40, the use of nitrate instead of ammonium was tested In the presence of toluene, nitrate was a suitable nitrogen source for the Exophiala strain, but not for the Paecilomyces strain Nitrate rather than ammonium allowed the maintenance of a more constant pH

Production and purification of a calcium-dependent protease from Bacillus cereus BG1.

Abstract: The production and purification of a calcium-dependent protease by Bacillus cereus BG1 were studied. The production of the protease was found to depend specifically on the calcium concentration in the culture medium. This suggests that this metal ion is essential for the induction of protease production and/or stabilisation of the enzyme after synthesis. The calcium requirement is highly specific since other metal ions (such as Mg(2+) and Ba(2+), which both activate the enzyme) are not able to induce protease production. The most appropriate medium for growth and protease production comprises (g L(-1)) starch 5, CaCl(2) 2, yeast extract 2, K(2)HPO(4) 0.2 and KH(2)PO(4) 0.2. The protease of BG1 strain was purified to homogeneity by ultrafiltration, heat treatment, gel filtration on Sephacryl S-200, ion exchange chromatography on DEAE-cellulose and, finally, a second gel filtration on Sephacryl S-200, with a 39-fold increase in specific activity and 23% recovery. The molecular weight was estimated to be 34 kDa on SDS-PAGE. The optimum temperature and pH of the purified enzyme were determined to be 60 degrees C and 8.0, respectively, in 100 mM Tris-HCl buffer + 2 mM CaCl(2).

Production of lactic acid and fungal biomass by Rhizopus fungi from food processing waste streams

Abstract: This study proposed a novel waste utilization bioprocess for production of lactic acid and fungal biomass from waste streams by fungal species of Rhizopus arrhizus 36017 and R. oryzae 2062. The lactic acid and fungal biomass were produced in a single-stage simultaneous saccharification and fermentation process using potato, corn, wheat and pineapple waste streams as production media. R. arrhizus 36017 gave a high lactic acid yield up to 0.94-0.97 g/g of starch or sugars associated with 4-5 g/l of fungal biomass produced, while 17-19 g/l fungal biomass with a lactic acid yield of 0.65-0.76 g/g was produced by the R. oryzae 2062 in 36-48 h fermentation. Supplementation of 2 g/l of ammonium sulfate, yeast extract and peptone stimulated an increase in 8-15% lactic acid yield and 10-20% fungal biomass.

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

Abstract: The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l−1. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l−1, at D=0.05–0.3 h−1, and from 60–70 g l−1, at D=0.05 and 0.1 h−1·30 g l−1 of 1,3-propanediol and the highest reported value of productivity, 10.3 g l−1 h−1, was achieved at D=0.30 h−1 and 60 g l−1 of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l−1 of feed glycerol and a dilution rate higher than 0.10 h−1; moreover, at D=0.30 h−1 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.

The Pseudomonas aeruginosa RhlA enzyme is involved in rhamnolipid and polyhydroxyalkanoate production

Abstract: Pseudomonas aeruginosa produces the biosurfactant rhamnolipid, which has several potential biotechnological applications. The synthesis of this surfactant is catalyzed by rhamnosyltransferase 1, composed of the proteins RhlA and RhlB. Here we report that RhlA plays a role not only in surfactant synthesis, but also in the production of polyhydroxyalkanoates, polymers that can be used for the synthesis of biodegradable plastics.

Removal of n -hexane by Fusarium solani with a gas-phase biofilter

Abstract: A gas-phase biofilter inoculated with the fungus Fusarium solani, isolated from a consortium grown on hexane vapors, was used to degrade this compound. The biofilter, packed with perlite and operated with an empty bed residence time of 60 s, was supplied with hexane concentrations between 0.5 g m−3 and 11 g m−3. Biofilter performance was evaluated over 100 days of operation. Several strategies for supplying the nutritive mineral medium were assayed to maintain favorable conditions for the fungal growth and activity. The Fusarium system was able to sustain an average elimination capacity of 90 g m−3reactor h−1 with a maximum of 130 g m−3reactor h−1 . The mass transfer limitations due to high biomass development in the biofilter were confirmed in batch experiments. Bacterial contamination was observed, but experiments in the biofilter and in batch reactors using selective inhibitors and controlled pH confirmed the predominant role of the fungus. Results indicate that fungal biofilters can be an effective alternative to conventional abatement technologies for treating hydrophobic compounds.

Screening, mutagenesis and protoplast fusion of Aspergillus niger for the enhancement of extracellular glucose oxidase production

Abstract: Various strains of Aspergillus niger were screened for extracellular glucose oxidase (GOD) activity. The most effective producer, strain FS-3 (15.9 U mL(-1)), was mutagenized using UV-irradiation or ethyl methane sulfonate. Of the 400 mutants obtained, 32 were found to be resistant to 2-deoxy D: -glucose, and 17 of these exhibited higher GOD activities (from 114.5 to 332.1%) than the original FS-3 strain. Following determination of antifungal resistance of the highest producing mutants, four mutants were selected and used in protoplast fusions in three different intraspecific crosses. All fusants showed higher activities (from 285.5 to 394.2%) than the original strain. Moreover, of the 30 fusants isolated, 19 showed higher GOD activity than their corresponding higher-producing parent strain.

Characterization of salt-tolerant glutaminase from Stenotrophomonas maltophilia NYW-81 and its application in Japanese soy sauce fermentation

Abstract: Glutaminase from Stenotrophomonas maltophilia NYW-81 was purified to homogeneity with a final specific activity of 325 U/mg. The molecular mass of the native enzyme was estimated to be 41 kDa by gel filtration. A subunit molecular mass of 36 kDa was measured with SDS-PAGE, thus indicating that the native enzyme is a monomer. The N-terminal amino acid sequence of the enzyme was determined to be KEAETQQKLANVVILATGGTIA. Besides L: -glutamine, which was hydrolyzed with the highest specific activity (100%), L: -asparagine (74%), D: -glutamine (75%), and D: -asparagine (67%) were also hydrolyzed. The pH and temperature optima were 9.0 and approximately 60 degrees C, respectively. The enzyme was most stable at pH 8.0 and was highly stable (relative activities from 60 to 80%) over a wide pH range (5.0-10.0). About 70 and 50% of enzyme activity was retained even after treatment at 60 and 70 degrees C, respectively, for 10 min. The enzyme showed high activity (86% of the original activity) in the presence of 16% NaCl. These results indicate that this enzyme has a higher salt tolerance and thermal stability than bacterial glutaminases that have been reported so far. In a model reaction of Japanese soy sauce fermentation, glutaminase from S. maltophilia exhibited high ability in the production of glutamic acid compared with glutaminases from Aspergillus oryzae, Escherichia coli, Pseudomonas citronellolis, and Micrococcus luteus, indicating that this enzyme is suitable for application in Japanese soy sauce fermentation.

Detoxification of the organophosphate nerve agent coumaphos using organophosphorus hydrolase immobilized on cellulose materials

Abstract: Neurotoxic organophosphates (OPs) are widely used as pesticides and for public health purposes, as well as being nerve gases. As a result of the widespread use of these compounds for agriculture, large volumes of wastewater are generated. Additionally, there are large stockpiles of the nerve gases soman, sarin and VX in the United States and elsewhere around the world. Organophosphorus hydrolase (OPH) is an enzyme that catalyzes the hydrolysis of OP nerve agents. To date, however, the use of this enzyme in detoxification processes has been rather limited due to the high cost of its purification and short catalytic half-life. This paper reports the development of a cost-effective method for the production and immobilization of OPH in a pilot application in an enzyme bioreactor column for detoxification of paraoxon and coumaphos in contaminated wastewaters. A fusion between OPH and a cellulose binding domain that binds selectively to cellulose was generated to allow one-step purification and immobilization of OPH on cheap and abundantly available cellulose immobilization matrices. When packed in a column bioreactor, the immobilized fusion enzyme was able to completely degrade coumaphos up to a concentration of 0.2 mM. However, stirring of OPH immobilized on cellulose materials resulted in complete OP degradation of 1.5 mM coumaphos. The bioreactor column degraded the compounds tested at high concentration, rapidly, and without loss of process productivity for about 2 months.

Isolation and identification of bacteria from spent nuclear fuel pools

Abstract: The aim of the present research was to isolate and identify bacteria from spent nuclear fuel pools of a Spanish nuclear power plant. Water samples were collected and inoculated onto different culture media to isolate the highest number of species. 16S rDNA fragments from colonies growing on solid media were amplified and analysed by denaturing gradient gel electrophoresis. Sequencing revealed the presence of 21 different bacteria belonging to several phylogenetic groups (α, β, and γ-Proteobacteria, Actinomycetales, Flavobacterium, and the Bacillus/Staphylococcus group). The isolation of these microorganisms in this particular environment (oligotrophic and radioactive) is highly interesting because of the possibility of their being used for the bioremediation of radionuclide-contaminated waters.

Biochemical characterisation of extracellular phytase (myo-inositol hexakisphosphate phosphohydrolase) from a hyper-producing strain of Aspergillus niger van Teighem

Abstract: Aspergillus niger van Teighem, isolated in our laboratory from samples of rotten wood logs, produced extracellular phytase having a high specific activity of 22,592 units (mg protein)-1 . The enzyme was purified to near homogeneity using ion-exchange and gel-filtration chromatography. The molecular properties of the purified enzyme suggested the native phytase to be oligomeric, with a molecular weight of 353 kDa, the monomer being 66 kDa. The purified enzyme exhibited maximum activity at pH 2.5 and 52-55 degrees C. The enzyme retained 97% activity after a 24-h incubation at 55 degrees C in the presence of 10 mM glycine, while 87% activity was retained when no thermoprotectant was added. Phytase activity was not affected by most metal ions, inhibitors and organic solvents. Non-ionic and cationic detergents (0.1-5%) stabilise the enzyme, while the anionic detergent (SDS), even at a 0.1% level, severely inhibited enzyme activity. The chaotropic agents guanidinium hydrochloride, urea, and potassium iodide (0.5-8 M), significantly affected phytase activity. The maximum hydrolysis rate (Vmax) and apparent Michaelis-Menten constant (Km) were 1,074 IU/mL and 606 microM, respectively, with a catalytic turnover number of 3x10(5) s-1 and catalytic efficiency of 3.69x10(8) M-1 s-1.