Journal ArticleDOI
HYLIFE-II: A Molten-Salt Inertial Fusion Energy Power Plant Design — Final Report
Ralph W. Moir,R. L. Bieri,Xiang M. Chen,T. J. Dolan,M. A. Hoffman,P.A. House,R. L. Leber,J. D. Lee,Y. T. Lee,J. C. Liu,G. R. Longhurst,Wayne R. Meier,P. F. Peterson,Ronald W. Petzoldt,V. E. Schrock,M. Tobin,W. H. Williams +16 more
Reads0
Chats0
TLDR
In this article, the liquid-wall HYLIFE-II conceptual design has been presented, which has been shown to reduce the electricity cost by using a neutronically thick array of flowing molten-salt jets, which will not burn, has a low tritium solubility and inventory, and protects the chamber walls.Abstract:
Enhanced safety and performance improvements have been made to the liquid-wall HYLIFE reactor, yielding the current HYLIFE-II conceptual design. Liquid lithium has been replaced with a neutronically thick array of flowing molten-salt jets (Li[sub 2]BeF[sub 4] or Flibe), which will not burn, has a low tritium solubility and inventory, and protects the chamber walls, giving a robust design with a 30-yr lifetime. The tritium inventory is 0.5 g in the molten salt and 140 g in the metal of the tube walls, where it is less easily released. The 5-MJ driver is a recirculating induction accelerator estimated to cost $570 million (direct costs). Heavy-ion targets yield 350 MJ, six times per second, to produce 940 MW of electrical power for a cost of 6.5 cents/kW[center dot]h. Both larger and smaller yields are possible with correspondingly lower and higher pulse rates. When scaled up to 1934 MW (electric), the plant design has a calculated cost of electricity of 4.5 cents/kW[center dot]h. The design did not take into account potential improved plant availability and lower operations and maintenance costs compared with conventional power plant experience, resulting from the liquid wall protection. Such improvements would directly lower the electricity cost figures. For example,more » if the availability can be raised from the conservatively assumed 75% to 85% and the annual cost of component replacement, operations, and maintenance can be reduced from 6% to 3% of direct cost, the cost of electricity would drop to 5.0 and 3.9 cents/kW[center dot]h for 1- and 2-GW (electric) cases. 50 refs., 15 figs., 3 tabs.« lessread more
Citations
More filters
Journal ArticleDOI
Laser nuclear fusion: current status, challenges and prospect
TL;DR: In this paper, a review of the basic current concepts of laser fusion and main problems and challenges facing the research community dealing with this field is discussed together with the more recent ones, including fast ignition, shock ignition and impact ignition fusion.
Journal ArticleDOI
Heavy-ion fusion final focus magnet shielding designs
J F Latkowski,Wayne R. Meier +1 more
TL;DR: In this article, a self-consistent final focusing model was proposed to improve the lifetime of the last set of focusing magnets for the HYLIFE-II power plant design.
Journal ArticleDOI
Inertial fusion energy : A clearer view of the environmental and safety aspects
TL;DR: In this paper, a consistent method for the comparison of environmental, safety, and health (ES&H) characteristics of fusion power plant designs is developed, which can be used to increase the likelihood of fusion achieving its full potential with respect to ES&H characteristics.
Journal ArticleDOI
A credible pathway for heavy ion driven target fabrication and injection
D. T. Goodin,Arthur Nobile,Neil Alexander,L.C. Brown,James L. Maxwell,J. Pulsifer,A.M. Schwendt,Mark S. Tillack,R.S. Willms +8 more
TL;DR: In this article, the authors present the requirements for heavy ion driven IFE target fabrication and injection, and present the current status of and results from the development program, as well as an entire pathway from beginning to end is outlined for fabrication of a high gain, distributed radiator target.
Journal ArticleDOI
Dynamics of Oscillating Turbulent Liquid Sheets
TL;DR: In this paper, the near field dynamics of obliquely oscillating turbulent liquid sheets were investigated in scaled experiments and the results can be used to provide design guidelines for thick liquid protection.
References
More filters
ReportDOI
High-Yield Lithium-Injection Fusion-Energy (HYLIFE) reactor
TL;DR: The High-Yield Lithium-Injection Fusion Energy (HYLIFE) concept to convent inertial confinement fusion energy into electric power has undergone intensive research and refinement at LLNL since 1978 as discussed by the authors, focusing on the HYLIFE reaction chamber (which includes neutronics, liquid-metal jet-array hydrocynamics, and structural design), supporting systems, primary steam system and balance of plant, safety and environmental protection, and costs.
Journal ArticleDOI
Waste Disposal Assessment of HYLIFE-II Structure
TL;DR: The initial scoping analysis indicates that by using Type 304 stainless steel (SS), most of the vacuum vessel's structural mass in the HYLIFE-II inertial fusion energy power plant conceptual design cou....
Journal ArticleDOI
HYLIFE-II Inertial Confinement Fusion Reactor Design
TL;DR: The HYLIFE-II inertial fusion power plant design study uses a liquid fall, in the form of jets to protect the first structural wall from neutron damage, x-rays, and blast to provide a 30-y lifetime.
Journal ArticleDOI
Hylife-II Inertial Fusion Energy Power Plant Design
TL;DR: In this article, an inertial fusion power plant design study uses a liquid fall, in the form of jets, to protect the first structural wall from neutron damage, x rays, and blast to provide a 30-y lifetime.
Journal ArticleDOI
Updated comparison of economics of fusion reactors with advanced fission reactors
TL;DR: In this article, the projected cost of electricity (COE) for fusion is compared with that from current and advanced nuclear fission and coal-fired plants, and the results show COEs of about 59--74 mills/kWh for the fusion designs considered.
Related Papers (5)
Osiris and SOMBRERO inertial fusion power plant designs–summary, conclusions, and recommendations
On the exploration of innovative concepts for fusion chamber technology
Mohamed A. Abdou,Alice Ying,Neil B. Morley,K. Gulec,Sergey Smolentsev,Mike Kotschenreuther,S. Malang,Steven J. Zinkle,T.D. Rognlien,P.J. Fogarty,B.E. Nelson,Richard E. Nygren,K. McCarthy,Mahmoud Z. Youssef,Nasr M. Ghoniem,D.K. Sze,C.P.C. Wong,Mohamed E. Sawan,H.Y. Khater,R. Woolley,Richard F. Mattas,Ralph W. Moir,Shahram Sharafat,Jeffrey N. Brooks,Ahmed Hassanein,David A. Petti,Mark S. Tillack,M.A. Ulrickson,Tetsuya Uchimoto +28 more