Journal ArticleDOI
Kinetics, experimental and reactor modeling studies of the carbon dioxide reforming of methane (CDRM) over a new Ni /CeO2-ZrO2 catalyst in a packed bed tubular reactor
Reads0
Chats0
TLDR
In this paper, the Eley-Rideal (ER) formulation was used for modeling and simulation of the carbon dioxide reforming of methane (CDRM) in a catalytic packed bed reactor over a new Ni/ CeO 2 -ZrO 2 catalyst.About:
This article is published in Chemical Engineering Science.The article was published on 2007-08-01. It has received 86 citations till now. The article focuses on the topics: Plug flow reactor model & Carbon dioxide reforming.read more
Citations
More filters
Journal ArticleDOI
Dry reforming of methane: Influence of process parameters—A review
TL;DR: In this article, the authors explored the influences of the active metal, support, promoter, preparation methods, calcination temperature, reducing environment, particle size and reactor choice on catalytic activity and carbon deposition for the dry reforming of methane.
Journal ArticleDOI
Recent Advances in Dry Reforming of Methane Over Ni-Based Catalysts
TL;DR: In this article, a comprehensive review has been conducted on the role and performance of Ni-based catalysts in the dry reforming of methane (DRM) reaction, and the outlook of Ni based catalysts has been proposed.
Journal ArticleDOI
Ni/CeO2-ZrO2 catalysts for the dry reforming of methane
TL;DR: In this paper, the textural and structural properties of catalysts and supports were studied in their calcined, reduced and used state by N 2 adsorption-desorption, XRD, UV-vis DRS, TPR, SEM-EDS and TPH.
Journal ArticleDOI
Facile Route for Synthesizing Ordered Mesoporous Ni–Ce–Al Oxide Materials and Their Catalytic Performance for Methane Dry Reforming to Hydrogen and Syngas
TL;DR: In this article, a series of ordered mesoporous Ni-Ce-Al composite oxides with various cerium contents were synthesized via a one-pot route: evaporation-induced self-assembly (EISA) strategy and tested in methane dry reforming for hydrogen and synthesis gas production.
Journal ArticleDOI
Kinetic and mechanistic aspects for CO2 reforming of methane over Ni based catalysts
TL;DR: A review on the kinetic and mechanistic aspects for DRM reaction with focus on Ni-based catalysts is presented in this article, where a survey of the differing RDS presented in literature based on the widely used Langmuir Hinshelwood Hougen Watson (LHHW) models for Ni-catalyzed DRM reactions are categorized and presented along with the importance of experimental techniques for justifying mechanistic formulation.
References
More filters
Book
Chemical Reaction Engineering
TL;DR: An overview of Chemical Reaction Engineering is presented, followed by an introduction to Reactor Design, and a discussion of the Dispersion Model.
Book
Elements of Chemical Reaction Engineering
TL;DR: In this paper, the authors present an approach to scale-up of a continuous-flow-reactor with a CSTR design and demonstrate the performance of the CSTRs.
Journal ArticleDOI
Mechanism and modeling of nitrogen chemistry in combustion
James A. Miller,Craig T. Bowman +1 more
TL;DR: In this article, the mechanisms and rate parameters for the gas-phase reactions of nitrogen compounds that are applicable to combustion-generated air pollution are discussed and illustrated by comparison of results from detailed kinetics calculations with experimental data.
Book
Chemical Reactor Analysis and Design
TL;DR: The fundamental Mass, Energy, and Momentum Balance Equations The Batch and Semibatch Reactors The Plug Flow Reactor The perfectly mixed flow Reactor Fixed Bed Catalytic Reactors Nonideal Flow Patterns and Population Balance Models Fluidized Bed and Transport Reactors Multiphase Flow Reactors Author Index Subject Index as mentioned in this paper
Book
Catalysis by Ceria and Related Materials
TL;DR: The use of ceria-based catalysts in automotive catalysts was discussed in this paper, where the authors showed that the properties and thermal stability of Ceria-zirconia and related materials can be characterized using surface analysis techniques.