Showing papers on "OLED published in 2018"
TL;DR: In this paper, the molecular design, photophysical characteristics and OLEDs composed of small-molecule, dendritic and polymeric TADF emitters are discussed.
Abstract: Thermally activated delayed fluorescence (TADF) emitters, which produce light by harvesting both singlet and triplet excitons without noble metals, are emerging as next-generation organic electroluminescent materials. In the past few years, there have been rapid advances in molecular design criteria, our understanding of the photophysics underlying TADF and the applications of TADF materials as emitters in organic light-emitting diodes (OLEDs). This topic is set to remain at the forefront of research in optoelectronic organic materials for the foreseeable future. In this Review, we focus on state-of-the-art materials design and understanding of the photophysical processes, which are being leveraged to optimize the performance of OLED devices. Notably, we also appraise dendritic and polymeric TADF emitters — macromolecular materials that offer the potential advantages of low cost, solution processable and large-area OLED fabrication. Thermally activated delayed fluorescence (TADF) emitters are promising electroluminescent materials for next-generation organic light-emitting diodes (OLEDs). In this Review, the molecular design, photophysical characteristics and OLEDs composed of small-molecule, dendritic and polymeric TADF emitters are discussed.
921 citations
TL;DR: In this paper, two diboron-based molecules, CzDBA and tBuCzDba, were designed and synthesized for organic light-emitting diodes (OLEDs) based on TADF materials.
Abstract: Organic light-emitting diodes (OLEDs) based on thermally activated delayed fluorescence (TADF) materials are promising for the realization of highly efficient light emitters. However, such devices have so far suffered from efficiency roll-off at high luminance. Here, we report the design and synthesis of two diboron-based molecules, CzDBA and tBuCzDBA, which show excellent TADF properties and yield efficient OLEDs with very low efficiency roll-off. These donor–acceptor–donor (D–A–D) type and rod-like compounds concurrently generate TADF with a photoluminescence quantum yield of ~100% and an 84% horizontal dipole ratio in the thin film. A green OLED based on CzDBA exhibits a high external quantum efficiency of 37.8 ± 0.6%, a current efficiency of 139.6 ± 2.8 cd A−1 and a power efficiency of 121.6 ± 3.1 lm W−1 with an efficiency roll-off of only 0.3% at 1,000 cd m−2. The device has a peak emission wavelength of 528 nm and colour coordinates of the Commission International de l´Eclairage (CIE) of (0.31, 0.61), making it attractive for colour-display applications.
565 citations
TL;DR: In this paper, a facile route to fabricate a built-in haze glass-fabric reinforced siloxane hybrid (GFRH) film having high total transmittance and high haze was reported using the scattering effect induced by refractive index contrast between the glass fabric and the hybrimer.
Abstract: Substrates with high transmittance and high haze are desired for increasing the light outcoupling efficiency of organic light-emitting diodes (OLEDs). However, most of the polymer films used as substrate have high transmittance and low haze. Herein, a facile route to fabricate a built-in haze glass-fabric reinforced siloxane hybrid (GFRH) film having high total transmittance (≈89%) and high haze (≈89%) is reported using the scattering effect induced by refractive index contrast between the glass fabric and the siloxane hybrid (hybrimer). The hybrimer exhibiting large refractive index contrast with the glass fabric is synthesized by removing the phenyl substituents. Besides its optical properties, the hazy GFRH films exhibit smooth surface (Rsq = 0.2 nm), low thermal expansion (13 ppm °C−1), high chemical stability, and dimensional stability. Owing to the outstanding properties of the GFRH film, OLED is successfully fabricated onto the film exhibiting 74% external quantum efficiency enhancement. The hazy GFRH's unique optical properties, excellent thermal stability, outstanding dimensional stability, and the ability to perform as a transparent electrode enable them as a wide ranging substrate for the flexible optoelectronic devices.
398 citations
TL;DR: Efficient action is demonstrated of radical-based OLEDs16, whose emission originates from a spin doublet, rather than a singlet or triplet exciton, whose efficiency limitations imposed by tripleT excitons are circumvented for doublets.
Abstract: Organic light-emitting diodes (OLEDs)1–5, quantum-dot-based LEDs6–10, perovskite-based LEDs11–13 and micro-LEDs14,15 have been championed to fabricate lightweight and flexible units for next-generation displays and active lighting. Although there are already some high-end commercial products based on OLEDs, costs must decrease whilst maintaining high operational efficiencies for the technology to realise wider impact. Here we demonstrate efficient action of radical-based OLEDs16, whose emission originates from a spin doublet, rather than a singlet or triplet exciton. While the emission process is still spin-allowed in these OLEDs, the efficiency limitations imposed by triplet excitons are circumvented for doublets. Using a luminescent radical emitter, we demonstrate an OLED with maximum external quantum efficiency of 27 per cent at a wavelength of 710 nanometres—the highest reported value for deep-red and infrared LEDs. For a standard closed-shell organic semiconductor, holes and electrons occupy the highest occupied and lowest unoccupied molecular orbitals (HOMOs and LUMOs), respectively, and recombine to form singlet or triplet excitons. Radical emitters have a singly occupied molecular orbital (SOMO) in the ground state, giving an overall spin-1/2 doublet. If—as expected on energetic grounds—both electrons and holes occupy this SOMO level, recombination returns the system to the ground state, giving no light emission. However, in our very efficient OLEDs, we achieve selective hole injection into the HOMO and electron injection to the SOMO to form the fluorescent doublet excited state with near-unity internal quantum efficiency. Organic light-emitting devices containing radical emitters can achieve an efficiency of 27 per cent at deep-red and infrared wavelengths based on the excitation of spin doublets, rather than singlet or triplet states.
368 citations
TL;DR: A comprehensive description, at the molecular level, of the fundamental photophysical processes behind TADF emitters is laid out, such as the need to balance the efficiency of thermal activation of triplet excitons into the singlet manifold with theefficiency of radiative transition to the ground state.
Abstract: Since the seminal work of Tang and Vanslyke in 1987 on small-molecule emitters and that of Friend and co-workers in 1990 on conjugated-polymer emitters, organic light-emitting diodes (OLEDs) have attracted much attention from academia as well as industry, as the OLED market is estimated to reach the $30 billion mark by the end of 2018. In these first-generation organic emitters, on the basis of simple spin statistics, electrical excitation resulted in the formation of ∼25% singlet excitons and ∼75% triplet excitons. Radiative decay of the singlet excitons to the singlet ground state leads to a prompt fluorescence emission, while the triplet excitons only lead to weak phosphorescence due to the very small spin-orbit couplings present in purely organic molecules. The consequence is a ca. 75% energy loss, which triggered wide-ranging efforts to try and harvest as many of the triplet excitons as possible. In 1998, Thompson, Forrest, and their co-workers reported second-generation OLED emitters based on coordination complexes with heavy transition metals (e.g., iridium or platinum). Here, the triplet excitons stimulate efficient and fast phosphorescence due to the strong spin-orbit couplings enabled by the heavy-metal atoms. Internal quantum efficiencies (IQE) up to 100% have been reported, which means that for every electron injected into the device, a photon is emitted. While these second-generation emitters are those mainly exploited in current OLED applications, there is strong impetus from both cost and environmental standpoints to find new ways of exploiting purely organic emitters, which in addition can offer greater flexibility to fine-tune the electronic and optical properties by exploiting the synthetic organic chemistry toolbox. In 2012, Adachi and co-workers introduced a promising strategy, based on thermally activated delayed fluorescence (TADF), to harvest the triplet excitons in purely organic molecular materials. These materials now represent the third generation of OLED emitters. Impressive photophysical properties and device performances have been reported, with internal quantum efficiencies also reaching nearly 100%. Our objectives in this Account are threefold: (i) to lay out a comprehensive description, at the molecular level, of the fundamental photophysical processes behind TADF emitters; (ii) to discuss some of the challenges facing the design of TADF emitters, such as the need to balance the efficiency of thermal activation of triplet excitons into the singlet manifold with the efficiency of radiative transition to the ground state; and (iii) to highlight briefly some of the recent molecular-design strategies that pave the way to new classes of TADF materials.
323 citations
TL;DR: Aromatic-imide-based thermally activated delayed fluorescent (TADF) enantiomers were efficiently synthesized by introducing a chiral 1,2-diaminocyclohexane to the achiral TADF unit as mentioned in this paper.
Abstract: Aromatic-imide-based thermally activated delayed fluorescent (TADF) enantiomers, (+)-(S,S)-CAI-Cz and (-)-(R,R)-CAI-Cz, were efficiently synthesized by introducing a chiral 1,2-diaminocyclohexane to the achiral TADF unit. The TADF enantiomers exhibited high PLQYs of up to 98 %, small ΔEST values of 0.06 eV, as well as obvious temperature-dependent transient PL spectra, thus demonstrating their excellent TADF properties. Moreover, the TADF enantiomers showed mirror-image CD and CPL activities. Notably, the CP-OLEDs with CPEL properties based on the TADF enantiomers not only achieved high EQE values of up to 19.7 and 19.8 %, but also displayed opposite CPEL signals with gEL values of -1.7×10-3 and 2.3×10-3 , which represents the first CP-OLEDs, based on the enantiomerically pure TADF materials, having both high efficiencies and intense CPEL.
282 citations
215 citations
TL;DR: In this article, the authors demonstrate perovskite-polymer bulk heterostructure LEDs exhibiting record-high external quantum efficiencies exceeding 20%, and an EL half-life of 46 hours under continuous operation.
Abstract: Perovskite-based optoelectronic devices have gained significant attention due to their remarkable performance and low processing cost, particularly for solar cells. However, for perovskite light-emitting diodes (LEDs), non-radiative charge carrier recombination has limited electroluminescence (EL) efficiency. Here we demonstrate perovskite-polymer bulk heterostructure LEDs exhibiting record-high external quantum efficiencies (EQEs) exceeding 20%, and an EL half-life of 46 hours under continuous operation. This performance is achieved with an emissive layer comprising quasi-2D and 3D perovskites and an insulating polymer. Transient optical spectroscopy reveals that photogenerated excitations at the quasi-2D perovskite component migrate to lower-energy sites within 1 ps. The dominant component of the photoluminescence (PL) is primarily bimolecular and is characteristic of the 3D regions. From PL quantum efficiency and transient kinetics of the emissive layer with/without charge-transport contacts, we find non-radiative recombination pathways to be effectively eliminated. Light outcoupling from planar LEDs, as used in OLED displays, generally limits EQE to 20-30%, and we model our reported EL efficiency of over 20% in the forward direction to indicate the internal quantum efficiency (IQE) to be close to 100%. Together with the low drive voltages needed to achieve useful photon fluxes (2-3 V for 0.1-1 mA/cm2), these results establish that perovskite-based LEDs have significant potential for light-emission applications.
201 citations
184 citations
180 citations
TL;DR: The results prove that DPXZ‐BPPZ is an ideal candidate for red TADF emitters, and the designing approach is valuable for highly efficient red Tadf emitters.
Abstract: A novel thermally activated delayed fluorescence (TADF) emitter 12,15-di(10H-phenoxazin-10-yl)dibenzo[a,c]dipyrido[3,2-h:2',3'-j]phenazine (DPXZ-BPPZ) is developed for a highly efficient red organic light-emitting diode (OLED). With rigid and planar constituent groups and evident steric hindrance between electron-donor (D) and electron-acceptor (A) segments, DPXZ-BPPZ realizes extremely high rigidity to suppress the internal conversion process. Meanwhile, the highly twisted structure between D and A segments will also lead to an extremely small singlet-triplet energy split to DPXZ-BPPZ. Therefore, DPXZ-BPPZ successfully realizes an efficient fluorescent radiation transition and reverse intersystem crossing process, and possesses an extremely high photoluminescence quantum efficiency of 97.1 ± 1.1% under oxygen-free conditions. The OLED based on DPXZ-BPPZ shows red emission with a peak at 612 nm and a Commission Internationale de L'Eclairage (CIE) coordinate of (0.60, 0.40), and it achieves high maximum forward-viewing efficiencies of 20.1 ± 0.2% (external quantum efficiency), 30.2 ± 0.6 cd A-1 (current efficiency), and 30.9 ± 1.3 lm W-1 (power efficiency). The prepared OLED has the best performance among the reported red TADF OLEDs. These results prove that DPXZ-BPPZ is an ideal candidate for red TADF emitters, and the designing approach is valuable for highly efficient red TADF emitters.
TL;DR: A new deep-blue-emitting iridiumcomplex with improved photoluminescence quantum yield is designed and synthesized and the ultrahigh EQE is assigned to a preferred horizontal dipole orientation of the iridium complex in doped film, which is beneficial for light extraction from the OLEDs.
Abstract: Organic light-emitting diodes (OLEDs) based on red and green phosphorescent iridium complexes are successfully commercialized in displays and solid-state lighting. However, blue ones still remain a challenge on account of their relatively dissatisfactory Commission International de L'Eclairage (CIE) coordinates and low efficiency. After analyzing the reported blue iridium complexes in the literature, a new deep-blue-emitting iridium complex with improved photoluminescence quantum yield is designed and synthesized. By rational screening host materials showing high triplet energy level in neat film as well as the OLED architecture to balance electron and hole recombination, highly efficient deep-blue-emission OLEDs with a CIE at (0.15, 0.11) and maximum external quantum efficiency (EQE) up to 22.5% are demonstrated. Based on the transition dipole moment vector measurement with a variable-angle spectroscopic ellipsometry method, the ultrahigh EQE is assigned to a preferred horizontal dipole orientation of the iridium complex in doped film, which is beneficial for light extraction from the OLEDs.
TL;DR: Modified switching device architecture is proposed for efficiently exploiting the high-k dielectric Al2O3 layer, which, when integrated in an active matrix, can drive the ultrathin OLED display even in dynamic folding states.
Abstract: Atomically thin molybdenum disulfide (MoS2) has been extensively investigated in semiconductor electronics but has not been applied in a backplane circuitry of organic light-emitting diode (OLED) display. Its applicability as an active drive element is hampered by the large contact resistance at the metal/MoS2 interface, which hinders the transport of carriers at the dielectric surface, which in turn considerably deteriorates the mobility. Modified switching device architecture is proposed for efficiently exploiting the high-k dielectric Al2O3 layer, which, when integrated in an active matrix, can drive the ultrathin OLED display even in dynamic folding states. The proposed architecture exhibits 28 times increase in mobility compared to a normal back-gated thin-film transistor, and its potential as a wearable display attached to a human wrist is demonstrated.
TL;DR: This review proposed to focus on the recent advances in the molecular design of blue TADF emitters for OLEDs during the last few years, justifying the interest for this new family of materials massively popularized by Chihaya Adachi since 2012.
Abstract: The design of highly emissive and stable blue emitters for organic light emitting diodes (OLEDs) is still a challenge, justifying the intense research activity of the scientific community in this field Recently, a great deal of interest has been devoted to the elaboration of emitters exhibiting a thermally activated delayed fluorescence (TADF) By a specific molecular design consisting into a minimal overlap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) due to a spatial separation of the electron-donating and the electron-releasing parts, luminescent materials exhibiting small S1-T1 energy splitting could be obtained, enabling to thermally upconvert the electrons from the triplet to the singlet excited states by reverse intersystem crossing (RISC) By harvesting both singlet and triplet excitons for light emission, OLEDs competing and sometimes overcoming the performance of phosphorescence-based OLEDs could be fabricated, justifying the interest for this new family of materials massively popularized by Chihaya Adachi since 2012 In this review, we proposed to focus on the recent advances in the molecular design of blue TADF emitters for OLEDs during the last few years
TL;DR: Two deep-blue-emitting homoleptic iridium(III) complexes are reported and OLEDs are demonstrated with CIE coordinates of (0.15, 0.05) and maximum external quantum efficiency of 13.4%, which decreases slightly to 12.5% at 100 cd m-2 .
Abstract: High-efficiency pure blue phosphorescent organic light-emitting diodes (OLEDs) remain one of the grand challenges, principally because the emissive complexes employed either do not possess sufficiently high photoluminescence quantum yields or exhibit unsatisfactory Commission International de l'Eclairage (CIE) coordinates. Here two deep-blue-emitting homoleptic iridium(III) complexes are reported and OLEDs are demonstrated with CIE coordinates of (0.15, 0.05) and maximum external quantum efficiency of 13.4%, which decreases slightly to 12.5% at 100 cd m-2 . They represent examples of the most efficient OLEDs surpassing the CIEy requirement of the National Television System Committee (NTSC) and the European Broadcasting Union (EBU). Emitter orientation contributes to the excellent device performance.
TL;DR: In this paper, the authors proposed to incorporate ultrathin (0.1 nm) green, yellow, and red phosphorescence layers with different sequence arrangements in a blue fluorescence layer, and obtained four unique and simplified fluorescence/phosphorescence (F/P) hybrid, white organic light-emitting diodes (WOLEDs).
Abstract: Abstract By incorporating ultrathin (<0.1 nm) green, yellow, and red phosphorescence layers with different sequence arrangements in a blue fluorescence layer, four unique and simplified fluorescence/phosphorescence (F/P) hybrid, white organic light-emitting diodes (WOLEDs) were obtained. All four devices realize good warm white light emission, with high color rending index (CRI) of >80, low correlated color temperature of <3600 K, and high color stability at a wide voltage range of 5 V–9 V. These hybrid WOLEDs also reveal high forward-viewing external quantum efficiencies (EQE) of 17.82%–19.34%, which are close to the theoretical value of 20%, indicating an almost complete exciton harvesting. In addition, the electroluminescence spectra of the hybrid WOLEDs can be easily improved by only changing the incorporating sequence of the ultrathin phosphorescence layers without device efficiency loss. For example, the hybrid WOLED with an incorporation sequence of ultrathin red/yellow/green phosphorescence layers exhibits an ultra-high CRI of 96 and a high EQE of 19.34%. To the best of our knowledge, this is the first WOLED with good tradeoff among device efficiency, CRI, and color stability. The introduction of ultrathin (<0.1 nm) phosphorescence layers can also greatly reduce the consumption of phosphorescent emitters as well as simplify device structures and fabrication process, thus leading to low cost. Such a finding is very meaningful for the potential commercialization of hybrid WOLEDs.
TL;DR: The most recent and promising trends in the field of phosphorescent platinum complexes will be reviewed and discussed, and the importance of proper molecular design that underpins the successful achievement of improved photophysical features and enhanced device performances will be highlighted.
Abstract: Phosphorescent organometallic compounds based on heavy transition metal complexes (TMCs) are an appealing research topic of enormous current interest. Amongst all different fields in which they found valuable application, development of emitting materials based on TMCs have become crucial for electroluminescent devices such as phosphorescent organic light-emitting diodes (PhOLEDs) and light-emitting electrochemical cells (LEECs). This interest is driven by the fact that luminescent TMCs with long-lived excited state lifetimes are able to efficiently harvest both singlet and triplet electro-generated excitons, thus opening the possibility to achieve theoretically 100% internal quantum efficiency in such devices. In the recent past, various classes of compounds have been reported, possessing a beautiful structural variety that allowed to nicely obtain efficient photo- and electroluminescence with high colour purity in the red, green and blue (RGB) portions of the visible spectrum. In addition, achievement of efficient emission beyond such range towards ultraviolet (UV) and near infrared (NIR) regions was also challenged. By employing TMCs as triplet emitters in OLEDs, remarkably high device performances were demonstrated, with square planar platinum(II) complexes bearing π-conjugated chromophoric ligands playing a key role in such respect. In this contribution, the most recent and promising trends in the field of phosphorescent platinum complexes will be reviewed and discussed. In particular, the importance of proper molecular design that underpins the successful achievement of improved photophysical features and enhanced device performances will be highlighted. Special emphasis will be devoted to those recent systems that have been employed as triplet emitters in efficient PhOLEDs.
TL;DR: This work presents OLEDs that comprise functional layers fabricated as ultrastable glasses, which represent the thermodynamically most favorable and stable molecular conformation achievable nowadays in disordered solids, and suggests a general applicability of this concept to maximize the OLED performance, no matter which specific materials are used.
Abstract: Organic light-emitting diodes (OLEDs) are one of the key solid-state light sources for various applications including small and large displays, automotive lighting, solid-state lighting, and signage. For any given commercial application, OLEDs need to perform at their best, which is judged by their device efficiency and operational stability. We present OLEDs that comprise functional layers fabricated as ultrastable glasses, which represent the thermodynamically most favorable and, thus, stable molecular conformation achievable nowadays in disordered solids. For both external quantum efficiencies and LT70 lifetimes, OLEDs with four different phosphorescent emitters show >15% enhancements over their respective reference devices. The only difference to the latter is the growth condition used for ultrastable glass layers that is optimal at about 85% of the materials' glass transition temperature. These improvements are achieved through neither material refinements nor device architecture optimization, suggesting a general applicability of this concept to maximize the OLED performance, no matter which specific materials are used.
TL;DR: It is shown that the excited-state characteristics of blue thermally activated delayed fluorescence emitters can be precisely controlled by a secondary acceptor having moderate electronic effects on increasing the singlet charge-transfer component and preserving the triplet locally excited- state component.
Abstract: Efficient blue emitters are indispensable for organic light-emitting diodes (OLEDs) with respect to display and lighting applications. Because of their high-energy excited states, both radiation enhancement and non-radiation suppression should be simultaneously optimized to realize 100% exciton utilization. Here, it is shown that the excited-state characteristics of blue thermally activated delayed fluorescence emitters can be precisely controlled by a secondary acceptor having moderate electronic effects on increasing the singlet charge-transfer component and preserving the triplet locally excited-state component. In addition of planar configuration between the donor and the primary acceptor, the radiative transition improvement and non-radiative transition suppression can be simultaneously achieved for "full-exciton radiation". A molecule using diphenylphosphine oxide as the secondary acceptor exhibits ≈100% photoluminescence quantum yield on the basis of its tenfold increased singlet radiative rate constant, fivefold decreased singlet and triplet non-radiative rate constants, and ≈100% reverse intersystem crossing efficiency, which further endows ≈100% exciton utilization efficiency to its sky-blue OLEDs.
TL;DR: This is the first demonstration of high-efficiency and stable sky-blue devices (CIEy < 0.4) based on delayed fluorescence, which represents an important advance in the field of blue organic light-emitting diode technology.
Abstract: Organic light-emitting diodes utilizing thermally activated delayed fluorescence is a potential solution for achieving stable blue devices. Sky-blue devices (CIEy 15%) at 1000 cd m−2 based on either delayed fluorescence or phosphorescence are still limited and very hard to achieve simultaneously. Here, we report the design and synthesis of a new thermally activated delayed fluorescence emitter, 3Ph2CzCzBN. A sky-blue device based on 3Ph2CzCzBN exhibits a high external quantum efficiency of 16.6% at 1000 cd m−2. The device shows a sky-blue electroluminescence of 482 nm and achieves Commission Internationale de l’ Eclairage coordinates of (0.17, 0.36). The sky-blue device exhibits a superb LT90 of 38 h. This is the first demonstration of high-efficiency and stable sky-blue devices (CIEy < 0.4) based on delayed fluorescence, which represents an important advance in the field of blue organic light-emitting diode technology. The potential of organic light-emitting diodes (OLEDs) for display and lighting applications is limited by the need for blue emitters that show efficient and stable operation. Here, the authors report stable and efficient thermally activated delayed fluorescence OLEDs based on a sky-blue emitter.
TL;DR: The results prove the feasibility of D-Spacer-A molecules to develop intermolecular CT transition TADF emitters for efficient non-doped OLEDs.
Abstract: A novel molecular model of connecting electron-donating (D) and electron-withdrawing (A) moieties via a space-enough and conjugation-forbidden linkage (D-Spacer-A) is proposed to develop efficient non-doped thermally activated delayed fluorescence (TADF) emitters. 10-(4-(4-(4,6-diphenyl-1,3,5-triazin-2-yl) phenoxy) phenyl)-9,9-dimethyl-9,10-dihydroacridine (DMAC-o-TRZ) was designed and synthesized accordingly. As expected, it exhibits local excited properties in single-molecule state as D-Spacer-A molecular backbone strongly suppress the intramolecular charge-transfer (CT) transition. And intermolecular CT transition acted as the vital radiation channel for neat DMAC-o-TRZ film. As in return, the non-doped device exhibits a remarkable maximum external quantum efficiency (EQE) of 14.7 %. These results prove the feasibility of D-Spacer-A molecules to develop intermolecular CT transition TADF emitters for efficient non-doped OLEDs.
TL;DR: Two new blue emitters, i.e., bis-[2-(9,9-dimethyl-9,10-dihydroacridine)-phenyl]-sulfone and m-ACSO2, with reserved fine thermally activated delayed fluorescent (TADF) nature and simply tuned thermal and optoelectronic properties are synthesized by isomer engineering.
Abstract: Two new blue emitters, i.e., bis-[2-(9,9-dimethyl-9,10-dihydroacridine)-phenyl]-sulfone (o-ACSO2) and bis-[3-(9,9-dimethyl-9,10-dihydroacridine)-phenyl]-sulfone (m-ACSO2), with reserved fine thermally activated delayed fluorescent (TADF) nature and simply tuned thermal and optoelectronic properties, were synthesized by isomer engineering. The meta-linking compound, i.e., m-ACSO2, obtains the highest photoluminescence quantum yield with a small singlet–triplet energy gap, a moderate delayed fluorescent lifetime, excellent solubility, and neat film homogeneity. Due to its unique aggregation-induced emission (AIE) character, neat film-based heterojunction-like organic light-emitting diodes (OLEDs) are achievable. By inserting an excitonic inert exciton-blocking layer, the PN heterojunction-like emission accompanied by intefacial exciplex was shifted to a homojunction-like channel mainly from the AIE emitter itself, providing a new tactic to generate efficient blue color from neat films. The solution-processe...
TL;DR: This demonstration clearly indicates that the harvesting of triplets produced by singlet fission as electroluminescence is possible even under electrical excitation, leading to an enhancement of the quantum efficiency of the OLEDs.
Abstract: Harvesting of both triplets and singlets yields electroluminescence quantum efficiencies of nearly 100% in organic light-emitting diodes (OLEDs), but the production efficiency of excitons that can undergo radiative decay is theoretically limited to 100% of the electron-hole pairs. Here, breaking of this limit by exploiting singlet fission in an OLED is reported. Based on the dependence of electroluminescence intensity on an applied magnetic field, it is confirmed that triplets produced by singlet fission in a rubrene host matrix are emitted as near-infrared (NIR) electroluminescence by erbium(III) tris(8-hydroxyquinoline) (ErQ3 ) after excitonic energy transfer from the "dark" triplet state of rubrene to an "emissive" state of ErQ3 , leading to NIR electroluminescence with an overall exciton production efficiency of 100.8%. This demonstration clearly indicates that the harvesting of triplets produced by singlet fission as electroluminescence is possible even under electrical excitation, leading to an enhancement of the quantum efficiency of the OLEDs. Electroluminescence employing singlet fission provides a route toward developing high-intensity NIR light sources, which are of particular interest for sensing, optical communications, and medical applications.
TL;DR: A 3.2-in flexible color display, with a resolution of 50 ppi and composed of bottom-emission multiphoton organic light-emitting diodes (OLEDs) and inkjet-printed organic thin-film transistors (OTFTs) with a bottom-gate/bottom-contact structure on a color filter, was developed.
Abstract: A 3.2-in flexible color display, with a resolution of 50 ppi and composed of bottom-emission multiphoton organic light-emitting diodes (OLEDs) and inkjet-printed organic thin-film transistors (OTFTs) with a bottom-gate/bottom-contact structure on a color filter, was developed. The device could successfully display color videos while being bent, and achieved a maximum luminance of 125 cd/m2 with white light emission. The gate dielectrics of the OTFTs used on the backplane were bilayers of cardo polymer and Parylene, and the material used for the organic semiconductors was dithieno [2,3-d;2’,3’-d’]benzo[1,2-b;4,5-b’]dithiophene blended with polystyrene in tetralin solvent, which was coated using inkjet printing to sufficiently fill the banks composed of a fluorine-based polymer. OTFTs with a channel length of 5 $\mu \text{m}$ were created using the above process, and the structure achieved a high mobility of 1.2 $\mathrm {cm}^{{{2}}}/({\mathrm{ V}}\cdot \text{s}$ ), making it suitable for flexible color OLED displays. The mobility was about three times as high as that obtained using solution shearing methods.