scispace - formally typeset
Open AccessBook

Chemical fixation and solidification of hazardous wastes

Reads0
Chats0
About
The article was published on 1990-01-01 and is currently open access. It has received 661 citations till now. The article focuses on the topics: Inert waste & Fixation (surgical).

read more

Citations
More filters
Book ChapterDOI

A preliminary investigation of the removal of heavy metal species from aqueous media using crushed concrete fines

TL;DR: In this article, the removal of heavy metal nitrates (Pb2+, Ba2+, Zn2+, Ni2+, Cr3+ and Cu2+) from aqueous solution by the addition of crushed OPC concrete waste (in the particle size range 1-2 mm) is reported.

Ministério da educação e do desporto universidade federal do rio grande do sul

TL;DR: In this paper, the appropriateness of the roof support system used at Barro Branco Mine, considering the geomechanical conditions of roof for whole mine area, was investigated, and the immediate roof was surveyed along various sections of the mine and the information used to classify zones according to the Coal Mine Roof Ratings (CMRR) system proposed by the U.S. Bureau of Mines in 1994.
Journal ArticleDOI

Immobilization of Heavy Metals in Waste Phosphate Coating Sludge Using Kiln Dust as Portland Cement Substitute

TL;DR: In this paper, stabilization and solidification of the waste phosphate sludge (WPS) using Portland cement (PC) and cement kiln dust (CKD) was investigated, and it was concluded that relatively low levels of alkalies, CaO and SiO2 content of CKD negatively affected the setting and leaching characteristics.
Journal ArticleDOI

Application of Waste Resources for the Stabilization of Heavy Metals (Pb, Cu) in Firing Range Soils

TL;DR: In this paper, a heavy metal stabilization treatment using waste resource stabilizing agents was utilized on army firing range soil contaminated with Pb and Cu for a wet-curing duration of 28 days.
Journal ArticleDOI

Modelling heavy metal and anion effects on physical and mechanical properties of portland cement by means of factorial experiments.

TL;DR: The results from the experimental campaign showed that the investigated contaminants variously affected the hydration process of cement, and none of the selected contaminants was found to significantly influence ultimate strength.