Journal ArticleDOI
Fatigue life prediction for stainless steel welded plate CCT geometry based on Lawrence's local-stress approach
TLDR
In this article, the effect of welding process and procedure on fatigue crack initiation from notches and fatigue crack propagation in AISI 304L stainless steel welds was experimentally investigated.About:
This article is published in Engineering Failure Analysis.The article was published on 2003-12-01. It has received 8 citations till now. The article focuses on the topics: Crack closure & Paris' law.read more
Citations
More filters
Journal ArticleDOI
Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
TL;DR: In this article, the microstructure and mechanical properties of AISI 304 stainless steel and low alloy steel joints by Gas Tungsten Arc Welding, Electron Beam Welding (EBW), and Friction Welding were investigated.
Journal ArticleDOI
Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding
TL;DR: In this article, the weldability of AISI 304 austenitic stainless steel to AisI 4340 steel joined by friction welding in different rotational speeds and fatigue behaviour of friction-welded samples were investigated.
Journal ArticleDOI
Hot Corrosion Behavior of Friction Welded AISI 4140 and AISI 304 in K2SO–60% NaCl Mixture
N. Arivazhagan,Senthilkumaran Kumaraguru,S. Narayanan,K. Devendranath Ramkumar,S. Surendra,Satya Prakash +5 more
TL;DR: In this article, the influence of welding parameters and exposure on the hot corrosion behavior of the weldment were discussed, and it was observed that the weld interface was more susceptible to degradation than base metals due to inter diffusion of element across the interface and formation of intermetallic compound.
Journal ArticleDOI
Mechanical properties of SPCC low carbon steel joints prepared by metal inert gas welding
Mitsuhiro Okayasu,Yuki Ohkura,Tatsuaki Sakamoto,Shuhei Takeuchi,Hiroaki Ohfuji,Tetsuro Shiraishi +5 more
TL;DR: In this article, the tensile and fatigue properties of SPCC steels welded by metal inert gas welding were investigated in several localized regions, e.g., weld metal, heat affected zone (HAZ), and base metal.
Journal ArticleDOI
Effect of welding methods for different carbon content of ss304 and ss304l materials on the mechanical properties and microstructure
TL;DR: In this article, three different welding methods including TIG (Tungsten inert gas), SMAW (Shielded Metal Arc Welding), and MIG (Metal Inert Gas) are described to compare mechanical properties and morphological analysis.
References
More filters
Journal ArticleDOI
Effect of reheating on microstructure and toughness of C–Mn weld metal
J. H. Tweed,J. F. Knott +1 more
TL;DR: In this article, a model for brittle failure in C-mn weld metal involving initial plasticity in grain boundary ferrite and crack initiation at nonmetallic inclusions was proposed, which can be qualitatively understood in terms of the model.
Journal ArticleDOI
Analytical and graphical aids for the fatigue design of weldments
J.-Y. Yung,F.V. Lawrence +1 more
TL;DR: In this paper, a simple version of a more elaborate analytical model of the fatigue behavior of weldments is presented, which provides analytical and graphical design aids for design, as well as a detailed analysis of the fracture initiation and growth of the notch-root material.
Related Papers (5)
Influence of Residual Stress on the Predicted Fatigue Life of Weldments
F.V. Lawrence,JD Burk,J-Y Yung +2 more