Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
TLDR
In this article, the influence of process parameters in SLM (e.g., scan speed and layer thickness) and various age hardening treatments on the microstructure and mechanical properties of 18Ni-300 steel is investigated.About:
This article is published in Physics Procedia.The article was published on 2011-01-01 and is currently open access. It has received 425 citations till now. The article focuses on the topics: Selective laser sintering & Selective laser melting.read more
Citations
More filters
Journal ArticleDOI
In-Situ Formation of Titanium Boride and Titanium Carbide by Selective Laser Melting
Timo Kühnle,Knut Partes +1 more
TL;DR: In this paper, the Selective Laser Melting of a high-energy ball milled Ti -B 4 C powder blend was performed and the mixing ratio of the powder blend is settled to fulfill the reaction 3 Ti + B 4 C→ TiC + 2 TiB 2.
Journal ArticleDOI
Selective laser melting of ultra-high-strength TRIP steel: processing, microstructure, and properties
J. Sander,J. Hufenbach,M. Bleckmann,Lars Giebeler,Horst Wendrock,Steffen Oswald,Thomas Gemming,Jürgen Eckert,Jürgen Eckert,Uta Kühn +9 more
TL;DR: In this paper, the influence of the selective laser melting (SLM) process parameters on a FeCr4Mo1V1W8C1 (wt%) alloy regarding microstructure and mechanical behavior was investigated.
Journal ArticleDOI
Dynamic conformal cooling improves injection molding
TL;DR: In this paper, a mold with conformal cooling channels was designed and additively manufactured in maraging steel (1.2709) and then experimentally tested, based on the results of this simulation, a mold had been designed and added to a machined baseplate.
Journal ArticleDOI
Review on additive manufacturing of tooling for hot stamping
Dimitrios Chantzis,Xiaochuan Liu,Denis J. Politis,Omer El Fakir,Teun Yee Chua,Zhusheng Shi,Liliang Wang +6 more
TL;DR: A comprehensive review is performed for the state-of-the-art hot-forming tooling designs in addition to identifying the future direction of Additive Manufactured (AM) tools.
Journal ArticleDOI
T6 heat-treated AlSi10Mg alloys additive-manufactured by selective laser melting
Xianglong Yu,Lianfeng Wang +1 more
TL;DR: In this paper, a two-stage T6 heat treatment has been proposed to tailor mechanical properties of the selective laser melting fabricated AlSi10Mg alloy, including solid solution at 535 oC and artificial aging at 158 oC for 10 h.
References
More filters
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
TL;DR: In this paper, the authors investigated the possibility of producing medical or dental parts by selective laser melting (SLM) and developed a procedure to fabricate frameworks for complex dental prostheses.
Journal ArticleDOI
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
TL;DR: In this article, the authors investigated the possibility of producing medical or dental parts by selective laser melting (SLM) and developed a procedure to fabricate frameworks for complex dental prostheses.
Journal ArticleDOI
Modeling of precipitation hardening during the aging and overaging of 18Ni–Co–Mo–Ti maraging 300 steel
TL;DR: In this paper, the authors investigated the precipitation hardening behavior of an 18Ni-Co-Mo-Ti maraging 300 solution treated and aged in the 440-650°C range.
Journal ArticleDOI
Densification and microstructural evaluation during laser sintering of M2 high speed steel powder
Abdolreza Simchi,H. Asgharzadeh +1 more
TL;DR: In this paper, the densification and microstructure of M2 high speed steel powder processed by direct laser sintering method was studied, and test specimens were produced using a 200 W continuous...
Journal ArticleDOI
Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steel
Juan Manuel Pardal,Sérgio Souto Maior Tavares,M. P. Cindra Fonseca,Hamilton Ferreira Gomes de Abreu,J. J. M. Silva +4 more
TL;DR: In this paper, the influence of taking into account the chemical compositions of austenite and martensite phases in the results by the direct comparison method was evaluated by X-ray diffraction.