Journal ArticleDOI
Mechanically alloyed nanocomposites
Reads0
Chats0
TLDR
In this paper, a review of recent advances in the synthesis and properties of nanocomposites obtained by mechanical alloying has been presented, including metal-based and ceramic-based composites.About:
This article is published in Progress in Materials Science.The article was published on 2013-05-01. It has received 605 citations till now. The article focuses on the topics: Precipitation hardening & Ceramic.read more
Citations
More filters
Journal ArticleDOI
Dynamic restoration and crystallographic texture of a friction-stir processed Al–Mg–SiC surface nanocomposite
TL;DR: In this article, SiC nanoparticles are homogenously incorporated within an Al-Mg alloy metal matrix during multi-step friction-stir processing (FSP) to fabricate an Almatrix surface.
Journal ArticleDOI
Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites
TL;DR: In this paper, the effect of microwave sintering on mechanical properties and electrical conductivity over vacuum and conventional Sintering carried out at 900°C was investigated and compared.
Journal ArticleDOI
In-situ fabrication of nano-sized TiO2 reinforced Cu matrix composites with well-balanced mechanical properties and electrical conductivity
Tielong Han,Jiajun Li,Naiqin Zhao,Chunsheng Shi,Enzuo Liu,Fang He,Ma Liying,Li Qunying,Chunnian He +8 more
TL;DR: In this article, a facile in-situ method was proposed for the fabrication of Cu matrix composites reinforced with rutile-TiO 2 nanoparticles, which involved a molecular-level mixing process and subsequent vacuum hot-pressing sintering of the as-obtained composite powders, leading to dense bulk composites with homogeneously distributed TiO 2 particles.
Journal ArticleDOI
A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles
Q. Yang,Yu Ma,Yu Ma,Zhijiu Chen,Gang Ji,Mingliang Wang,Shengyi Zhong,Yurong Wu,Vincent Ji,Huiying Wang +9 more
TL;DR: In this paper, a new powder metallurgy routine was proposed to fabricate TiB2/Al-Zn-Mg-Cu nanocomposites with a uniform dispersion of nano-TiB2 based on novel designed composite powders with pre-embedded nanoparticles (CPEPs).
Journal ArticleDOI
Massive Ag migration through metal/ceramic nano-multilayers: an interplay between temperature, stress-relaxation and oxygen-enhanced mass transport
Mirco Chiodi,Claudia Cancellieri,Frank Moszner,Mariusz Andrzejczuk,Jolanta Janczak-Rusch,Lars P. H. Jeurgens +5 more
TL;DR: In this paper, the phase stability and microstructural evolution of nano-multilayer (NML) coatings during thermal treatments have attracted increasing attention in several technological fields, such as plasmonics, optics and joining.
References
More filters
Journal ArticleDOI
Helical microtubules of graphitic carbon
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Book
Binary alloy phase diagrams
TL;DR: Binary Alloy Phase Diagrams, Second Edition, Plus Updates, on CD-ROM offers you the same high-quality, reliable data you'll find in the 3-volume print set published by ASM in 1990.
Journal ArticleDOI
Hydrogen-storage materials for mobile applications
TL;DR: Recent developments in the search for innovative materials with high hydrogen-storage capacity are presented.
Book ChapterDOI
Introduction To Composite Materials
TL;DR: The combination of materials to form a new material system with enhanced material properties is a well documented historical fact as discussed by the authors, which is why many artisans from the Mediterranean and Far East used a form of composite technology in molding art works which were fabricated by layering cut paper in various sizes for producing desired shapes and contours.
Book
Mechanical Alloying And Milling
TL;DR: Mechanical Alloying (MA) is a solid-state powder processng technique involving repeated welding, fracturing, and rewelding of powder particles in a high-energy ball mill as mentioned in this paper.
Related Papers (5)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z. Zhang,Daolun Chen +1 more