Showing papers in "arXiv: Applied Physics in 2018"

High-Performance Hybrid Silicon and Lithium Niobate Mach-Zehnder Modulators for 100 Gbit/s and Beyond

Abstract: Optical modulators are at the heart of optical communication links Ideally, they should feature low insertion loss, low drive voltage, large modulation bandwidth, high linearity, compact footprint and low manufacturing cost Unfortunately, these criteria have only been achieved on separate occasionsBased on a Silicon and Lithium Niobate hybrid integration platform, we demonstrate Mach-Zehnder modulators that simultaneously fulfill these criteria The presented device exhibits an insertion loss of 25 dB, voltage-length product of 22 Vcm, high linearity, electro-optic bandwidth of at least 70 GHz and modulation rates up to 112 Gbit/s The high-performance modulator is realized by seamless integration of high-contrast waveguide based on Lithium Niobate - the most mature modulator material - with compact, low-loss silicon circuits The hybrid platform demonstrated here allows for the combination of 'best-in-breed' active and passive components, opening up new avenues for enabling future high-speed, energy efficient and cost-effective optical communication networks

The perovskite/transport layer interfaces dominate non-radiative recombination in efficient perovskite solar cells

Abstract: Charge transport layers (CTLs) are key components of diffusion controlled perovskite solar cells, however, they can induce additional non-radiative recombination pathways which limit the open circuit voltage (V_OC) of the cell. In order to realize the full thermodynamic potential of the perovskite absorber, both the electron and hole transport layer (ETL/HTL) need to be as selective as possible. By measuring the quasi-Fermi level splitting (QFLS) of perovskite/CTL heterojunctions, we quantify the non-radiative interfacial recombination current for a wide range of commonly used CTLs, including various hole-transporting polymers, spiro-OMeTAD, metal oxides and fullerenes. We find that all studied CTLs limit the V_OC by inducing an additional non-radiative recombination current that is significantly larger than the loss in the neat perovskite and that the least-selective interface sets the upper limit for the V_OC of the device. The results also show that the V_OC equals the internal QFLS in the absorber layer of (pin, nip) cells with selective CTLs and power conversion efficiencies of up to 21.4%. However, in case of less selective CTLs, the V_OC is substantially lower than the QFLS which indicates additional losses at the contacts and/or interfaces. The findings are corroborated by rigorous device simulations which outline several important considerations to maximize the V_OC. This work shows that the real challenge to supress non-radiative recombination losses in perovskite cells on their way to the radiative limit lies in the suppression of carrier recombination at the perovskite/CTL interfaces.

Magnetic nanoparticles in nanomedicine

Abstract: Nanomaterials, in addition to their small size, possess unique physicochemical properties that differ from the bulk materials, making them ideal for a host of novel applications. Magnetic nanoparticle (MNP) is one important class of nanomaterials that have been widely studied for their potential applications in nanomedicine. Due to the fact that MNPs can be detected and manipulated by remote magnetic fields, it opens a wide opportunity for them to be used in vivo. Nowadays, MNPs have been used for diverse applications including magnetic biosensing (diagnostics), magnetic imaging, magnetic separation, drug and gene delivery, and hyperthermia therapy, etc. This review aims to provide a comprehensive assessment of the state-of-the-art biological and biomedical applications of MNPs. In addition, the development of high magnetic moment MNPs with proper surface functionalization has progressed exponentially over the past decade. Herein, we also reviewed the recent advances in the synthesis and surface coating strategies of MNPs. This review is not only to provide in-depth insights into the different synthesis, biofunctionalization, biosensing, imaging, and therapy methods but also to give an overview of limitations and possibilities of each technology.

Ultrahigh-efficiency second-harmonic generation in nanophotonic PPLN waveguides

Abstract: Periodically poled lithium niobate (PPLN) waveguide is a powerful platform for efficient wavelength conversion. Conventional PPLN converters however typically require long device lengths and high pump powers due to the limited nonlinear interaction strength. Here we use a nanostructured PPLN waveguides to demonstrate an ultrahigh normalized efficiency of 2600%/W-cm$^2$ for second-harmonic generation of 1.5-$\mu$m radiation, more than 20 times higher than that in state-of-the-art diffused waveguides. This is achieved by a combination of sub-wavelength optical confinement and high-fidelity periodic poling at a first-order poling period of 4 $\mu$m. Our highly integrated PPLN waveguides are promising for future chip-scale integration of classical and quantum photonic systems.

High-efficiency perovskite-polymer bulk heterostructure light-emitting diodes

Abstract: Perovskite-based optoelectronic devices have gained significant attention due to their remarkable performance and low processing cost, particularly for solar cells. However, for perovskite light-emitting diodes (LEDs), non-radiative charge carrier recombination has limited electroluminescence (EL) efficiency. Here we demonstrate perovskite-polymer bulk heterostructure LEDs exhibiting record-high external quantum efficiencies (EQEs) exceeding 20%, and an EL half-life of 46 hours under continuous operation. This performance is achieved with an emissive layer comprising quasi-2D and 3D perovskites and an insulating polymer. Transient optical spectroscopy reveals that photogenerated excitations at the quasi-2D perovskite component migrate to lower-energy sites within 1 ps. The dominant component of the photoluminescence (PL) is primarily bimolecular and is characteristic of the 3D regions. From PL quantum efficiency and transient kinetics of the emissive layer with/without charge-transport contacts, we find non-radiative recombination pathways to be effectively eliminated. Light outcoupling from planar LEDs, as used in OLED displays, generally limits EQE to 20-30%, and we model our reported EL efficiency of over 20% in the forward direction to indicate the internal quantum efficiency (IQE) to be close to 100%. Together with the low drive voltages needed to achieve useful photon fluxes (2-3 V for 0.1-1 mA/cm2), these results establish that perovskite-based LEDs have significant potential for light-emission applications.

Integrated gallium phosphide nonlinear photonics

Abstract: Gallium phosphide (GaP) is an indirect bandgap semiconductor used widely in solid-state lighting. Despite numerous intriguing optical properties---including large $\chi^{(2)}$ and $\chi^{(3)}$ coefficients, a high refractive index ($>3$), and transparency from visible to long-infrared wavelengths ($0.55-11\,\mu$m)---its application as an integrated photonics material has been little studied. Here we introduce GaP-on-insulator as a platform for nonlinear photonics, exploiting a direct wafer bonding approach to realize integrated waveguides with 1.2 dB/cm loss in the telecommunications C-band (on par with Si-on-insulator). High quality $(Q> 10^5)$, grating-coupled ring resonators are fabricated and studied. Employing a modulation transfer approach, we obtain a direct experimental estimate of the nonlinear index of GaP at telecommunication wavelengths: $n_2=1.2(5)\times 10^{-17}\,\text{m}^2/\text{W}$. We also observe Kerr frequency comb generation in resonators with engineered dispersion. Parametric threshold powers as low as 3 mW are realized, followed by broadband ($>100$ nm) frequency combs with sub-THz spacing, frequency-doubled combs and, in a separate device, efficient Raman lasing. These results signal the emergence of GaP-on-insulator as a novel platform for integrated nonlinear photonics.

Leveraging Elastic instabilities for Amplified Performance: spine-inspired high-speed and high-force soft robots

Abstract: Soft machines typically exhibit slow locomotion speed and low manipulation strength because of intrinsic limitations of soft materials. Here, we present a generic design principle that harnesses mechanical instability for a variety of spine-inspired fast and strong soft machines. Unlike most current soft robots that are designed as inherently and unimodally stable, our design leverages tunable snap-through bistability to fully explore the ability of soft robots to rapidly store and release energy within tens of milliseconds. We demonstrate this generic design principle with three high-performance soft machines: High-speed cheetah-like galloping crawlers with locomotion speeds of 2.68 body length/s, high-speed underwater swimmers (0.78 body length/s), and tunable low-to-high-force soft grippers with over 1 to 103 stiffness modulation (maximum load capacity is 11.4 kg). Our study establishes a new generic design paradigm of next-generation high-performance soft robots that are applicable for multifunctionality, different actuation methods, and materials at multiscales.

A silicon photonic modulator neuron

Abstract: There has been a recently renewed interest in neuromorphic photonics, a field promising to access pivotal and unexplored regimes of machine intelligence. Progress has been made on isolated neurons and analog interconnects; nevertheless, this renewal has yet to produce a demonstration of a silicon photonic neuron capable of interacting with other like neurons. We report a modulator-class photonic neuron fabricated in a conventional silicon photonic process line. We demonstrate behaviors of transfer function configurability, fan-in, inhibition, time-resolved processing, and, crucially, autaptic cascadability -- a sufficient set of behaviors for a device to act as a neuron participating in a network of like neurons. The silicon photonic modulator neuron constitutes the final piece needed to make photonic neural networks fully integrated on currently available silicon photonic platforms.

Anti-fatigue-fracture hydrogels

Abstract: The emerging applications of hydrogels in devices and machines require these soft materials to maintain robustness under cyclic mechanical loads. Whereas hydrogels have been made tough to resist fracture under a single cycle of mechanical load, these toughened gels still suffer from fatigue fracture under multiple cycles of loads. The reported fatigue threshold (i.e., the minimal fracture energy at which crack propagation occurs under cyclic loads) for synthetic hydrogels is on the order of 1-100 J/m2, which is primarily associated with the energy required to fracture a single layer of polymer chains per unit area. Here, we demonstrate that the controlled introduction of crystallinity in hydrogels can significantly enhance their fatigue thresholds, since the process of fracturing crystalline domains for fatigue-crack propagation requires much higher energy than fracturing a single layer of polymer chains. The fatigue threshold of polyvinyl alcohol (PVA) with a crystallinity of 18.9 wt.% in the swollen state can exceed 1,000 J/m2. We further develop a strategy to enhance the anti-fatigue-fracture properties of PVA hydrogels, but still maintain their high water contents and low moduli by patterning highly-crystalline regions in the hydrogels. The current work not only reveals an anti-fatigue-fracture mechanism in hydrogels but also provides a practical method to design anti-fatigue-fracture hydrogels for diverse applications.

Beyond traditional coatings, a review on thermal sprayed functional and smart coatings

Abstract: Thermal spraying has been present for over a century, being greatly refined and optimised during this time, becoming nowadays a reliable and cost-efficient method to deposit thick coatings with a wide variety of feedstock materials and substrates. Thermal sprayed coatings have been successfully applied in fields such as aerospace or electricity production, becoming an essential component of today's industry. To overpass the traditional capabilities of those coatings, new functionalities and coherent responses are being integrated, opening the field of functional and smart coatings. The aim of this paper is to present a comprehensive review of the current state of functional and smart coatings produced using thermal spraying deposition. It will first describe the different thermal spraying technologies, with a focus on how different techniques achieve the thermal and kinetic energy required to form a coating, as well as the environment to which feedstock particles are exposed in terms of temperature and velocity. It will then deal with the state-of-the-art functional and smart coatings applied using thermal spraying techniques, with a discussion on the fundamentals on which the coatings are designed, the efficiency of its performance and the industrial applications, both current and potential. The inherent designing flexibility of thermal sprayed functional and smart coatings has been exploited to explore exciting new possibilities on many different fields. Applications such as anti-bacterial and anti-fouling coatings, superhydrophobic surfaces, electrical and heating devices for functional coatings and self-healing, self-lubricating and sensors for smart coatings are here presented and discussed. All these exciting developments pave the way for the numerous applications that are to come in the next decade, making the field of thermal sprayed coatings a unique opportunity for research.

Photonic RF and microwave reconfigurable filters and true time delays based on an integrated optical Kerr frequency comb source

Abstract: We demonstrate advanced transversal radio frequency (RF) and microwave functions based on a Kerr optical comb source generated by an integrated micro-ring resonator. We achieve extremely high performance for an optical true time delay aimed at tunable phased array antenna applications, as well as reconfigurable microwave photonic filters. Our results agree well with theory. We show that our true time delay would yield a phased array antenna with features that include high angular resolution and a wide range of beam steering angles, while the microwave photonic filters feature high Q factors, wideband tunability, and highly reconfigurable filtering shapes. These results show that our approach is a competitive solution to implementing reconfigurable, high performance and potentially low cost RF and microwave

Nanophotonic Pockels modulators on a silicon nitride platform

Abstract: Silicon nitride (SiN) is emerging as a competitive platform for CMOS-compatible integrated photonics. However, active devices such as modulators are scarce and still lack in performance. Ideally, such a modulator should have a high bandwidth, good modulation efficiency, low loss, and cover a wide wavelength range. Here, we demonstrate the first electro-optic modulators based on ferroelectric lead zirconate titanate (PZT) films on SiN, in both the O- and the C-band. Bias-free operation, bandwidths beyond 33 GHz and data rates of 40 Gbps are shown, as well as low propagation losses ($\alpha\approx 1$ dB/cm). A $V_\pi L\approx$ 3.2 Vcm is measured. Simulations indicate that values below 2 Vcm are achievable. This approach offers a much-anticipated route towards high-performance phase modulators on SiN.

A Radio Frequency Channelizer based on Cascaded Integrated Micro-ring Resonator Optical Comb Sources and Filters

Abstract: We report a broadband RF channelizer based on an integrated optical frequency Kerr micro-comb source, with an RF channelizing bandwidth of 90 GHz, a high RF spectral slice resolution of 1.04 GHz, and experimentally verify the RF performance up to 19 GHz. This approach to realizing RF channelizers offers reduced complexity, size, and potential cost for a wide range of applications to microwave signal detection.

Probing the loss origins of ultra-smooth $\mathrm{Si_3N_4}$ integrated photonic waveguides

Abstract: On-chip optical waveguides with low propagation losses and precisely engineered group velocity dispersion (GVD) are important to nonlinear photonic devices such as soliton microcombs. Yet, despite intensive research efforts, nonlinear integrated photonic platforms still feature propagation losses orders of magnitude higher than in standard optical fiber. The tight confinement and high index contrast of integrated waveguides make them highly susceptible to fabrication induced surface roughness. Therefore, microresonators with ultra-high Q factors are, to date, only attainable in polished bulk crystalline, or chemically etched silica based devices, that pose however challenges for full photonic integration. Here, we demonstrate the fabrication of silicon nitride ($\mathrm{Si_3N_4}$) waveguides with unprecedentedly smooth sidewalls and tight confinement with record low propagation losses. This is achieved by combining the photonic Damascene process with a novel reflow process, which reduces etching roughness, while sufficiently preserving dimensional accuracy. This leads to previously unattainable \emph{mean} microresonator Q factors larger than $5\times10^6$ for tightly confining waveguides with anomalous dispersion. Via systematic process step variation and two independent characterization techniques we differentiate the scattering and absorption loss contributions, and reveal metal impurity related absorption to be an important loss origin. Although such impurities are known to limit optical fibers, this is the first time they are identified, and play a tangible role, in absorption of integrated microresonators. Taken together, our work provides new insights in the origins of propagation losses in $\mathrm{Si_3N_4}$ waveguides and provides the technological basis for integrated nonlinear photonics in the ultra-high Q regime.

Petahertz Spintronics.

Abstract: The enigmatic coupling between electronic and magnetic phenomena was one of the riddles propelling the development of modern electromagnetism. Today, the fully controlled electric field evolution of ultrashort laser pulses permits the direct and ultrafast control of electronic properties of matter and is the cornerstone of light-wave electronics. In sharp contrast, because there is no first order interaction between light and spins, the magnetic properties of matter can only be affected indirectly on the much slower tens-of-femtosecond timescale in a sequence of optical excitation followed by the rearrangement of the spin structure. Here we record an orders of magnitude faster magnetic switching with sub-femtosecond response time by initiating optical excitations with near-single-cycle laser pulses in a ferromagnetic layer stack. The unfolding dynamics are tracked in real-time by a novel attosecond time-resolved magnetic circular dichroism (atto-MCD) detection scheme revealing optically induced spin and orbital momentum transfer (OISTR) in synchrony with light field driven charge relocation. In tandem with ab-initio quantum dynamical modelling, we show how this mechanism provides simultaneous control over electronic and magnetic properties that are at the heart of spintronic functionality. This first incarnation of attomagnetism observes light field coherent control of spin-dynamics in the initial non-dissipative temporal regime and paves the way towards coherent spintronic applications with Petahertz clock rates.

Apically Dominant Mechanism for Improving Catalytic Activities of N-Doped Carbon Nanotube Arrays in Rechargeable Zinc-Air Battery

Abstract: The oxygen reduction (ORR) and oxygen evolution reactions (OER) in Zn-air batteries (ZABs) require highly efficient, cost-effective and stable electrocatalysts as replacements to traditionally high cost, inconsistently stable and low poison resistant Platinum group metals (PGM) catalysts Although, nitrogen-doped carbon nanotube (NCNT) arrays have been developed over recent decades through various advanced technologies are now capable of catalyzing ORR efficiently, their underdeveloped bifunctional property, hydrophobic surface, and detrimental preparation strategy are found to limit practical large-scale commercialization for effective rechargeable ZABs Here, we have demonstrated fabrication of a three-dimensional (3D) nickel foam supported NCNT arrays with CoNi nanoparticles (NPs) encapsulated within the apical domain (denoted as CoNi@NCNT/NF) that exhibits excellent bifunctional catalytic performance toward both ORR (onset potential of 097 V vs RHE) and OER (overpotential of 154 V vs RHE at 10 mA cm$^{-2}$) We further examined the practicability of this CoNi@NCNT/NF material being used as an air electrode for rechargeable ZAB coin cell and pouch cell systems The ZAB coin cell showed a peak power density of 108 mW cm$^{-2}$ with an energy density of 845 Wh kg$_{Zn}^{-1}$ and robust rechargeability over 28h under ambient conditions, which exceeds the performance of PGM catalysts and leading non-PGM electrocatalysts In addition, density functional theory (DFT) calculations revealed that the ORR and OER catalytic performance of the CoNi@NCNT/NF electrode are mainly derived from the d-orbitals from the CoNi NPs encapsulated within the apical dominant end of the NCNTs

Extreme Broadband Transparent Optical Phase Change Materials for High-Performance Nonvolatile Photonics

Abstract: Optical phase change materials (O-PCMs), a unique group of materials featuring drastic optical property contrast upon solid-state phase transition, have found widespread adoption in photonic switches and routers, reconfigurable meta-optics, reflective display, and optical neuromorphic computers. Current phase change materials, such as Ge-Sb-Te (GST), exhibit large contrast of both refractive index (delta n) and optical loss (delta k), simultaneously. The coupling of both optical properties fundamentally limits the function and performance of many potential applications. In this article, we introduce a new class of O-PCMs, Ge-Sb-Se-Te (GSST) which breaks this traditional coupling, as demonstrated with an optical figure of merit improvement of more than two orders of magnitude. The first-principle computationally optimized alloy, Ge2Sb2Se4Te1, combines broadband low optical loss (1-18.5 micron), large optical contrast (delta n = 2.0), and significantly improved glass forming ability, enabling an entirely new field of infrared and thermal photonic devices. We further leverage the material to demonstrate nonvolatile integrated optical switches with record low loss and large contrast ratio, as well as an electrically addressed, microsecond switched pixel level spatial light modulator, thereby validating its promise as a platform material for scalable nonvolatile photonics.

Nonreciprocal Inter-band Brillouin Modulation

Abstract: Achieving nonreciprocal light propagation in photonic circuits is essential to control signal crosstalk and optical back-scatter. However, realizing high-fidelity nonreciprocity in low-loss integrated photonic systems remains challenging. In this paper, we experimentally demonstrate a device concept based on nonlocal acousto-optic light scattering to produce nonreciprocal single-sideband modulation and mode conversion in an integrated silicon photonic platform. In this process, a traveling-wave acoustic phonon driven via optical forces in a silicon waveguide is used to modulate light in a spatially separate waveguide through a linear inter-band Brillouin scattering process. We demonstrate up to 38 dB of nonreciprocity with 37 dB of single-sideband suppression. In contrast to prior Brillouin- and optomechanics-based schemes for nonreciprocity, the bandwidth of this scattering process is set through optical phase-matching, not acoustic or optical resonances. As a result, record-large bandwidths in excess of 125 GHz are realized, with potential for significant further improvement through optical dispersion engineering. Tunability of the nonreciprocal modulator operation wavelength over a 35 nm bandwidth is demonstrated by varying the optical pump wavelength. Such traveling-wave acousto-optic modulators provide a promising path toward the realization of broadband, low-loss isolators and circulators in integrated photonic circuits.

Poly(ionic liquid)-Derived Carbon with Site-Specific N-Doping and Biphasic Heterojunction for Enhanced CO2 Capture and Sensing

Abstract: CO2 capture is a pressing global environmental issue that drives scientists to develop creative strategies for tackling this challenge. The concept in this contribution is to produce site specific nitrogen doping in microporous carbon fibers. It creates a carbon/carbon heterojunction by using poly(ionic liquid) (PIL) as soft activation agent that deposits nitrogen species exclusively on the skin of commercial microporous carbon fibers. Such carbon-based biphasic heterojunction amplifies the interaction between carbon fiber and CO2 molecule for unusually high CO2 uptake and resistive sensing.

Intelligent Metasurfaces with Continuously Tunable Local Surface Impedance for Multiple Reconfigurable Functions.

Abstract: Electromagnetic metasurfaces can be characterized as intelligent if they are able to perform multiple tunable functions, with the desired response being controlled by a computer influencing the individual electromagnetic properties of each metasurface inclusion. In this paper, we present an example of an intelligent metasurface which operates in the reflection mode in the microwave frequency range. We numerically show that without changing the main body of the metasurface we can achieve tunable perfect absorption and tunable anomalous reflection. The tunability features can be implemented using mixed-signal integrated circuits (ICs), which can independently vary both the resistance and reactance, offering complete local control over the complex surface impedance. The ICs are embedded in the unit cells by connecting two metal patches over a thin grounded substrate and the reflection property of the intelligent metasurface can be readily controlled by a computer. Our intelligent metasurface can have significant influence on future space-time modulated metasurfaces and a multitude of applications, such as beam steering, energy harvesting, and communications.

Graphene Composites with Dual Functionality: Electromagnetic Shielding and Thermal Management.

Abstract: We report on the synthesis and characterization of the epoxy-based composites with the few-layer graphene fillers, which are capable of the duel functional applications. It was found that composites with the certain types of few-layer graphene fillers reveal an efficient total electromagnetic interference shielding, SE~45 dB, in the important X-band frequency range, f=8.2 GHz - 12.4 GHz, while simultaneously providing the high thermal conductivity, K = 8 W/mK, which is a factor of x35 larger than that of the base matrix material. The efficiency of the dual functional application depends on the filler characteristics: thickness, lateral dimensions, aspect ratio and concentration. Graphene loading fractions above the percolation threshold allow for strong enhancement of both the electromagnetic interference shielding and heat conduction properties. Interestingly, graphene composites can block the electromagnetic energy even below the percolation threshold, remaining electrically insulating, which is an important feature for some types of thermal interface materials. The dual functionality of the graphene composites can substantially improve the electromagnetic shielding and thermal management of the airborne systems while simultaneously reducing their weight and cost.

Lithium niobate micro-disk resonators of quality factors above 10^7

Abstract: We report on fabrication of crystalline lithium niobate microresonators with quality factors above 10^7 as measured around 770 nm wavelength. Our technique relies on femtosecond laser micromachining for patterning a mask coated on the lithium niobate on insulate (LNOI) into a microdisk, followed by a chemo-mechanical polishing process for transferring the disk-shaped pattern to the LNOI. Nonlinear processes including second harmonic generation and Raman scattering have been demonstrated in the fabricated microdisk.

Ultra-compact graphene plasmonic photodetector with the bandwidth over 110GHz

Abstract: Graphene-based photodetectors, taking advantage of high carrier mobility and broadband absorption in graphene, have recently experienced rapid development. However, their performances with respect to the responsivity and bandwidth are still limited by either weak light-graphene interaction or large resistance-capacitance product. Here, we demonstrate a waveguide coupled integrated graphene plasmonic photodetector on the silicon-on-insulator platform. Benefiting from plasmonic enhanced graphene-light interactions and subwavelength confinement of the optical energy, we present a small-footprint graphene-plasmonic photodetector with bandwidth beyond 110GHz and intrinsic responsivity of 360mA/W. Attributed to the unique electronic bandstructure of graphene and its ultra-broadband absorption, the operational wavelength range extending beyond mid-infrared, and possibly further, can be anticipated. Our results show that the combination of graphene with plasmonic devices has great potential to realize ultra-compact and high-speed optoelectronic devices for graphene-based optical interconnects.

The Two Faces of Capacitance: New Interpretations for Electrical Impedance Measurements of Perovskite Solar Cells and Their Relation to Hysteresis

Abstract: Perovskite solar cells are notorious for exhibiting transient behaviour not seen in conventional inorganic semiconductor devices. Significant inroads have been made into understanding this fact in terms of rapid ion migration, now a well-established property of the prototype photovoltaic perovskite MAPbI$_3$ and strongly implicated in the newer mixed compositions. Here we study the manifestations of ion migration in frequency-domain small-signal measurements, focusing on the popular technique of Electrical Impedance Spectroscopy (EIS). We provide new interpretations for a variety of previously puzzling features, including giant photo-induced low-frequency capacitance and negative capacitance in a variety of forms. We show that these apparently strange measurements can be rationalized by the splitting of AC current into two components, one associated with charge-storage, and the other with the quasi-steady-state recombination current of electrons and holes. The latter contribution to the capacitance can take either a positive or a negative sign, and is potentially very large when slow, voltage-sensitive processes such as ion migration are at play. Using numerical drift-diffusion semiconductor models, we show that giant photo-induced capacitance, inductive loop features, and low-frequency negative capacitance all emerge naturally as consequences of ion migration via its coupling to quasi-steady-state electron and hole currents. In doing so, we unify the understanding of EIS measurements with the comparably well-developed theory of rate dependent current-voltage (I-V) measurements in perovskite cells. Comparing the two techniques, we argue that EIS is more suitable for quantifying I-V hysteresis than conventional methods based on I-V sweeps, and demonstrate this application on a variety of cell types.

All-optical Nonlinear Activation Function for Photonic Neural Networks

Abstract: With the recent successes of neural networks (NN) to perform machine-learning tasks, photonic-based NN designs may enable high throughput and low power neuromorphic compute paradigms since they bypass the parasitic charging of capacitive wires. Thus, engineering data-information processors capable of executing NN algorithms with high efficiency is of major importance for applications ranging from pattern recognition to classification. Our hypothesis is therefore, that if the time-limiting electro-optic conversion of current photonic NN designs could be postponed until the very end of the network, then the execution time of the photonic algorithm is simple the delay of the time-of-flight of photons through the NN, which is on the order of picoseconds for integrated photonics. Exploring such all-optical NN, in this work we discuss two independent approaches of implementing the optical perceptrons nonlinear activation function based on nanophotonic structures exhibiting i) induced transparency and ii) reverse saturated absorption. Our results show that the all-optical nonlinearity provides about 3 and 7 dB extinction ratio for the two systems considered, respectively, and classification accuracies of an exemplary MNIST task of 97% and near 100% are found, which rivals that of software based trained NNs, yet with ignored noise in the network. Together with a developed concept for an all-optical perceptron, these findings point to the possibility of realizing pure photonic NNs with potentially unmatched throughput and even energy consumption for next generation information processing hardware.

Hybrid integration of silicon photonics circuits and InP lasers by photonic wire bonding

Abstract: Efficient coupling of III-V light sources to silicon photonic circuits is one of the key challenges of integrated optics. Important requirements are low coupling losses, as well as small footprint and high yield of the overall assembly, along with the ability to use automated processes for large-scale production. In this paper, we demonstrate that photonic wire bonding addresses these challenges by exploiting direct-write two-photon lithography for in-situ fabrication of three-dimensional freeform waveguides between optical chips. In a series proof-of-concept experiments, we connect InP-based horizontal-cavity surface emitting lasers (HCSEL) to passive silicon photonic circuits with insertion losses down to 0.4 dB. To the best of our knowledge, this is the most efficient interface between an InP light source and a silicon photonic chip that has so far been demonstrated. Our experiments represent a key step in advancing photonic wire bonding to a universal integration platform for hybrid photonic multi-chip assemblies that combine known-good dies of different materials to high-performance hybrid multi-chip modules.

Halide perovskites: Is it all about the interfaces?

Abstract: Design and modification of the interfaces, always a critical issue for semiconductor devices, has become the primary tool to harness the full potential of halide perovskite (HaP)-based ones. In particular the outstanding improvements in HaP solar cell performance and stability can be primarily ascribed to a careful choice of the interfacial layout in the layer stack. In this review we describe the unique challenges and opportunities of these approaches (section A). For this purpose, we first elucidate the basic physical and chemical properties of the exposed HaP thin film and crystal surface (section B). We then lay out the energetic alignment processes to adjacent transport and buffer layers (section C) and finally elaborate on the impact of the interface formation on how well/poor a device functions. Based on those sections we then present a road map for the next steps in interfacial design principles for HaP semiconductors (section D).

Unlimited Accumulation of Electromagnetic Energy Using Time-Varying Reactive Elements

Abstract: Accumulation of energy by reactive elements is limited by the amplitude of time-harmonic external sources. In the steady-state regime, all incident power is fully reflected back to the source, and the stored energy does not increase in time, although the external source continuously supplies energy. Here, we show that this claim is not true if the reactive element is time-varying, and time-varying lossless loads of a transmission line or lossless metasurfaces can accumulate electromagnetic energy supplied by a time-harmonic source continuously in time without any theoretical limit. We analytically derive the required time dependence of the load reactance and show that it can be in principle realized as a series connection of mixers and filters. Furthermore, we prove that properly designing time-varying LC circuits one can arbitrarily engineer the time dependence of the current in the circuit fed by a given time-harmonic source. As an example, we theoretically demonstrate a circuit with a linearly increasing current through the inductor. Such LC circuits can accumulate huge energy from both the time-harmonic external source and the pump which works on varying the circuit elements in time. Finally, we discuss how this stored energy can be released in form of a time-compressed pulse.

Neuromorphic photonics with electro-absorption modulators

Abstract: Photonic neural networks benefit from both the high channel capacity- and the wave nature of light acting as an effective weighting mechanism through linear optics The neuron's activation function, however, requires nonlinearity which can be achieved either through nonlinear optics or electro-optics Nonlinear optics, while potentially faster, is challenging at low optical power With electro-optics, a photodiode integrating the weighted products of a photonic perceptron can be paired directly to a modulator, which creates a nonlinear transfer function for efficient operating Here we model the activation functions of five types of electro-absorption modulators, analyze their individual performance over varying performance parameters, and simulate their combined effect on the inference of the neural network

Reservoir computing with the frequency, phase and amplitude of spin-torque nano-oscillators

Abstract: Spin-torque nano-oscillators can emulate neurons at the nanoscale. Recent works show that the non-linearity of their oscillation amplitude can be leveraged to achieve waveform classification for an input signal encoded in the amplitude of the input voltage. Here we show that the frequency and the phase of the oscillator can also be used to recognize waveforms. For this purpose, we phase-lock the oscillator to the input waveform, which carries information in its modulated frequency. In this way we considerably decrease amplitude, phase and frequency noise. We show that this method allows classifying sine and square waveforms with an accuracy above 99% when decoding the output from the oscillator amplitude, phase or frequency. We find that recognition rates are directly related to the noise and non-linearity of each variable. These results prove that spin-torque nano-oscillators offer an interesting platform to implement different computing schemes leveraging their rich dynamical features.