Showing papers by "Christ University published in 2018"

IOT Based Smart Agriculture System

Abstract: Smart agriculture is an emerging concept, because IOT sensors are capable of providing information about agriculture fields and then act upon based on the user input. In this Paper, it is proposed to develop a Smart agriculture System that uses advantages of cutting edge technologies such as Arduino, IOT and Wireless Sensor Network. The paper aims at making use of evolving technology i.e. IOT and smart agriculture using automation. Monitoring environmental conditions is the major factor to improve yield of the efficient crops. The feature of this paper includes development of a system which can monitor temperature, humidity, moisture and even the movement of animals which may destroy the crops in agricultural field through sensors using Arduino board and in case of any discrepancy send a SMS notification as well as a notification on the application developed for the same to the farmer’s smartphone using Wi-Fi/3G/4G. The system has a duplex communication link based on a cellularInternet interface that allows for data inspection and irrigation scheduling to be programmed through an android application. Because of its energy autonomy and low cost, the system has the potential to be useful in water limited geographically isolated areas.

Magnetohydrodynamic three-dimensional flow of nanofluids with slip and thermal radiation over a nonlinear stretching sheet: a numerical study

Abstract: A numerical simulation for mixed convective three-dimensional slip flow of water-based nanofluids with temperature jump boundary condition is presented. The flow is caused by nonlinear stretching surface. Conservation of energy equation involves the radiation heat flux term. Applied transverse magnetic effect of variable kind is also incorporated. Suitable nonlinear similarity transformations are used to reduce the governing equations into a set of self-similar equations. The subsequent equations are solved numerically by using shooting method. The solutions for the velocity and temperature distributions are computed for several values of flow pertinent parameters. Further, the numerical values for skin-friction coefficients and Nusselt number in respect of different nanoparticles are tabulated. A comparison between our numerical and already existing results has also been made. It is found that the velocity and thermal slip boundary condition showed a significant effect on momentum and thermal boundary layer thickness at the wall. The presence of nanoparticles stabilizes the thermal boundary layer growth.

Nonlinear radiated MHD flow of nanoliquids due to a rotating disk with irregular heat source and heat flux condition

Abstract: This research is made to visualize the nonlinear radiated flow of hydromagnetic nano-fluid induced due to rotation of the disk. The considered nano-fluid is a mixture of water and Ti6Al4V or AA7072 nano-particles. The various shapes of nanoparticles like lamina, column, sphere, tetrahedron and hexahedron are chosen in the analysis. The irregular heat source and nonlinear radiative terms are accounted in the law of energy. We used the heat flux condition instead of constant surface temperature condition. Heat flux condition is more relativistic and according to physical nature of the problem. The problem is made dimensionless with the help of suitable similarity constraints. The Runge-Kutta-Fehlberg scheme is adopted to find the numerical solutions of governing nonlinear ordinary differential systems. The solutions are plotted by considering the various values of emerging physical constraints. The effects of various shapes of nanoparticles are drawn and discussed.

Medical Image Security Using Dual Encryption with Oppositional Based Optimization Algorithm.

Abstract: Security is the most critical issue amid transmission of medical images because it contains sensitive information of patients. Medical image security is an essential method for secure the sensitive data when computerized images and their relevant patient data are transmitted across public networks. In this paper, the dual encryption procedure is utilized to encrypt the medical images. Initially Blowfish Encryption is considered and then signcryption algorithm is utilized to confirm the encryption model. After that, the Opposition based Flower Pollination (OFP) is utilized to upgrade the private and public keys. The performance of the proposed strategy is evaluated using performance measures such as Peak Signal to Noise Ratio (PSNR), entropy, Mean Square Error (MSE), and Correlation Coefficient (CC).

Eye-Tracking Measures in Aviation: A Selective Literature Review

Abstract: Objective: The aim of this article is to present a comprehensive review of eye-tracking measures and discuss different application areas of the method of eye tracking in the field of aviation.Backg...

Electrochemical synthesis, photodegradation and antibacterial properties of PEG capped zinc oxide nanoparticles

Abstract: The effect of surfactant and dopant on the properties of zinc oxide nanoparticles were studied by preparing polyethylene glycol (PEG) capped ZnO and tungsten doped PEG capped ZnO nanoparticles via the electrochemical method. These nanoparticles were characterized using X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Ultraviolet Diffuse Reflection Spectroscopy (UV-DRS), Scanning Electron Microscopy (SEM) and Electron Dispersive Analysis of X Rays (EDAX). The photocatalytic degradation of malachite green dye using these nanoparticles was studied under visible light. The effects of various reaction parameters like dye concentration, catalyst concentration, pH and time were studied to optimize the photodegradation reaction. Reusability of these nanoparticles was studied and no significant change was observed in the degradation efficiency of PEG capped ZnO till the fourth cycle, while there was a gradual decrease in the degradation efficiency of tungsten doped PEG capped ZnO. Langmuir- Hinshelwood kinetic model well describes the photodegradation capacity and the degradation of malachite green follows pseudo-first order kinetics.Photocatalytic studies reveal that PEG capping increases the degradation properties of ZnO while tungsten doping decreases the extent of PEG capping and has a detrimental effect on the degradation properties of ZnO. The prepared nanoparticles exhibit significant antibacterial properties against gram-positive Bacillus cereus and gram-negative Escherichia coli bacterial strains by agar well diffusion method.

Ryu controller's scalability experiment on software defined networks

Abstract: Software defined networks is the future of Computer networks which claims that traditional networks are getting replaced by SDN. Considering the number of nodes everyday connecting to the global village of internet, it becomes inevitable to adapt to any new technology before testing its scalability in presence of dynamic circumstances. While a lot of research is going on to provide solution as SDN to overcome the limitations of the traditional network, it gives a call to research community to test the applicability and caliber to withstand the fault tolerance of the provided solution in the form of SDN Controllers. Out of the existing multiple controllers providing the SDN functionalities to the network, one of the basic controllers is Ryu Controller. This paper is a contribution towards performance evaluation of scalability of the Ryu Controller by implementing multiple scenarios experimented on the simulation tool of Mininet, Ryu Controller and iPerf. Ryu Controller is tested in the simulation environment by observing throughput of the controller and checked its performance in dynamic networking conditions over Mesh topology by exponentially increasing the number of nodes until it supported tested on high end devices.

Thermal Marangoni convection in two-phase flow of dusty Casson fluid

Abstract: This paper deals with the thermal Marangoni convection effects in magneto-Casson liquid flow through suspension of dust particles. The transpiration cooling aspect is accounted. The surface tension is assumed to be fluctuating linearly with temperature. The fluid and dust particle’s temperature of the interface is chosen as a quadratic function of interface arc length. The governing problem is modelled by conservation laws of mass, momentum and energy for fluid and dust particle phase. Stretching transformation technique is utilized to form ordinary differential equations from the partial differential equations. Later, the numerical solutions based on Runge-Kutta-Fehlberg method are established. The momentum and heat transport distributions are focused on the outcome of distinct governing parameters. The results of Nusselt number is also presented and discussed. It is established that the heat transfer rate is higher in the case of dusty non-Newtonian fluid than dusty Newtonian fluid. The rate of heat transfer can be enhanced by suspending dust particles in a base liquid.

Marangoni convection in Casson liquid flow due to an infinite disk with exponential space dependent heat source and cross-diffusion effects

Abstract: Present work aims to investigate the features of the exponential space dependent heat source (ESHS) and cross-diffusion effects in Marangoni convective heat mass transfer flow due to an infinite disk. Flow analysis is comprised with magnetohydrodynamics (MHD). The effects of Joule heating, viscous dissipation and solar radiation are also utilized. The thermal and solute field on the disk surface varies in a quadratic manner. The ordinary differential equations have been obtained by utilizing Von Karman transformations. The resulting problem under consideration is solved numerically via Runge-Kutta-Fehlberg based shooting scheme. The effects of involved pertinent flow parameters are explored by graphical illustrations. Results point out that the ESHS effect dominates thermal dependent heat source effect on thermal boundary layer growth. The concentration and temperature distributions and their associated layer thicknesses are enhanced by Marangoni effect.

Properties and occurrence rates of $Kepler$ exoplanet candidates as a function of host star metallicity from the DR25 catalog

Abstract: Correlations between the occurrence rate of exoplanets and their host star properties provide important clues about the planet formation processes. We studied the dependence of the observed properties of exoplanets (radius, mass, and orbital period) as a function of their host star metallicity. We analyzed the planetary radii and orbital periods of over 2800 $Kepler$ candidates from the latest $Kepler$ data release DR25 (Q1-Q17) with revised planetary radii based on $Gaia$~DR2 as a function of host star metallicity (from the Q1-Q17 (DR25) stellar and planet catalog). With a much larger sample and improved radius measurements, we are able to reconfirm previous results in the literature. We show that the average metallicity of the host star increases as the radius of the planet increases. We demonstrate this by first calculating the average host star metallicity for different radius bins and then supplementing these results by calculating the occurrence rate as a function of planetary radius and host star metallicity. We find a similar trend between host star metallicity and planet mass: the average host star metallicity increases with increasing planet mass. This trend, however, reverses for masses $> 4.0\, M_\mathrm{J}$: host star metallicity drops with increasing planetary mass. We further examined the correlation between the host star metallicity and the orbital period of the planet. We find that for planets with orbital periods less than 10 days, the average metallicity of the host star is higher than that for planets with periods greater than 10 days.

Nonlinear optical studies of sodium borate glasses embedded with gold nanoparticles

Abstract: Optical glasses possessing large third-order optical nonlinear susceptibility and fast response times are promising materials for the development of advanced nonlinear photonic devices. In this context, gold nanoparticle (NP)-doped borate glasses were synthesized via the melt-quench method. The nonlinear optical (NLO) properties of thus prepared glasses were investigated at different wavelengths (i.e., at 532 nm using nanosecond pulses, at 750 nm, 800 nm, and 850 nm wavelengths using femtosecond, MHz pulses). At 532 nm, open aperture (OA) Z-scan signatures of gold NP-doped borate glasses demonstrated reverse saturable absorption (RSA), attributed to mixed intra-band and interband transitions, while in the 750‒850 nm region, the OA Z-scan data revealed the presence of saturable absorption (SA), possibly due to intra-band transitions. The NLO coefficients were evaluated at all the spectral regions and further compared with some of the recently reported glasses. The magnitudes of obtained NLO coefficients clearly demonstrate that the investigated glasses are potential materials for photonic device applications.

Scrutinization of thermal radiation, viscous dissipation and Joule heating effects on Marangoni convective two-phase flow of Casson fluid with fluid-particle suspension

Abstract: The impact of Marangoni convection on dusty Casson fluid boundary layer flow with Joule heating and viscous dissipation aspects is addressed. The surface tension is assumed to vary linearly with temperature. Physical aspects of magnetohydrodynamics and thermal radiation are also accounted. The governing problem is modelled under boundary layer approximations for fluid phase and dust particle phase and then Runge-Kutta-Fehlberg method based numeric solutions are established. The momentum and heat transport mechanisms are focused on the result of distinct governing parameters. The Nusselt number is also calculated. It is established that the rate of heat transfer can be enhanced by suspending dust particles in the base fluid. The temperature field of fluid phase and temperature of dust phase are quite reverse for thermal dust parameter. The radiative heat, viscous dissipation and Joule heating aspects are constructive for thermal fields of fluid and dust phases. The velocity of dusty Casson fluid dominates the velocity of dusty fluid while this trend is opposite in the case of temperature. Moreover qualitative behaviour of fluid phase and dust phase temperature/velocity are similar.

Nonlinear Gravitational and Radiation Aspects in Nanoliquid with Exponential Space Dependent Heat Source and Variable Viscosity

Abstract: The nonlinear convective flow of kerosene-Alumina nanoliquid subjected to an exponential space dependent heat source and temperature dependent viscosity is investigated here. This study is focuses on augmentation of heat transport rate in liquid propellant rocket engine. The kerosene-Alumina nanoliquid is considered as the regenerative coolant. Aspects of radiation and viscous dissipation are also covered. Relevant nonlinear system is solved numerically via RK based shooting scheme. Diverse flow fields are computed and examined for distinct governing variables. We figured out that the nanoliquid’s temperature increased due to space dependent heat source and radiation aspects. The heat transfer rate is higher in case of changeable viscosity than constant viscosity.

The Relationship of Workplace Flexibility to Employee Engagement among Information Technology Employees in India

Abstract: Historically, organizations have been provisioning flexible work arrangement (FWA) options in the workplace to help employees achieve a balance between work obligations and private obligations. We ...

Serverless Architecture - A Revolution in Cloud Computing

Abstract: Emergence of cloud computing as the inevitable IT computing paradigm, the perception of the compute reference model and building of services has evolved into new dimensions. Serverless computing is an execution model in which the cloud service provider dynamically manages the allocation of compute resources of the server. The consumer is billed for the actual volume of resources consumed by them, instead paying for the pre-purchased units of compute capacity. This model evolved as a way to achieve optimum cost, minimum configuration overheads, and increases the application’s ability to scale in the cloud. The prospective of the serverless compute model is well conceived by the major cloud service providers and reflected in the adoption of serverless computing paradigm. This review paper presents a comprehensive study on serverless computing architecture and also extends an experimentation of the working principle of serverless computing reference model adapted by AWS Lambda. The various research avenues in serverless computing are identified and presented.

Online Website Cues Influencing the Purchase Intention of Generation Z Mediated by Trust

Abstract: The apparel industry has repeatedly faced the problem of the return of products due to the intangibility factor. This intangibility of feel and touch of the product has constantly been attributed to the trust factor. This research endeavor tries to study the influence of online website cues such as Product presentation and Perceived interactivity) whether they have a decisive impact on the purchase intention of generation Z mediated by the trust factor. The paper examines trust as a mediating factor from the gaps of previous literature who fail to consider trust in the light of a consumer behavior perspective, as trust is a vital factor under the given conditions of risk and uncertainty. Online shopping is an activity which involves primary interaction with computers and customers, which acts similar to the concept of having a salesman in a traditional store that influences the purchase intention. Therefore trust needs to acts as the salient salesman in the web world. In the current study, a web-based survey was administered to 2000 sample size equally distributed to male and female respondents who fall into the Generation z classification.Structural equation modeling was performed to analyze the data. Results confirmed that all the necessary cues considered for the study from extensive review have a substantial impact on purchase intention mediated by trust. Therefore, Marketers and decision makers of the online apparel website must cater to the contents of the website as these are important cues which influence the purchase intention of Generation Z.

Quadratic convective flow of radiated nano-Jeffrey liquid subject to multiple convective conditions and Cattaneo-Christov double diffusion

Abstract: A nonlinear flow of Jeffrey liquid with Cattaneo-Christov heat flux is investigated in the presence of nanoparticles. The features of thermophoretic and Brownian movement are retained. The effects of nonlinear radiation, magnetohydrodynamic (MHD), and convective conditions are accounted. The conversion of governing equations into ordinary differential equations is prepared via stretching transformations. The consequent equations are solved using the Runge-Kutta-Fehlberg (RKF) method. Impacts of physical constraints on the liquid velocity, the temperature, and the nanoparticle volume fraction are analyzed through graphical illustrations. It is established that the velocity of the liquid and its associated boundary layer width increase with the mixed convection parameter and the Deborah number.

Tailoring of low grade coal to fluorescent nanocarbon structures and their potential as a glucose sensor.

Abstract: Lignite is an abundantly utilized feedstock for the facile synthesis of fluorescent carbon dots and carbon nanomaterials. Its value is appreciated as an energy source for combustion for long time. Herein we report a novel top-down strategy to synthesis lignite based fluorescent nano carbon structures by combined acidic oxidation and chemical reflux. The nanocarbon crystallites in lignite are converted to oxygenated nano carbon dots and graphene sheets. They exhibited stable fluorescence property in the visible region depending on their size, functionalities and defects which were highly stable in all the pH conditions. These nanocarbon structures are an effective probe for fluorescent sensing of label-free and selective detection of glucose ions with detection limit as low as 0.125 mM, promising real-world sensor applications. These findings establish a scalable method for the production of fluorescent carbon based glucose sensor from lignite.

Determination of the size of the dust torus in H0507+164 through optical and infrared monitoring

Abstract: The time delay between flux variations in different wavelength bands can be used to probe the inner regions of active galactic nuclei (AGN). Here, we present the first measurements of the time delay between optical and near-infrared (NIR) flux variations in H0507+164, a nearby Seyfert 1.5 galaxy at z = 0.018. The observations in the optical V -band and NIR J, H and Ks bands carried over 35 epochs during the period October 2016 to April 2017 were used to estimate the inner radius of the dusty torus. From a careful reduction and analysis of the data using cross-correlation techniques, we found delayed responses of the J, H and Ks light curves to the V -band light curve. In the rest frame of the source, the lags between optical and NIR bands are found to be $27.1^{+13.5}_{-12.0}$ days (V vs. J), $30.4^{+13.9}_{-12.0}$ days (V vs. H) and $34.6^{+12.1}_{-9.6}$ days (V vs. K ). The lags between the optical and different NIR bands are thus consistent with each other. The measured lags indicate that the inner edge of dust torus is located at a distance of 0.029 pc from the central UV/optical AGN continuum. This is larger than the radius of the broad line region of this object determined from spectroscopic monitoring observations thereby supporting the unification model of AGN. The location of H0507+164 in the {\tau} - MV plane indicates that our results are in excellent agreement with the now known lag-luminosity scaling relationship for dust in AGN.

Significance of Buoyancy, Velocity Index and Thickness of an Upper Horizontal Surface of a Paraboloid of Revolution: The Case of Non-Newtonian Carreau Fluid

Abstract: The problem of fluid flow on air-jet weaving machine (i.e. mechanical engineering and chemical engineering) is deliberated upon in this report using the case of non-Newtonian Carreau fluid flow. In this report, the boundary layer flow of the fluid over an upper horizontal surface of a paraboloid of revolution is presented. The dimensional governing equations were non-dimensionalized, parameterized, solved numerically and discussed. Maximum horizontal velocity is ascertained at smaller values of thickness parameter, a larger value of buoyancy related parameter and the flow is characterized as shear-thickening. Local skin friction coefficient is an increasing and a decreasing property of Deborah number for Shear thinning and Shear-thickening cases of the flow respectively. The velocity of the flow parallel to the surface (uhspr) is a decreasing property of thickness parameter and increasing function of velocity index parameter.

Poly(aniline) Decorated with Nanocactus Platinum on Carbon Fiber Paper and Its Electrocatalytic Behavior toward Toluene Oxidation

Abstract: Electrochemically deposited polymeric film of polyaniline (PANI) is used as a substrate for electrochemical deposition of platinum by using cyclic voltammetry. The electrochemical properties of multi-layered films were analyzed by cyclic voltammetry and AC impedance spectroscopy. The structural properties of multi-layered polymer films were analyzed by SEM, TEM, XRD, XPS, Raman and FTIR. The modified electrode showed strong electrocatalytic activity toward oxidation of toluene in presence of NaNO2/H2SO4 in actetonitrile medium. Toluene gave a sensitive anodic peak at 1.318 V (vs. SCE). Cyclic voltammetry studies suggest that the electrochemical activity of Pt-PANI/CFP electrode is higher than that of Pt/CFP electrode toward toluene oxidation.

On the Motion of Non-Newtonian Eyring–Powell Fluid Conveying Tiny Gold Particles Due to Generalized Surface Slip Velocity and Buoyancy

Abstract: In the painting industry, space science and biomedical science, the nature of relaxation in the flow of non-Newtonian fluid (i.e. blood) containing gold (Ag) suits the characteristics of Eyring–Powell fluid flow induced by generalized surface slip velocity and buoyancy. However, flow of various non-Newtonian fluids on the horizontal surface of a slanted paraboloid of revolution objects (i.e. rocket, as in space science), over a bonnet of a car and over a pointed surface of an aircraft is of importance to experts in all these fields. In this article, the analysis of the motion within the thin layer formed on a horizontal object which is neither a perfect horizontal nor vertical and neither an inclined surface nor a cone/wedge is presented. The transformed governing equations which model the flow was non-dimenzionalized, parameterized and solved numerically using a well-known Runge–Kutta integration procedure along with shooting technique. The influence of increasing the magnitude of major parameters on the temperature distribution, local heat transfer rate, concentration of the fluid, local skin friction coefficient and velocity of the flow are illustrated graphically and discussed. Velocity slip parameter is found to be a decreasing function of temperature distribution across the flow. Heat transfer rate $$(Nu_{x}Re_{x}^{-1/2})$$ at the wall ( $$\xi = 0$$ ) is an increasing function of velocity slip parameter. Maximum coefficient of concentration of homogeneous bulk fluid at the wall exists at larger values of the emerged velocity slip and volume fraction parameters.