Journal ArticleDOI
Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials
TLDR
In this article, a review of polymer-layered silicate nanocomposites is presented, where the polymer chains are sandwiched in between silicate layers and exfoliated layers are more or less uniformly dispersed in the polymer matrix.Abstract:
This review aims at reporting on very recent developments in syntheses, properties and (future) applications of polymer-layered silicate nanocomposites. This new type of materials, based on smectite clays usually rendered hydrophobic through ionic exchange of the sodium interlayer cation with an onium cation, may be prepared via various synthetic routes comprising exfoliation adsorption, in situ intercalative polymerization and melt intercalation. The whole range of polymer matrices is covered, i.e. thermoplastics, thermosets and elastomers. Two types of structure may be obtained, namely intercalated nanocomposites where the polymer chains are sandwiched in between silicate layers and exfoliated nanocomposites where the separated, individual silicate layers are more or less uniformly dispersed in the polymer matrix. This new family of materials exhibits enhanced properties at very low filler level, usually inferior to 5 wt.%, such as increased Young’s modulus and storage modulus, increase in thermal stability and gas barrier properties and good flame retardancy.read more
Citations
More filters
Journal ArticleDOI
Studies on nonisothermal crystallization of HDPE/POSS nanocomposites
TL;DR: In this article, the nonisothermal crystallization of HDPE/POSS nanocomposites (POSS content varying from 1 to 10 wt%) was studied using differential scanning calorimetry (DSC) technique.
Journal ArticleDOI
Melt‐compounded natural rubber nanocomposites with pristine and organophilic layered silicates of natural and synthetic origin
TL;DR: In this paper, composites based on natural rubber (NR) and containing organophilic and pristine layered silicates of natural and synthetic origin were produced by melt com- pounding and sulfur curing.
Journal ArticleDOI
Mechanical milling as a technology to produce structural and functional bio-nanocomposites
TL;DR: In this paper, a review of the recent literature on the use of mechanical milling as a green technique to produce bio-nanocomposites is presented, and it is demonstrated how this technology could be considered an interesting option for the fabrication of novel nanostructured materials from environmental friendly resources.
Journal ArticleDOI
Approaches in designing non-toxic polymer surfaces to deter marine biofouling
TL;DR: In this paper, the authors focus on recent progress in the development and fabrication of surfaces that have antifouling and/or foul release properties by looking at selected examples of materials.
Journal ArticleDOI
Barrier properties of model epoxy nanocomposites
TL;DR: In this paper, the barrier properties of two sets of model epoxy nanocomposites with variations in nanoplatelet exfoliation level and aspect ratio have been investigated, and the results show that both the exfolation level and the aspect ratio of nanoplatelets have a significant effect on the nanocompositionite barrier properties.
References
More filters
Journal ArticleDOI
Mechanical properties of nylon 6-clay hybrid
Yoshitsugu Kojima,Arimitsu Usuki,Masaya Kawasumi,Akane Okada,Yoshiaki Fukushima,Toshio Kurauchi,Osami Kamigaito +6 more
TL;DR: In this paper, the properties of nylon 6-clay hybrids, such as molecular composites of nylon and silicate layers of montmorillonite and saponite, NCH's and NCHP's, respectively, have been synthesized.
Journal ArticleDOI
Synthesis of nylon 6-clay hybrid
Arimitsu Usuki,Yoshitsugu Kojima,Masaya Kawasumi,Akane Okada,Yoshiaki Fukushima,Toshio Kurauchi,Osami Kamigaito +6 more
TL;DR: In this paper, the carboxyl and amino end groups were attributed to ammonium cations (-NH3+) of nylon molecules, because the difference agreed with the anion site concentration of the montmorillonite in NCH.
Journal ArticleDOI
Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites
TL;DR: In this article, an overview of the research to date on the use of clays, dispersed at the nanometer level, in polymers for improving thermal stability and flammability is presented.
Journal ArticleDOI
Synthesis and properties of polyimide–clay hybrid
TL;DR: A polyimide hybrid with montmorillonite clay mineral has been synthesized from a dimethylacetamide (DMAC) solution of poly(amic acid) and a DMAC dispersion of montmoroniite intercalated with an ammonium salt of dodecylamine as mentioned in this paper.
Journal ArticleDOI
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
TL;DR: In this paper, the dispersibility of 10-A-thick silicate layers of the clays in the hybrid was investigated by using a transmission electron microscope and X-ray diffractometer.
Related Papers (5)
Polymer/layered silicate nanocomposites: a review from preparation to processing
An assessment of high voltage electron microscopy (HVEM). An invited review
M.H. Loretto,R.E. Smallman +1 more