scispace - formally typeset
Open AccessJournal ArticleDOI

Conformal piezoelectric energy harvesting and storage from motions of the heart, lung, and diaphragm

Reads0
Chats0
TLDR
Advanced materials and devices are reported that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales.
Abstract
Here, we report advanced materials and devices that enable high-efficiency mechanical-to-electrical energy conversion from the natural contractile and relaxation motions of the heart, lung, and diaphragm, demonstrated in several different animal models, each of which has organs with sizes that approach human scales. A cointegrated collection of such energy-harvesting elements with rectifiers and microbatteries provides an entire flexible system, capable of viable integration with the beating heart via medical sutures and operation with efficiencies of ∼2%. Additional experiments, computational models, and results in multilayer configurations capture the key behaviors, illuminate essential design aspects, and offer sufficient power outputs for operation of pacemakers, with or without battery assist.

read more

Citations
More filters
Journal ArticleDOI

Implantable and self-powered blood pressure monitoring based on a piezoelectric thinfilm: Simulated, in vitro and in vivo studies

TL;DR: In this article, the feasibility and efficacy of a piezoelectric thinfilm (PETF) based, implantable and self-powered monitor for blood pressure (BP) through theoretical, in vitro and in vivo studies was evaluated.
Journal ArticleDOI

Prolonged energy harvesting for ingestible devices.

TL;DR: The design and operation of an energy-harvesting galvanic cell for continuous in vivo temperature sensing and wireless communication and has the capacity to provide power for prolonged periods of time to the next generation of ingestible electronic devices located in the gastrointestinal tract is reported.
Journal ArticleDOI

Nanogenerator-Based Self-Powered Sensors for Wearable and Implantable Electronics.

TL;DR: This review focuses on the applications of self-powered generators as implantable and wearable sensors in health monitoring, biosensor, human-computer interaction, and other fields.
Journal ArticleDOI

A review of flexible perovskite oxide ferroelectric films and their application

TL;DR: In this article, the preparation of flexible devices based on perovskite oxide ferroelectrics, including transferring these freestanding films to flexible substrates after separating ferroelectric oxide oxide films from the hard substrates, such as Si and SrTiO3 crystals, and also direct fabrication methods without transferring process.
Journal ArticleDOI

Nanogenerator for Biomedical Applications.

TL;DR: A summary of several major actual applications of NG in the biomedical fields is made including the circulatory system, the neural system, cell modulation, microbe disinfection, and biodegradable electronics.
References
More filters
Journal ArticleDOI

Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays

TL;DR: This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.
Journal ArticleDOI

Human-powered wearable computing

TL;DR: This paper explores the possibility of harnessing the energy expended during the user's everyday actions to generate power for his or her computer, thus eliminating the impediment of batteries.
Journal ArticleDOI

1.6 V Nanogenerator for Mechanical Energy Harvesting Using PZT Nanofibers

TL;DR: A piezoelectric nanogenerator based on PZT nanofibers, with a diameter and length of approximately 60 nm and 500 microm, was reported, aligned on interdigitated electrodes of platinum fine wires and packaged using a soft polymer on a silicon substrate.
Journal ArticleDOI

Flexible High-Output Nanogenerator Based on Lateral ZnO Nanowire Array

TL;DR: A simple and effective approach, named scalable sweeping-printing-method, for fabricating flexible high-output nanogenerator (HONG) that can effectively harvesting mechanical energy for driving a small commercial electronic component is reported.
Journal ArticleDOI

Piezoelectric BaTiO₃ thin film nanogenerator on plastic substrates.

TL;DR: The results show that a nanogenerator can be used to power flexible displays by means of mechanical agitations for future touchable display technologies.
Related Papers (5)