Journal ArticleDOI
Effects of eddy currents in transformer windings
P.L. Dowell
- Vol. 113, Iss: 8, pp 1387-1394
TLDR
In this article, the effect of eddy currents on transformer windings is considered and a method is derived for calculating the variation of winding resistance and leakage inductance with frequency for transformers with single-layer, multilayer and sectionalised windings.Abstract:
The effects of eddy currents in transformer windings are considered, and a method is derived for calculating the variation of winding resistance and leakage inductance with frequency for transformers with single-layer, multilayer and sectionalised windings. The method consists in dividing the winding into portions, calculating the d.c. resistances and d.c. leakage inductances of each of these portions, and then multiplying the d.c. values by appropriate factors to obtain the corresponding a.c. values. These a.c. values are then referred to, say, the primary winding and summed to give the total winding resistance and leakage inductance of the transformer. Formulas are derived and quoted for calculating the d.c. resistances and leakage inductances of the winding portions. Theoretical expressions are derived for the variation with frequency etc. of the factors by which the d.c. values must be multiplied to obtain the corresponding a.c. values. These expressions are presented in the form of graphs, permitting the factors to be read as required.read more
Citations
More filters
Proceedings ArticleDOI
Design procedure for inductors-on-silicon in power supply on chip applications
TL;DR: In this paper, a method for designing inductors-on-silicon based on a given DC-DC converter specification is presented, with the goal of integrating passive and active components on a single silicon die to reduce power supply size.
Proceedings ArticleDOI
A Novel Method to Calculate the Efficiency of a Wireless Power Transfer System Using Modified Ferreira’s/Dowell’s Method
TL;DR: A modified Ferreira's method to calculate the AC resistance of WPTS coils and a novel method to calculated the efficiency of a WPTS at any operational frequency considering higher order harmonics are proposed.
Proceedings ArticleDOI
Modeling and Integrating Losses of Magnetic Components Into Time-Domain Electric Circuit Simulations
TL;DR: In this paper, the authors present a verified way to calculate semiconductor, magnetic core, and winding losses in a common simulation environment, based on electrical and core specifications of a 100 kW, 10 kHz realized medium frequency transformer prototype.
Dissertation
High performance DC-AC conversion techniques for the more electric aircraft
TL;DR: In this article, the authors identify the semiconductor losses and the weight of the AC filter as two key design aspects that significantly affect the power density of DC-AC converters.
References
More filters
Journal ArticleDOI
Effective resistance to alternating currents of multilayer windings
Edward Bennett,Sidney C. Larson +1 more
TL;DR: In this article, a multilayer winding carrying an alternating current, such as the windings illustrated in figures 1, 2, and 3, each layer of copper lies in the alternating magnetic field set up by the current in all the other layers.
Journal ArticleDOI
Eddy Currents in Large Slot-Wound Conductors
TL;DR: In this article, the authors discuss the more important causes of eddy currents in heavy conductors carrying alternating currents and surrounded on three sides by iron, and propose a method to identify the most important causes.
Journal ArticleDOI
Effective Resistance to Alternating Currents of Multilayer Windings
Journal ArticleDOI
Eddy-Current Losses in Cylindrical Conductors, with Special Applications to the Alternating Current Resistances of Short Coils
TL;DR: In this article, it is shown that a considerable proportion of the effective resistance of inductive coils when used at radio frequencies is caused by the eddy-currents set up in the wires of the coils by the alternating magnetic field in which they are situated, and that in extreme cases the alternating current resistance may amount to more than one hundred times the direct current resistance.
Journal ArticleDOI
Heat Losses in the Conductors of Alternating-Current Machines
TL;DR: In this article, the authors show how hyperbolic functions of complex angles may be applied to the solution of the problem of heat losses in rectangular conductors that are embedded in open slots.