scispace - formally typeset
Journal ArticleDOI

White light-emitting diodes using blue and yellow–orange-emitting phosphors

TLDR
In this article, a blue-emitting phosphor, BaMgAl10O17:Eu2+ (BAM) and a yellow-orange phosphor Ba2+-codoped Sr3SiO5: Eu2+) were prepared by the solid-state reaction.
About
This article is published in Optik.The article was published on 2010-09-01. It has received 40 citations till now. The article focuses on the topics: Chromaticity & Color temperature.

read more

Citations
More filters
Journal ArticleDOI

A review on the advancements in phosphor-converted light emitting diodes (pc-LEDs): Phosphor synthesis, device fabrication and characterization

TL;DR: The role of phosphors in the advancement of light-emitting diodes (LEDs) has been discussed in this paper, where a thorough discussion about the various methods employed for the synthesis of the phosphors and the materials involved in the fabrication of PC-LEDs are discussed.
Journal ArticleDOI

Perovskite White Light Emitting Diodes: Progress, Challenges, and Opportunities.

TL;DR: In this article, low-carbon and energy-saving lighting technology has attracted great attention worldwide, as global warming, energy shortages, and environment pollution have intensified, low carbon and energy saving lighting technology attracted great interest worldwide.
Journal ArticleDOI

Photoluminescence and Cathodoluminescence Properties of Nanocrystalline Ca2Gd8Si6O26: Sm3+ Phosphors

TL;DR: In this article, Nanocrystalline Ca2Gd8Si6O26 (CGS) phosphors were synthesized by solvothermal reaction method and the structural and morphological properties of the samples were evaluated by X-ray diffraction and scanning electron microscopy.
Journal ArticleDOI

White light emission from Eu3+ co-activated Ca2Gd8Si6O26:Dy3+ nanophosphors by solvothermalsynthesis

TL;DR: In this article, the energy transfer between Eu3+ and Dy3+ ions was investigated by photoluminescence excitation and emission properties, and the results showed that the increased energy transfer compensated the red emission component of the Dy-3+ doped CGS nanophosphors.
References
More filters
Journal ArticleDOI

Warm-white-light emitting diode utilizing a single-phase full-color Ba3MgSi2O8:Eu2+,Mn2+ phosphor

TL;DR: In this paper, a fabricated white-light emitting diode using a 400nm-emissive chip with a white light emitting Ba3MgSi2O8:Eu2+, Mn2+ phosphor shows warm white light and higher color stability against input power in comparison with a commercial GaN-pumped (Y1−xGdx)3(Al1−yGay)5O12:Ce3+osphor.
Journal ArticleDOI

High-power phosphor-converted light-emitting diodes based on III-Nitrides

TL;DR: In this article, the authors proposed a solution for the phosphor conversion of light-emitting diode light for white light sources and some monochrome applications, which takes into account specific issues if aimed at high power output.
Journal ArticleDOI

On BaMgAl10O17:Eu2+ phosphor degradation mechanism: thermal treatment effects

TL;DR: In this paper, a model of the degradation process of PPDP phosphor during panel fabrication and during panel life is presented. But the degradation mechanism is not yet fully clarified, and the degradation is due to three different mechanisms: the adsorption of an oxygen atom of the atmosphere into an oxygen vacancy of the surface phosphor, the diffusion of divalent europium ions along the conduction layer of BAM and the transfer of one electron from dopant ions to adsorbed oxygen ions when the divalentEuropium ion are close to adsored oxygen ions
Journal ArticleDOI

Eu2+-activated barium magnesium aluminate phosphor for plasma displays – Phase relation and mechanism of thermal degradation

TL;DR: In this article, the authors described the mechanism of thermal degradation of BAM-Ba-hexaaluminate (0.82BaO·6Al 2 O 3 ) in relation to the phase relation and proposed a novel method to prepare a heat resistant phosphor.
Journal ArticleDOI

n-UV+Blue/Green/Red White Light Emitting Diode Lamps

TL;DR: In this paper, the color temperature, Tc, was approximately 5900 K, the color rendering index, Ra, was about 75, and the CIE color coordinates were x=0.33 and y =0.35 for the "n-UV+blue/green/red" white LED lamps.
Related Papers (5)