Journal ArticleDOI
Effect of curing on the internal structure of polyphenylene sulphide coatings
Reads0
Chats0
TLDR
In this article, internal structural changes in polyphenylene sulphide coatings have been investigated as a function of curing temperature by means of scanning electron microscopy, X-ray diffraction and IR spectroscopy.About:
This article is published in Thin Solid Films.The article was published on 1986-09-01. It has received 6 citations till now. The article focuses on the topics: Curing (chemistry).read more
Citations
More filters
Journal ArticleDOI
POLY(p-PHENYLENE SULFIDE)—AN OVERVIEW OF AN IMPORTANT ENGINEERING THERMOPLASTIC
TL;DR: The first known report of its synthesis was by Grenvesse in 1898 [1] and interest in the synthesis of PPS only began in 1948 when Macallum 121 described the preparation of phenylene sulfide polymers by the melt reaction of p-dichlorobenzene with sodium carbonate and sulfur as mentioned in this paper.
Journal ArticleDOI
Infrared spectroscopic analysis of poly(p-phenylene sulfide)
TL;DR: In this paper, Fourier transform infrared (FTIR) spectroscopy was employed to examine poly(p-phenylene sulfide) (PPS) and the fundamental vibrations of PPS were assigned based on those of known para-substituted benzene modes.
Book ChapterDOI
Poly(phenylene sulfide)s
J.F. Geibel,R.W. Campbell +1 more
TL;DR: Poly(phenylene sulfide), PPS, has a long history in the chemical literature and commercial development activities began approximately 40 years ago, ultimately leading to the first commercial production of PPS in 1973.
Journal ArticleDOI
A thermoanalytical study on solid‐state cure of poly(p‐phenylene sulfide)
TL;DR: Differential scanning calorimetry (DSC) was used to investigate the solid-state cure process of poly(phenylene sulfide)(PPS) resin in this article, where either air or oxygen was used as a curing atmosphere.
Reference EntryDOI
Polymers Containing Sulfur, Poly(Phenylene Sulfide)
Jon F. Geibel,John E. Leland +1 more
TL;DR: In this article, the history, syntheses, and properties of poly(p-phenylene sulfide) (PPS) resins are reviewed. And significant areas where PPS resins were used are presented.
References
More filters
Journal ArticleDOI
Modification of surface structure and crystallinity in compression‐molded poly(phenylene sulfide)
S. Radhakrishnan,V. M. Nadkarni +1 more
TL;DR: The structural modifications and changes in crystallinity of poly(phenylenesulfide) (PPS) during high-pressure molding and curing have been investigated as a function of pressure and temperature using wide-angle X-ray scattering (WAXS), infrared absorption (IR) and scanning electron microscopy (SEM) as discussed by the authors.
Journal ArticleDOI
Structure, growth and morphology of polyphenylene sulphide
TL;DR: The crystallinity, particle size and morphology of polyphenylene sulphide synthesized from 1, 4-dibromobenzene and sodium sulphide have been investigated by X-ray diffraction and scanning electron microscopy as discussed by the authors.
Related Papers (5)
Influence of curing temperature, silica nanoparticles- and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steel
Alka Phanasgaonkar,V.S. Raja +1 more