scispace - formally typeset
Open AccessJournal ArticleDOI

Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm

Reads0
Chats0
TLDR
Advanced materials and devices are reported that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales.
Abstract
Here, we report advanced materials and devices that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales. A cointegrated collection of such energy-harvesting elements with rectifiers and microbatteries provides an entire flexible system, capable of viable integration with the beating heart via medical sutures and operation with efficiencies of ∼2%. Additional experiments, computational models, and results in multilayer configurations capture the key behaviors, illuminate essential design aspects, and offer sufficient power outputs for operation of pacemakers, with or without battery assist.

read more

Citations
More filters
Journal ArticleDOI

A Self‐Powered Implantable Drug‐Delivery System Using Biokinetic Energy

TL;DR: The first triboelectric-nanogenerator (TENG)-based self-powered implantable drug-delivery system is presented and ex vivo trans-sclera drug delivery in porcine eyes is demonstrated by utilizing the biokinetic energies of human hands.
Journal ArticleDOI

Self-Powered Direct Muscle Stimulation Using a Triboelectric Nanogenerator (TENG) Integrated with a Flexible Multiple-Channel Intramuscular Electrode.

TL;DR: A self-powered direct muscle stimulation system with a TENG as power source and waveform generator, and a multiple-channel intramuscular electrode to allow motoneuron mapping for stimulation efficiency optimization, which is potentially used for rehabilitative and therapeutic purpose to treat muscle function loss.
Journal ArticleDOI

Self-powered flexible inorganic electronic system

TL;DR: In this article, a review of self-powered flexible inorganic electronics is presented, covering material selection, mechanical design, fabrication method and their all-in-one integration on a single plastic substrate.
Journal ArticleDOI

3D printed bionic nanodevices

TL;DR: This review highlights the use of extrusion-based multi-material 3D printing technologies to interweave nanomaterials and fabricate novel bionic devices, which may enable next-generation bionic systems.
References
More filters
Journal ArticleDOI

Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays

TL;DR: This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.
Journal ArticleDOI

Human-powered wearable computing

TL;DR: This paper explores the possibility of harnessing the energy expended during the user's everyday actions to generate power for his or her computer, thus eliminating the impediment of batteries.
Journal ArticleDOI

1.6 V Nanogenerator for Mechanical Energy Harvesting Using PZT Nanofibers

TL;DR: A piezoelectric nanogenerator based on PZT nanofibers, with a diameter and length of approximately 60 nm and 500 microm, was reported, aligned on interdigitated electrodes of platinum fine wires and packaged using a soft polymer on a silicon substrate.
Journal ArticleDOI

Flexible High-Output Nanogenerator Based on Lateral ZnO Nanowire Array

TL;DR: A simple and effective approach, named scalable sweeping-printing-method, for fabricating flexible high-output nanogenerator (HONG) that can effectively harvesting mechanical energy for driving a small commercial electronic component is reported.
Journal ArticleDOI

Piezoelectric BaTiO₃ thin film nanogenerator on plastic substrates.

TL;DR: The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.
Related Papers (5)