scispace - formally typeset
Journal ArticleDOI

A 1-D analysis of ejector performance

TLDR
In this paper, a 1D analysis for the prediction of ejector performance at critical-mode operation is carried out, where constant pressure mixing is assumed to occur inside the constant-area section of the ejector and the entrained flow at choking condition is analyzed.
Abstract
A 1-D analysis for the prediction of ejector performance at critical-mode operation is carried out in the present study. Constant-pressure mixing is assumed to occur inside the constant-area section of the ejector and the entrained flow at choking condition is analyzed. We also carried out an experiment using 11 ejectors and R141b as the working fluid to verify the analytical results. The test results are used to determine the coefficients, h p, h s, f p and f m defined in the 1-D model by matching the test data with the analytical results. It is shown that the1-D analysis using the empirical coefficients can accurately predict the performance of the ejectors. q 1999 Elsevier Science Ltd and IIR. All rights reserved.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Parametric study on dynamic heat and mass transfer response in polymer electrolyte membrane fuel cell for automotive applications

TL;DR: In this article, the authors developed a system-level model to analyze dynamic behavior of fuel cell car applied with a variable pressure system consisting blower and back pressure control valve at cathode.
Journal ArticleDOI

Experimental study of a new ejector-absorption refrigeration cycle driven by multi-heat sources

TL;DR: In this paper, the authors proposed a new ejector-absorption refrigeration cycle driven by two heat sources at different temperature levels to realize the economic optimization in low-grade heat recovery application.
Journal ArticleDOI

Comparison of CFD and experimental performance results of a variable area ratio steam ejector

TL;DR: In this paper, experimental and computational fluid dynamics (CFD) results for a 5kW-rated capacity steam ejector, with a variable primary nozzle geometry, are presented and compared.
Journal ArticleDOI

Evaluation on environment-friendly refrigerants with similar normal boiling points in ejector refrigeration system

TL;DR: Based on the Hypothetical Throat Area (THA) theory and the Constant Pressure Mixing (CPM) theory, a thermodynamic model for ejector was set up by introducing the real properties of refrigerants as discussed by the authors.
References
More filters
Journal ArticleDOI

A theoretical and experimental study of a small-scale steam jet refrigerator

TL;DR: In this paper, a small-capacity steam jet refrigerator has been tested with boiler temperatures in the range 120-140°C and the experimental data were found to be within 85% of the theoretical values.
Journal ArticleDOI

A small capacity steam-ejector refrigerator: experimental investigation of a system using ejector with movable primary nozzle

TL;DR: In this article, an experimental study of a steam-ejector refrigerator using an ejector with a primary nozzle that could be moved axially within the mixing chamber section was performed.
Journal ArticleDOI

Variable geometry ejectors and their applications in ejector refrigeration systems

TL;DR: In this article, the effect of ejector geometries on performance was analyzed for a 5kW steam-jet refrigerator with variable-geometry ejectors, including flow rates, entrainment ratio and ejector geometry.
Related Papers (5)