scispace - formally typeset
Journal ArticleDOI

A 1-D analysis of ejector performance

TLDR
In this paper, a 1D analysis for the prediction of ejector performance at critical-mode operation is carried out, where constant pressure mixing is assumed to occur inside the constant-area section of the ejector and the entrained flow at choking condition is analyzed.
Abstract
A 1-D analysis for the prediction of ejector performance at critical-mode operation is carried out in the present study. Constant-pressure mixing is assumed to occur inside the constant-area section of the ejector and the entrained flow at choking condition is analyzed. We also carried out an experiment using 11 ejectors and R141b as the working fluid to verify the analytical results. The test results are used to determine the coefficients, h p, h s, f p and f m defined in the 1-D model by matching the test data with the analytical results. It is shown that the1-D analysis using the empirical coefficients can accurately predict the performance of the ejectors. q 1999 Elsevier Science Ltd and IIR. All rights reserved.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Development of hybrid solar-assisted cooling/heating system

TL;DR: In this article, a solar-assisted ejector cooling/heating system (SACH) was developed to provide a stable capacity for space cooling and reduce the condensing temperature of the R22 heat pump.
Journal ArticleDOI

A theoretical study of a novel regenerative ejector refrigeration cycle

TL;DR: In this article, a novel regenerative ejector refrigeration cycle was described, which uses an auxiliary jet pump and a conventional regenerator to enhance the performance of the novel cycle with the refrigerant R141b.
Journal ArticleDOI

Nonlinear multivariable sliding mode control of a reversible PEM fuel cell integrated system

TL;DR: In this article, a reduced-order sliding mode observer (SMO) based nonlinear control is proposed to regulate a multivariable proton exchange membrane fuel cell (PEMFC) integrated system.
Journal ArticleDOI

Performance optimization of adiabatic compressed air energy storage with ejector technology

TL;DR: In this article, the performance of two adiabatic compressed air energy storage systems was evaluated and an ejector was used to improve the energy conversion efficiency of system 2#.
Journal ArticleDOI

Numerical investigation on the influence of mixing chamber length on steam ejector performance

TL;DR: In this article, the effects of the mixing chamber length on the steam ejector performance under different Mach numbers at the nozzle exit, constant area section length, and diffuser length are studied using three-dimensional (3D) numerical simulations.
References
More filters
Journal ArticleDOI

A theoretical and experimental study of a small-scale steam jet refrigerator

TL;DR: In this paper, a small-capacity steam jet refrigerator has been tested with boiler temperatures in the range 120-140°C and the experimental data were found to be within 85% of the theoretical values.
Journal ArticleDOI

A small capacity steam-ejector refrigerator: experimental investigation of a system using ejector with movable primary nozzle

TL;DR: In this article, an experimental study of a steam-ejector refrigerator using an ejector with a primary nozzle that could be moved axially within the mixing chamber section was performed.
Journal ArticleDOI

Variable geometry ejectors and their applications in ejector refrigeration systems

TL;DR: In this article, the effect of ejector geometries on performance was analyzed for a 5kW steam-jet refrigerator with variable-geometry ejectors, including flow rates, entrainment ratio and ejector geometry.
Related Papers (5)