Journal ArticleDOI
Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials
TLDR
In this article, a review of polymer-layered silicate nanocomposites is presented, where the polymer chains are sandwiched in between silicate layers and exfoliated layers are more or less uniformly dispersed in the polymer matrix.Abstract:
This review aims at reporting on very recent developments in syntheses, properties and (future) applications of polymer-layered silicate nanocomposites. This new type of materials, based on smectite clays usually rendered hydrophobic through ionic exchange of the sodium interlayer cation with an onium cation, may be prepared via various synthetic routes comprising exfoliation adsorption, in situ intercalative polymerization and melt intercalation. The whole range of polymer matrices is covered, i.e. thermoplastics, thermosets and elastomers. Two types of structure may be obtained, namely intercalated nanocomposites where the polymer chains are sandwiched in between silicate layers and exfoliated nanocomposites where the separated, individual silicate layers are more or less uniformly dispersed in the polymer matrix. This new family of materials exhibits enhanced properties at very low filler level, usually inferior to 5 wt.%, such as increased Young’s modulus and storage modulus, increase in thermal stability and gas barrier properties and good flame retardancy.read more
Citations
More filters
Journal ArticleDOI
Polyurethane/clay nanocomposites foams: processing, structure and properties
TL;DR: In this paper, Clay dispersion of polyurethane nanocomposites was investigated by X-ray diffraction and transmission electron microscopy and the presence of clay results in an increase in cell density and a reduction of cell size compared to pure PU foam.
Journal ArticleDOI
New nanocomposite materials based on plasticized poly(l-lactide) and organo-modified montmorillonites: thermal and morphological study
Marie-Amélie Paul,Michaël Alexandre,Philippe Degée,Catherine Henrist,André Rulmont,Philippe Dubois +5 more
TL;DR: In this paper, the intercalation of the polymer chains between the aluminosilicates layers and morphological structure of the filled PLAs were analyzed by wide-angle X-ray scattering (WAXS).
Journal ArticleDOI
"Bound but not gagged"--immobilizing single-site alpha-olefin polymerization catalysts.
Journal ArticleDOI
Biopolymer based nanocomposites: Comparing layered silicates and microcrystalline cellulose as nanoreinforcement
TL;DR: In this paper, the authors compared the mechanical, thermal and barrier properties of two different types of biopolymer-based nanocomposites, namely, bentonite a layered silicate and micro-crystalline cellulose (MCC).
Journal ArticleDOI
Polymer layered silicate nanocomposites
TL;DR: A more general technique involves compatibilization of the silicate by intercalation of an organic molecule, typically an organic alkylammonium salt, that replaces the cations in the interlayer galleries to form an organically modified layered silicate (OLS) as discussed by the authors.
References
More filters
Journal ArticleDOI
Mechanical properties of nylon 6-clay hybrid
Yoshitsugu Kojima,Arimitsu Usuki,Masaya Kawasumi,Akane Okada,Yoshiaki Fukushima,Toshio Kurauchi,Osami Kamigaito +6 more
TL;DR: In this paper, the properties of nylon 6-clay hybrids, such as molecular composites of nylon and silicate layers of montmorillonite and saponite, NCH's and NCHP's, respectively, have been synthesized.
Journal ArticleDOI
Synthesis of nylon 6-clay hybrid
Arimitsu Usuki,Yoshitsugu Kojima,Masaya Kawasumi,Akane Okada,Yoshiaki Fukushima,Toshio Kurauchi,Osami Kamigaito +6 more
TL;DR: In this paper, the carboxyl and amino end groups were attributed to ammonium cations (-NH3+) of nylon molecules, because the difference agreed with the anion site concentration of the montmorillonite in NCH.
Journal ArticleDOI
Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites
TL;DR: In this article, an overview of the research to date on the use of clays, dispersed at the nanometer level, in polymers for improving thermal stability and flammability is presented.
Journal ArticleDOI
Synthesis and properties of polyimide–clay hybrid
TL;DR: A polyimide hybrid with montmorillonite clay mineral has been synthesized from a dimethylacetamide (DMAC) solution of poly(amic acid) and a DMAC dispersion of montmoroniite intercalated with an ammonium salt of dodecylamine as mentioned in this paper.
Journal ArticleDOI
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
TL;DR: In this paper, the dispersibility of 10-A-thick silicate layers of the clays in the hybrid was investigated by using a transmission electron microscope and X-ray diffractometer.
Related Papers (5)
Polymer/layered silicate nanocomposites: a review from preparation to processing
An assessment of high voltage electron microscopy (HVEM). An invited review
M.H. Loretto,R.E. Smallman +1 more