Journal ArticleDOI
Mechanically alloyed nanocomposites
Reads0
Chats0
TLDR
In this paper, a review of recent advances in the synthesis and properties of nanocomposites obtained by mechanical alloying has been presented, including metal-based and ceramic-based composites.About:
This article is published in Progress in Materials Science.The article was published on 2013-05-01. It has received 605 citations till now. The article focuses on the topics: Precipitation hardening & Ceramic.read more
Citations
More filters
Journal ArticleDOI
Structural analysis of calcium reactive hydride composite for solid state hydrogen storage
Fahim Karimi,P. Klaus Pranzas,Armin Hoell,Ulla Vainio,Edmund Welter,Vikram Singh Raghuwanshi,Claudio Pistidda,Martin Dornheim,Thomas Klassen,Andreas Schreyer +9 more
TL;DR: In this paper, a structural investigation of the above mentioned sets of samples by means of volumetric measurements, anomalous small-angle X-ray scattering (ASAXS) and Xray absorption spectroscopy (XAS) is reported.
Journal ArticleDOI
Synthesis and characterization of Sn reinforced Al-Cu-Fe quasicrystalline matrix nanocomposite by mechanical milling
Yagnesh Shadangi,Vikas Shivam,Manish Kumar Singh,Kausik Chattopadhyay,Joysurya Basu,Nilay Krishna Mukhopadhyay +5 more
TL;DR: The influence of mechanical milling on microstructure and phase evolution in Al62.5Cu25Fe12.5 (at%) quasicrystalline (IQC) matrix reinforced with varying volume fraction of Sn has been investigated by means of X-ray diffraction (XRD), scanning & transmission electron microscopy (SEM and TEM) and differential scanning calorimetry (DSC) methods as discussed by the authors.
Journal ArticleDOI
Application of ball milling in the synthesis of AA 7075-ZrO2 metal matrix nanocomposite
S. E. Hernández-Martínez,J.J. Cruz-Rivera,C.G. Garay-Reyes,C.G. Elias-Alfaro,Roberto Martínez-Sánchez,J.L. Hernández-Rivera +5 more
TL;DR: Ball milling was used to reduce the particle size of yttria-stabilized ZrO 2 powders with the aim of introducing it into the AA 7075 matrix as discussed by the authors.
Journal ArticleDOI
Fabrication of metal-matrix AL7075T651/TiN nano composite employing friction stir process:
TL;DR: In this paper, the authors investigated a suitable set of friction stir processing parameters to form AL7075T651/TiN nano composite and quantified the effect of these variations on the composite through several microstructural and mechanical tests.
Journal ArticleDOI
Contamination in wet-ball milling
TL;DR: In this paper, a theory that explains the cause of process control agents (PCAs) induced contamination is presented, and an attempt is made through reviewing the literature to reason why there is ignorance.
References
More filters
Journal ArticleDOI
Helical microtubules of graphitic carbon
TL;DR: Iijima et al. as mentioned in this paper reported the preparation of a new type of finite carbon structure consisting of needle-like tubes, which were produced using an arc-discharge evaporation method similar to that used for fullerene synthesis.
Book
Binary alloy phase diagrams
TL;DR: Binary Alloy Phase Diagrams, Second Edition, Plus Updates, on CD-ROM offers you the same high-quality, reliable data you'll find in the 3-volume print set published by ASM in 1990.
Journal ArticleDOI
Hydrogen-storage materials for mobile applications
TL;DR: Recent developments in the search for innovative materials with high hydrogen-storage capacity are presented.
Book ChapterDOI
Introduction To Composite Materials
TL;DR: The combination of materials to form a new material system with enhanced material properties is a well documented historical fact as discussed by the authors, which is why many artisans from the Mediterranean and Far East used a form of composite technology in molding art works which were fabricated by layering cut paper in various sizes for producing desired shapes and contours.
Book
Mechanical Alloying And Milling
TL;DR: Mechanical Alloying (MA) is a solid-state powder processng technique involving repeated welding, fracturing, and rewelding of powder particles in a high-energy ball mill as mentioned in this paper.
Related Papers (5)
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
Z. Zhang,Daolun Chen +1 more