Additive manufacturing: Challenges, trends, and applications:
Reads0
Chats0
TLDR
Additive manufacturing is a recent trend in production processes owing to its many benefits as discussed by the authors, which can be defined as the process of producing parts through the deposition of material in a layer-by-lay process.Abstract:
Additive manufacturing is a recent trend in production processes owing to its many benefits. It can be defined as the process of producing parts through the deposition of material in a layer-by-lay...read more
Citations
More filters
Journal ArticleDOI
A review on the various processing parameters in FDM
TL;DR: A review of the major developments that have taken place in developing the various samples and parameter optimization for FDM can be found in this article, where the major constraint of FDM technique is its narrow range of industrial applications is limited to either demonstrational part or as a conceptual model rather than to be used as a fully functional component.
Journal ArticleDOI
Fused Deposition Modelling: Current Status, Methodology, Applications and Future Prospects
Alba Cano-Vicent,Murtaza M. Tambuwala,Sk. Sarif Hassan,Debmalya Barh,Alaa A. A. Aljabali,Martin Birkett,Arun Arjunan,Ángel Serrano-Aroca +7 more
TL;DR: In this paper, the accepted manuscript of an article published by Elsevier in Additive Manufacturing on 2/10/2021, available online: https://doi.org/10.1016/j.addma.2021.102378
Journal ArticleDOI
Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges
Aamir Shahzad,Ismail Lazoglu +1 more
TL;DR: In this article, the state-of-the-art manufacturing of various ceramics such as alumina, zirconia, and their composites through Direct Ink Writing (DIW) is described in detail.
Journal ArticleDOI
Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review.
Nestor Washington Solis Pinargote,Anton Smirnov,Nikita Peretyagin,Anton Seleznev,Pavel Peretyagin +4 more
TL;DR: The AM processes used for 3D printing of graphene-based materials are described in more detail; moreover, some studies in a wide range of applications related to these AM techniques are cited.
Journal ArticleDOI
3D printing in the construction industry - A systematic review of the thermal performance in buildings
TL;DR: In this article, the authors present a systematic literature review on the thermal efficiency of 3D printed buildings, with particular attention being given to the thermal energy efficiency of the building's envelope and the influence of the thermal insulation on its energy consumption.
References
More filters
Book
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
TL;DR: Gibson et al. as discussed by the authors presented a comprehensive overview of additive manufacturing technologies plus descriptions of support technologies like software systems and post-processing approaches, and provided systematic solutions for process selection and design for AM Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing.
Journal ArticleDOI
3D printing of polymer matrix composites: A review and prospective
TL;DR: In this paper, the authors give an overview on 3D printing techniques of polymer composite materials and the properties and performance of 3D printed composite parts as well as their potential applications in the fields of biomedical, electronics and aerospace engineering.
Journal ArticleDOI
Anisotropic material properties of fused deposition modeling ABS
TL;DR: In this article, the properties of FDM parts fabricated by the FDM 1650 were analyzed using a Design of Experiment (DOE) approach, such as raster orientation, air gap, bead width, color and model temperature.
BookDOI
Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing
TL;DR: A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly as mentioned in this paper, with a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Journal ArticleDOI
The status, challenges, and future of additive manufacturing in engineering
Wei Gao,Yunbo Zhang,Devarajan Ramanujan,Karthik Ramani,Yong Chen,Christopher B. Williams,Charlie C. L. Wang,Yung C. Shin,Song Zhang,Pablo D. Zavattieri +9 more
TL;DR: Future directions such as the "print-it-all" paradigm, that have the potential to re-imagine current research and spawn completely new avenues for exploration are pointed out.