scispace - formally typeset
Journal ArticleDOI

Hybrid Effect in the Mechanical Properties of Short Sisal/Glass Hybrid Fiber Reinforced Low Density Polyethylene Composites:

TLDR
In this paper, the mechanical properties of these composites have been investigated with reference to the effects of orientation and composition of fibers in them, and it has been observed that the composites contining longitudinally oriented fibers exhibit better mechanical properties than those with randomly oriented ones.
Abstract
Hybrid composites of low density polyethylene (LDPE) reinforced with intimately mixed short sisal and glass fibers were prepared by solution mixing technique. The mechanical properties of these composites have been investigated with reference to the effects of orientation and composition of fibers in them. It has been observed that the composites contining longitudinally oriented fibers exhibit better mechanical properties than those with randomly oriented ones. Also it is seen that the mechanical properties increase with increase in the volume fraction of glass fibers in the hybrid composites. The effict of chemical modification of sisal fibers on the properties of 50:50 sisal/glass fiber composites has also been studied. The hybrid effect was calculated by the additive rule of hybrid mixtures using the mechanical properties of individual composites. A positive hybrid effect was echibited by the composites for all the mechanical properties except for elongation at break.

read more

Citations
More filters
Journal ArticleDOI

Polyester composites of short pineapple fiber and glass fiber: Tensile and impact properties

TL;DR: In this article, the impact performance of intimately mixed hybrid composites based on glass fiber (GF) and pineapple leaf fiber (PALF) was investigated, and the composite was fabricated at constant volume fraction of fiber 0.3 and matrix 0.7.
Journal ArticleDOI

Resin–Sisal and Wood Flour Composites Made from Unsaturated Polyester Thermosets

TL;DR: Marcovich, Norma Esther as discussed by the authors, NormaEsteban et al. as discussed by the authors presented the work of the Instituto de Investigaciones en Ciencia y Tecnologia de Materiales (IICM) in Mar del Plata, Argentina.
Journal ArticleDOI

Hybridization Effect of Glass Fibre on Mechanical, Morphological and Thermal Properties of Polypropylene-Bamboo/Glass Fibre Hybrid Composites:

TL;DR: In this article, an intermeshing counter-rotating twin-screw extruder was used for polypropylene-bamboo fiber reinforced composites. But the extruders were not used for the BFRP.
Journal ArticleDOI

Mechanical properties of surface‐modified ultra‐high molecular weight polyethylene fiber reinforced natural rubber composites

TL;DR: In this article, the effects of fiber surface treatment and fiber mass fraction on the mechanical properties of the UHMWPE reinforced natural rubber composites were investigated, and the results showed that the surface roughness and the oxygen-containing groups on the surface of the fibers could be effectively increased.
References
More filters
Journal ArticleDOI

Hybrid carbon and glass fibre composites

TL;DR: In this article, two types of hybrid composite materials, consisting of alternatively laminated layers of type 1 carbon fibres and glass fibres in an epoxy resin, have been made, with the alternate layers either unbonded or bonded together.
Journal ArticleDOI

Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour

TL;DR: In this article, the authors examined two types of carbon fibres with different mechanical properties but similar surface treatments, and the results of all the mechanical properties examined (modulus, strength, stress intensity factor, fracture energies) under quasi-static and fast testing conditions do not show any synergism.
Journal ArticleDOI

Mechanical properties of jute-reinforced plastics

TL;DR: In this paper, the mechanical properties of epoxy and polyester resins reinforced unidirectionally by jute and glass fibres singly and in combination as a hybrid were analyzed.
Journal ArticleDOI

Carbon fibre and glass fibre hybrid reinforced plastics

John Summerscales, +1 more
- 01 Jul 1978 - 
TL;DR: A review of the literature on carbon fiber and glass fibre hybrid reinforced plastics is presented in this article, where it is shown that the incorporation of both fibres into a single matrix sometimes leads to better properties than would be expected from consideration of the rule of mixtures.
Journal ArticleDOI

Compression strength of carbon, glass and Kevlar-49 fibre reinforced polyester resins

TL;DR: In this article, the same range of resins were used as a matrix material for a series of composites reinforced with carbon, glass and aromatic polyamide fibres, and the composites were unidirectionally reinforced, having been manufactured by pultrusion, and were compression tested in the fibre direction.
Related Papers (5)