scispace - formally typeset
Open AccessJournal ArticleDOI

Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm

TLDR
Advanced materials and devices are reported that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales.
Abstract
Here, we report advanced materials and devices that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales. A cointegrated collection of such energy-harvesting elements with rectifiers and microbatteries provides an entire flexible system, capable of viable integration with the beating heart via medical sutures and operation with efficiencies of ∼2%. Additional experiments, computational models, and results in multilayer configurations capture the key behaviors, illuminate essential design aspects, and offer sufficient power outputs for operation of pacemakers, with or without battery assist.

read more

Citations
More filters
Journal ArticleDOI

Toward bioimplantable and biocompatible flexible energy harvesters using piezoelectric ceramic materials

TL;DR: A comprehensive overview of currently available research on bioimplantable energy harvesters, with a specific focus on their fabrication and issue of biocompatibility, is presented in this article.
Journal ArticleDOI

Measurement of Spurious Voltages in ZnO Piezoelectric Nanogenerators

TL;DR: In this paper, the authors have fabricated hydrothermally synthesized ZnO-based NGs following the procedures standardized in the published literature, and the voltage output of both the ZnOs and the reference NGs was measured given a 10-Hz cyclic vertical load.
Journal ArticleDOI

A utility piezoelectric energy harvester with low frequency and high-output voltage: Theoretical model, experimental verification and energy storage

TL;DR: In this paper, a utility piezoelectric energy harvester with low frequency and high output voltage is presented, and three theoretical models are presented, namely the static model, the quasi static model and the dynamic vibration model.
References
More filters
Journal ArticleDOI

Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays

TL;DR: This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.
Journal ArticleDOI

Human-powered wearable computing

TL;DR: This paper explores the possibility of harnessing the energy expended during the user's everyday actions to generate power for his or her computer, thus eliminating the impediment of batteries.
Journal ArticleDOI

1.6 V Nanogenerator for Mechanical Energy Harvesting Using PZT Nanofibers

TL;DR: A piezoelectric nanogenerator based on PZT nanofibers, with a diameter and length of approximately 60 nm and 500 microm, was reported, aligned on interdigitated electrodes of platinum fine wires and packaged using a soft polymer on a silicon substrate.
Journal ArticleDOI

Flexible High-Output Nanogenerator Based on Lateral ZnO Nanowire Array

TL;DR: A simple and effective approach, named scalable sweeping-printing-method, for fabricating flexible high-output nanogenerator (HONG) that can effectively harvesting mechanical energy for driving a small commercial electronic component is reported.
Journal ArticleDOI

Piezoelectric BaTiO₃ thin film nanogenerator on plastic substrates.

TL;DR: The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.
Related Papers (5)