Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
TLDR
In this article, the influence of process parameters in SLM (e.g., scan speed and layer thickness) and various age hardening treatments on the microstructure and mechanical properties of 18Ni-300 steel is investigated.About:
This article is published in Physics Procedia.The article was published on 2011-01-01 and is currently open access. It has received 425 citations till now. The article focuses on the topics: Selective laser sintering & Selective laser melting.read more
Citations
More filters
Journal ArticleDOI
Microstructural Evolution during Heat Treatment of 3D Printed Maraging Steel
TL;DR: Maraging steels are advance high strength steels which have gained much interest in defense, aerospace, energy and automotive industries where high strength and fracture toughness is required [1, 2].
Evaluation of Strength and Microstructural Properties of Heat Treated High-Molybdenum Content Maraging Steel
TL;DR: In this paper, the effect of high molybdenum content as an alloying element on the strength and microstructural properties of 11% nickel-1.25% titanium maraging steel was evaluated.
Journal ArticleDOI
Laser additive manufacturing and post-heat treatment on microstructure and mechanical properties of 9Cr steel
TL;DR: In this paper , the LMD-9Cr steel sample has high density, the maximum tensile strength of the sample is 1057.75 MPa, which is much higher than the standard cast 9Cr steel of 650 MPa.
Journal ArticleDOI
Modeling and Measurement of the Effective Young Modulus of Porous Biomedical Materials Manufactured via SLM
TL;DR: In this paper, two different materials used in biomedical applications were processed by selective laser melting (SLM) and the process parameters were set in order to adjust the materials porosity levels.
References
More filters
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
TL;DR: In this paper, the authors investigated the possibility of producing medical or dental parts by selective laser melting (SLM) and developed a procedure to fabricate frameworks for complex dental prostheses.
Journal ArticleDOI
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
TL;DR: In this article, the authors investigated the possibility of producing medical or dental parts by selective laser melting (SLM) and developed a procedure to fabricate frameworks for complex dental prostheses.
Journal ArticleDOI
Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steel
TL;DR: In this paper, the authors investigated the precipitation hardening behavior of an 18Ni-Co-Mo-Ti maraging 300 solution treated and aged in the 440-650°C range.
Journal ArticleDOI
Densification and microstructural evaluation during laser sintering of M2 high speed steel powder
Abdolreza Simchi,H. Asgharzadeh +1 more
TL;DR: In this paper, the densification and microstructure of M2 high speed steel powder processed by direct laser sintering method was studied, and test specimens were produced using a 200 W continuous...
Journal ArticleDOI
Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steel
Juan Manuel Pardal,Sérgio Souto Maior Tavares,M. P. Cindra Fonseca,Hamilton Ferreira Gomes de Abreu,J. J. M. Silva +4 more
TL;DR: In this paper, the influence of taking into account the chemical compositions of austenite and martensite phases in the results by the direct comparison method was evaluated by X-ray diffraction.