scispace - formally typeset
Open AccessJournal ArticleDOI

Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm

Reads0
Chats0
TLDR
Advanced materials and devices are reported that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales.
Abstract
Here, we report advanced materials and devices that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales. A cointegrated collection of such energy-harvesting elements with rectifiers and microbatteries provides an entire flexible system, capable of viable integration with the beating heart via medical sutures and operation with efficiencies of ∼2%. Additional experiments, computational models, and results in multilayer configurations capture the key behaviors, illuminate essential design aspects, and offer sufficient power outputs for operation of pacemakers, with or without battery assist.

read more

Citations
More filters
Journal ArticleDOI

A Flexible Piezoelectric Nanogenerator Based on Aligned P(VDF-TrFE) Nanofibers

TL;DR: The nanogenerator based on aligned P(VDF-TrFE) nanofibers exhibits good electric performance with a maximum output voltage as high as 12 V and peak-peak short circuit current about 150 nA, highlighting the potential application of P( VDF- TrFE) on self-powered and wearable devices.
Journal ArticleDOI

Optimization and performance comparison for galloping-based piezoelectric energy harvesters with alternating-current and direct-current interface circuits

TL;DR: In this paper, the authors compared the performance of a galloping-based piezoelectric energy harvester with the same vibrational source but different interfaces and found that the optimal electrical damping with different optimal load resistances for the systems with the AC and DC interfaces.
Journal ArticleDOI

Stretchable Piezoelectric Substrate Providing Pulsatile Mechanoelectric Cues for Cardiomyogenic Differentiation of Mesenchymal Stem Cells

TL;DR: A stretchable piezoelectric substrate (SPS) that can provide PMEC to human MSCs (hMSCs) for cardiomyogenic differentiation ex vivo showed promoted cardiac phenotype development and may be utilized to potentiate hMSC therapies for myocardial infarction and provide a tool for the study of stem cell biology.
Journal ArticleDOI

Directional Freezing Assisted 3D Printing to Solve a Flexible Battery Dilemma: Ultrahigh Energy/Power Density and Uncompromised Mechanical Compliance

TL;DR: In this paper , a directional freezing assisted 3D printing strategy is proposed to construct flexible, compressible, and ultrahigh energy/power density lithium-ion batteries (LIBs) for wearable and smart electronics.
References
More filters
Journal ArticleDOI

Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays

TL;DR: This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.
Journal ArticleDOI

Human-powered wearable computing

TL;DR: This paper explores the possibility of harnessing the energy expended during the user's everyday actions to generate power for his or her computer, thus eliminating the impediment of batteries.
Journal ArticleDOI

1.6 V Nanogenerator for Mechanical Energy Harvesting Using PZT Nanofibers

TL;DR: A piezoelectric nanogenerator based on PZT nanofibers, with a diameter and length of approximately 60 nm and 500 microm, was reported, aligned on interdigitated electrodes of platinum fine wires and packaged using a soft polymer on a silicon substrate.
Journal ArticleDOI

Flexible High-Output Nanogenerator Based on Lateral ZnO Nanowire Array

TL;DR: A simple and effective approach, named scalable sweeping-printing-method, for fabricating flexible high-output nanogenerator (HONG) that can effectively harvesting mechanical energy for driving a small commercial electronic component is reported.
Journal ArticleDOI

Piezoelectric BaTiO₃ thin film nanogenerator on plastic substrates.

TL;DR: The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.
Related Papers (5)