Compact heat exchangers
Reads0
Chats0
TLDR
The third edition of the second edition as discussed by the authors was published in 1964 and contains basic test data for eleven new surface configurations, including some of the very compact ceramic matrices, in both the English and the Systeme International (SI) system of units.Abstract:
This third edition is an update of the second edition published in 1964. New data and more modern theoretical solutions for flow in the simple geometries are included, although this edition does not differ radically from the second edition. It contains basic test data for eleven new surface configurations, including some of the very compact ceramic matrices. Al dimensions are given in both the English and the Systeme International (SI) system of units.read more
Citations
More filters
Dissertation
Evaluation of a Stratified Multi-tank Thermal Storage for Solar Heating Applications
TL;DR: Thesis (Ph.D, Mechanical and Materials Engineering) -- Queen's University, 2009-06-24 00:13:01.142 as discussed by the authors, thesis was published in 2009.
Journal ArticleDOI
Zeolite Monoliths for Air Separation: Part 1: Manufacture and Characterization
TL;DR: A 2 mm square lattice channel monolith with a 0.98 mm wall thickness and an overall diameter of 20 mm has been prepared from 5A zeolite powder and Na-bentonite (as a binder) by the unit operations of paste preparation, extrusion, drying and firing.
Journal ArticleDOI
The Air-Side Thermal-Hydraulic Performance of Flat-Tube Heat Exchangers With Louvered, Wavy, and Plain Fins Under Dry and Wet Conditions
Young-Gil Park,Anthony M. Jacobi +1 more
TL;DR: In this article, the air-side thermal-hydraulic performance of flat-tube aluminum heat exchangers is studied experimentally for conditions typical to air-conditioning applications, for heat exchanger constructed with serpentine louvered, wavy, and plain fins.
Journal ArticleDOI
Experimental and numerical study on the flow characteristics in curved rectangular microchannels
TL;DR: In this article, the flow characteristics in curved rectangular microchannels with different aspect ratios and curvature ratios for Re numbers ranging from 80 to 876 are investigated, and the obtained experimental results are compared with simulated values based on classical Navier-Stokes equations and available correlation in the literature.
Journal ArticleDOI
Prandtl number effect on offset fin heat exchanger performance: predictive model for heat transfer and pressure drop
Sen Hu,Keith E. Herold +1 more
TL;DR: In this article, a surface contribution analysis of energy and momentum balances in a unit cell of the offset fin geometry is performed to predict heat transfer and pressure drop performance of liquid-cooled offset fin cold plates.