Journal ArticleDOI
Decolorization of basic dye solutions by electrocoagulation: An investigation of the effect of operational parameters
Reads0
Chats0
TLDR
The findings in this study shows that an increase in the current density up to 60-80 A m(-2) enhanced the color removal efficiency, the electrolysis time was 5 min and the range of pH was determined between 5.5 and 8.5 for two mentioned dye solutions.About:
This article is published in Journal of Hazardous Materials.The article was published on 2006-02-28. It has received 564 citations till now. The article focuses on the topics: Electrocoagulation & Dyeing.read more
Citations
More filters
Journal ArticleDOI
Electrocoagulation for the treatment of textile industry effluent--a review
V. Khandegar,Anil K. Saroha +1 more
TL;DR: The objective of the present manuscript is to review the potential of electrocoagulation for the treatment of industrial effluents, mainly removal of dyes from textile effluent.
Journal ArticleDOI
Removal of Synthetic Textile Dyes From Wastewaters: A Critical Review on Present Treatment Technologies
Kamaljit Singh,Sucharita Arora +1 more
TL;DR: In this article, a comparison of the present decolorization/degradation techniques for water-sensitized azo dyes is presented, where the hierarchy of reduce, reuse, and degrade is adopted and measures are taken to remove color from the industrial discharge.
Journal ArticleDOI
Electrocoagulation and advanced electrocoagulation processes: A general review about the fundamentals, emerging applications and its association with other technologies
Sergi Garcia-Segura,Maria Maesia S.G. Eiband,Jailson Vieira de Melo,Carlos A. Martínez-Huitle,Carlos A. Martínez-Huitle +4 more
TL;DR: The electrocoagulation (EC) process is an electrochemical means of introducing coagulants and removing suspended solids, colloidal material, and metals, as well as other dissolved solids from water and wastewaters as discussed by the authors.
Journal ArticleDOI
Copper, chromium and nickel removal from metal plating wastewater by electrocoagulation
Feryal Akbal,Selva Camcı +1 more
TL;DR: In this paper, the influence of electrode material, current density, wastewater pH and conductivity on removal performance was explored, and the results showed that metal removal increased with increasing current density and pH.
Journal ArticleDOI
Three-dimensional electrochemical process for wastewater treatment: A general review
TL;DR: In this paper, a comprehensive review on the development and application of 3D electrochemical process is presented, including anode and cathode materials, particle electrode materials and their catalysts.
References
More filters
Book
Standard methods for the examination of water and wastewater
TL;DR: The most widely read reference in the water industry, Water Industry Reference as discussed by the authors, is a comprehensive reference tool for water analysis methods that covers all aspects of USEPA-approved water analysis.
Journal ArticleDOI
Electrochemical technologies in wastewater treatment
TL;DR: In this article, the development, design and applications of electrochemical technologies in water and wastewater treatment are reviewed with particular focus on electrodeposition, electrocoagulation, electroflotation (EF), and electrooxidation.
Journal ArticleDOI
Fundamentals, present and future perspectives of electrocoagulation.
TL;DR: This paper presents an in-depth discussion and consideration of the factors that need to be addressed for optimum performance of this technology.
Journal ArticleDOI
Methods of decoloration of textile wastewaters
TL;DR: A survey of the most widely used and, according to many researchers, the most promising textile wastewaters decoloration methods is presented in this paper, where data on decolloration rates of different dye classes, obtained by means of different methods is gathered.
Journal ArticleDOI
Photocatalytic degradation of azo dye acid red 14 in water: investigation of the effect of operational parameters
TL;DR: In this article, it was shown that acid red 14 (AR14) can be photocatalytically degraded using TiO 2 suspensions irradiated by a UV-C lamp (30 W).