Journal ArticleDOI
Mechanically alloyed nanocomposites
Reads0
Chats0
TLDR
In this paper, a review of recent advances in the synthesis and properties of nanocomposites obtained by mechanical alloying has been presented, including metal-based and ceramic-based composites.About:
This article is published in Progress in Materials Science.The article was published on 2013-05-01. It has received 605 citations till now. The article focuses on the topics: Precipitation hardening & Ceramic.read more
Citations
More filters
Journal ArticleDOI
Effect of sintering parameters on microstructure, mechanical properties and electrochemical behavior of Nb-Zr alloy for biomedical applications
TL;DR: In this paper, a nano/sub-micron grain structured Nb-Zr alloy with an average grain size of between 100 and 300nm was produced using the mechanical alloying (MA) and spark-plasma sintering (SPS).
Journal ArticleDOI
Microstructure and mechanical properties of aluminium-graphene composite powders produced by mechanical milling
TL;DR: In this article, Graphene nanosheets (GNSs) have been incorporated into an aluminium matrix composite using mechanical milling and hot pressing in the current study, which shows that aluminium particles are firstly flattened into flakes, and then fractured/rewelded into equiaxed particles as the ball milling progresses.
Journal ArticleDOI
Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes
TL;DR: In this article, the composite behavior of an Al 6061 nanocrystalline matrix reinforced with different weight percentages (0, 0.5, 1.5 and 2.0) with a milling time of 30h was investigated.
Book ChapterDOI
Processing and Deformation Characteristics of Metals Reinforced with Ceramic Nanoparticles
Sie Chin Tjong,Sie Chin Tjong +1 more
TL;DR: In this article, the structural and tensile properties of MMNCs fabricated by liquid-and solid-state processing routes are discussed in detail, and they comprehensively focus on the structural-mechanical property relationship of the MMNC.
Journal ArticleDOI
Influence of hard inclusions on microstructural characteristics and textural components during dissimilar friction-stir welding of an PM Al–Al2O3–SiC hybrid nanocomposite with AA1050 alloy
Farzad Khodabakhshi,Abdolreza Simchi,Amir Hossein Kokabi,Adrian P. Gerlich,Martin Nosko,Peter Švec +5 more
TL;DR: In this article, microstructural evolutions and texture development during dissimilar friction stir welding (DFSW) of an Al-matrix hybrid nanocomposite with AA1050 was presented.
References
More filters
Journal ArticleDOI
Helical microtubules of graphitic carbon
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Book
Binary alloy phase diagrams
TL;DR: Binary Alloy Phase Diagrams, Second Edition, Plus Updates, on CD-ROM offers you the same high-quality, reliable data you'll find in the 3-volume print set published by ASM in 1990.
Journal ArticleDOI
Hydrogen-storage materials for mobile applications
TL;DR: Recent developments in the search for innovative materials with high hydrogen-storage capacity are presented.
Book ChapterDOI
Introduction To Composite Materials
TL;DR: The combination of materials to form a new material system with enhanced material properties is a well documented historical fact as discussed by the authors, which is why many artisans from the Mediterranean and Far East used a form of composite technology in molding art works which were fabricated by layering cut paper in various sizes for producing desired shapes and contours.
Book
Mechanical Alloying And Milling
TL;DR: Mechanical Alloying (MA) is a solid-state powder processng technique involving repeated welding, fracturing, and rewelding of powder particles in a high-energy ball mill as mentioned in this paper.
Related Papers (5)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z. Zhang,Daolun Chen +1 more