scispace - formally typeset
Journal ArticleDOI

A New Dual-Band Microstrip Bandpass Filter Using Net-Type Resonators

Reads0
Chats0
TLDR
In this paper, a dual-band microstrip bandpass filter is developed using net-type resonators, which operate at two closely specified resonant frequencies, f1 and f2, and then applied to construct a dualband filter based on the filter design concept of adding extra coupled resonators.
Abstract
In this letter, a new dual-band microstrip bandpass filter is developed using net-type resonators. The net-type resonator is designed to simultaneously operate at two closely specified resonant frequencies, f1 and f2, and then applied to construct a dual-band filter based on the filter design concept of adding extra coupled resonators. The dual-band filter with the elliptic function response is designed, implemented and experimentally verified in this letter. The measured results of the developed filter are in a good agreement with the simulated results by full-wave electromagnetic simulator. In addition, the developed filter not only has an excellent mid-band rejection, but also provides a wide stopband suppression.

read more

Citations
More filters
Journal ArticleDOI

Novel Multi-Stub Loaded Resonators and Their Applications to Various Bandpass Filters

TL;DR: In this article, a new class of multi-stub loaded resonators with flexibly controlled resonance modes, which are suitable for both tunable and nontunable filter applications, are presented.
Journal ArticleDOI

Analytical Design of Microstrip Short-Circuit Terminated Stepped-Impedance Resonator Dual-Band Filters

TL;DR: In this paper, the structural parameters of the SIR are obtained analytically according to the two passband center frequencies and bandwidths of the filter, and the achievable specifications of the dual-band filter can be rapidly determined.
Journal ArticleDOI

Design of Balanced Dual-Band Bandpass Filters Using Asymmetrical Coupled Lines

TL;DR: In this article, balanced dual-band bandpass filters (BPFs) using asymmetrical coupled lines were proposed and tested at center frequencies of 2.4 and 3.57 GHz.
Journal ArticleDOI

Compact Dual-Band Filter Using Open/Short Stub Loaded Stepped Impedance Resonators (OSLSIRs/SSLSIRs)

TL;DR: In this article, a microstrip dual-band filter with high frequency selectivity and extended rejection band was proposed, which employs one pair of open stub loaded stepped impedance resonators (OSLSIRs) functioning at two frequencies of interest.
Journal ArticleDOI

Multi-Layered Dual-Band Bandpass Filter Using Stub-Loaded Stepped-Impedance and Uniform-Impedance Resonators

TL;DR: In this paper, a multi-layered dual-band bandpass filter using stub-loaded stepped-impedance and uniform-IMpedance resonators is proposed, which is designed to have dual-passband at 2.4, and 5.2 GHz for WLAN.
References
More filters
Journal ArticleDOI

Bandpass Filters Using Parallel Coupled Stripline Stepped Impedance Resonators

TL;DR: In this paper, approximate design formulas for bandpass filters using parallel coupled stripling stepped impedance resonators (SIR) are derived, taking into account the arbitrary coupling length as well as quarter-wavelength coupling.
Journal ArticleDOI

Geometrical structures and fundamental characteristics of microwave stepped-impedance resonators

TL;DR: In this article, the fundamental characteristics of the three types of SIRs, namely, resonance conditions, resonator length, spurious (higher order) responses, and equivalent circuits are summarized.
Journal ArticleDOI

Design of microstrip bandpass filters with a dual-passband response

TL;DR: In this paper, the authors presented a rigorous design of microstrip bandpass filters with a dual-passband response in parallel-coupled and vertical-stacked configurations, where the second resonant frequency can be tuned over a wide range by adjusting its structure parameters.
Journal ArticleDOI

Design of Dual- and Triple-Passband Filters Using Alternately Cascaded Multiband Resonators

TL;DR: In this paper, a novel method for designing multiband bandpass filters has been proposed, which adds some extra coupled resonator sections in a single-circuit filter to increase the degrees of freedom in extracting coupling coefficients of a multiband filter.
Journal ArticleDOI

Compact dual-band microstrip bandpass filter without external feeds

TL;DR: In this article, a dual-band microstrip bandpass filter is proposed and designed to operate at 2.4 and 5.2 GHz without needing any external impedance-matching block, and the modified halfwavelength stepped-impedance resonator with sinuous configuration is constructed to simultaneously excite the dual resonances at these two specified frequencies with miniaturized overall size.
Related Papers (5)