Journal ArticleDOI
Optimization of Key Process Parameters on Electro Chemical Honing (ECH) of External Cylindrical Surfaces of Titanium alloy Ti 6Al 4V
Reads0
Chats0
TLDR
In this paper, the authors describe the design and fabrication of an indigenously developed tooling setup for Electro Chemical Honing (ECH) of an external cylindrical components.About:
This article is published in Materials Today: Proceedings.The article was published on 2017-01-01. It has received 13 citations till now. The article focuses on the topics: Honing & Surface finish.read more
Citations
More filters
Journal ArticleDOI
Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis
Sunpreet Singh,Chander Prakash,Alokesh Pramanik,Animesh Basak,Rajasekhara Shabadi,Grzegorz Królczyk,Marta Bogdan-Chudy,Atul Babbar +7 more
TL;DR: Overall results highlighted that the MRF-AF is a potential technique for obtaining nano-scale finishing of the high-strength β-phase Ti-Nb-Ta-Zr alloy for orthopedic applications.
Journal ArticleDOI
Annular Surface Micromachining of Titanium Tubes Using a Magnetorheological Polishing Technique
TL;DR: It is shown from experimental results that diamond abrasive particles are appropriate for fine finishing the internal surface of the titanium-alloy tube and the polishing performance is excellent at high magnetic field strength, fast rotation speed, and high abrasive-particle concentration.
Journal ArticleDOI
Optimization of process variable in abrasive water jet Machining (AWJM) of Ti-6Al-4V alloy using Taguchi methodology
TL;DR: In this article, a study of the machining process variable (pressure, abrasive throughput, stopping distance and transverse speed) on the response variable (machining time, surface roughness and HRC strength of the finished surface) is considered.
Journal ArticleDOI
Comparison of prediction capabilities of MRR parameter using RSM and ANN for dry turning of Inconel 825 alloy using cryogenically treated tungsten carbide tool
TL;DR: In this paper, a comparison of the prediction capabilities of RSM and ANN for dry turning of Inconel 825 using tungsten carbide inserts along with optimisation of the cutting variables for maximum machining was made.
Journal ArticleDOI
Analysis & Optimization of Parameters During EDM of Aluminium Metal Matrix Composite
Mumtaz Rizwee,P. Sudhakar Rao +1 more
TL;DR: In this paper, the effect of process parameter on output response during the EDM of Aluminium7075- Boron carbide-Graphite (Al/B4C/Gr) metal matrix composite (MMC).
References
More filters
Journal ArticleDOI
Characteristics of cutting forces and chip formation in machining of titanium alloys
TL;DR: In this article, a cyclic force was produced during the formation of segmented chips and the force frequency was the same as the chip segmentation frequency, and the peak of the cyclic forces was 1.18 times that producing the continuous chip.
Journal ArticleDOI
Modeling of material removal in mechanical type advanced machining processes: a state-of-art review
TL;DR: A comprehensive and exhaustive review of various analytical material removal models for different advanced machining processes is presented in this article, which is intended to fulfil this need in the area of advanced machined material removal.
Journal ArticleDOI
Electrochemical micromachining of titanium surfaces for biomedical applications
TL;DR: In this paper, a new ECM technique, jet-electrochemical micromachining (Jet-EMM), was employed to produce micro-hole patterns on titanium specimens, which are hundreds of micrometers in diameter and have an aspect ratio of over 1.3.
Journal ArticleDOI
On the electrochemical machining of some titanium alloys in bromide electrolytes
TL;DR: In this article, the current efficiency for the dissolution of a number of titanium alloys (IMI 115, 230, 318 and 550) in a variety of electrolytes based on potassium bromide was determined.
Journal ArticleDOI
A potential method for electrochemical micromachining of titanium alloy Ti6Al4V
TL;DR: In this article, a new electrochemical micromachining method named the con- fined etchant layer technique (CELT) was explored on the micro-scale trape-zoidal slots were replicated on titanium alloy by using a mold with the corresponding negative microstructures (trapezoidal teeth).