Journal ArticleDOI
Crack detection and sizing technique by ultrasonic and electromagnetic methods
Reads0
Chats0
TLDR
In this paper, a 256-channel array system has been developed for the inspection of weldment of BWR internal components such as core shrouds and the TOFD crack sizing technique also can be applied using this system.About:
This article is published in Nuclear Engineering and Design.The article was published on 2001-06-01. It has received 77 citations till now. The article focuses on the topics: Phased array ultrasonics & Phased array.read more
Citations
More filters
Journal ArticleDOI
Ultrasonic imaging of defects in coarse-grained steels with the decomposition of the time reversal operator.
TL;DR: An analysis of the singular values of different waves contained in the data acquisition facilitates the identification of the subspace associated with the surface guided waves for filtering operations, which improves the signal-to-noise ratio.
Journal ArticleDOI
Model-driven fatigue crack characterization and growth prediction: A two-step, 3-D fatigue damage modeling framework for structural health monitoring
TL;DR: In this article, a two-step modeling framework is proposed to accurately characterize and continuously monitor fatigue damage from its embryonic initiation, through progressive growth to formation of macroscopic crack.
Journal ArticleDOI
Laser-Generation Based Imaging of Ultrasonic Wave Propagation on Welded Steel Plates and Its Application to Defect Detection
TL;DR: In this article, a moving diagram of wave propagation from the fixed point was obtained directly from the collected signals, and the position-time-amplitude maps (B-scope images) were reconstructed from the moving diagram along some lines perpendicular to the defect.
Journal ArticleDOI
Scattering of the Fundamental Shear Guided Wave From a Surface-Breaking Crack in Plate-Like Structures
TL;DR: A study of scattering from small cracks in a thin-walled (<12 mm) section with an incident plane SH0 guided wave at higher frequencies but remaining below the SH1 cutoff is presented here using quasi-static approximations.
Journal ArticleDOI
Influence of crack length on crack depth measurement by an alternating current potential drop technique
TL;DR: In this article, an alternating current potential drop (ACPD) technique is used for sizing the depth of surface cracks in metallic components, especially in low conducting materials such as austenitic stainless steel (SS).
References
More filters
Journal ArticleDOI
Improved ultrasonic testing by phased array technique and its application
TL;DR: In this article, two examples of phased array application were conducted in order to establish the availability of this technique as an actual NDT technique, and it was recognized that both types of scanning mode had the capability for defect detection and successful estimation of the defect size.
Journal ArticleDOI
Availability study of a phased array ultrasonic technique
TL;DR: In this paper, a technique d'essai par ultrason avec reseau en phase peut etre applicable a des centrales nucleaires for le controle electrique du faisceau d'electron and l'affichage image «B scope» en temps reel.
Related Papers (5)
Ultrasonic arrays for non-destructive evaluation: A review
Post-processing of the full matrix of ultrasonic transmit-receive array data for non-destructive evaluation
Damage due to hydrogen embrittlement and stress corrosion cracking
Jarmila Woodtli,Rolf Kieselbach +1 more