Showing papers on "Power factor published in 1986"

Power Electronics and Ac Drives

Abstract: An integrated treatment of technological advances in power electronics Add this article to private library Remove from private library Submit corrections to this record View record in the new ADS and ac drives is presented. The topics include: power semiconductor devices, ac machines, phase-controlled converters and cycloconverters, voltage-fed inverter drives, current-fed inverter drives, slip powercontrolled drives, control of induction and synchronous machines, and microcomputer control. Both practical and theoretical aspects of the technology are addressed, and numerical examples are given. Bibtex entry for this abstract Preferred format for this abstract

Power Systems Analysis

Abstract: 1. Background. Introduction. Electric Energy. Fossil-Fuel Plant. Nuclear Power Plant. Hydroelectric Power Plant. Other Energy Sources. Transmission and Distribution Systems. The Deregulated Electric Power Industry. 2. Basic Principles. Introduction. Phasor Representation. Complex Power Supplied to a One-Port. Conservation of Complex Power. Balanced Three-Phase. Per Phase Analysis. Balanced Three-Phase Power. Summary. 3. Transmission-Line Parameters. Introduction. Review of Magnetics. Flux Linkages of Infinite Straight Wire. Flux Linkages Many-Conductor Case. Conductor Bundling. Transposition. Impedance of Three Phase lines Including Ground Return. Review of Electric Fields. Line Capacitance. Determination of Line Parameters Using Tables. Typical Parameter Values. Summary. 4. Transmission-Line Modeling. Introduction. Derivation of Terminal V, I Relations. Waves on Transmission Lines. Transmission Matrix. Lumped-Circuit Equivalent. Simplified Models. Complex Power Transmission (Short Line). Complex Power Transmission (Radial Line). Complex Power Transmission (Long or Medium Lines). Power-Handling Capability of Lines. Summary. 5. Transformer Modeling and the Per Unit System. Introduction. Single-Phase Transformer Model. Three-Phase Transformer Connections. Per Phase Analysis. Normal Systems. Per Unit Normalization. Per Unit Three-Phase Quantities. Change of Base. Per Unit Analysis of Normal System. Regulating Transformers for Voltage and Phase Angle Control. Autotransformers. Transmission Line and Transformers. Summary 6. Generator Modeling I (Machine Viewpoint). Introduction. Classical Machine Description. Voltage Generation. Open-Circuit Voltage. Armature Reaction. Terminal Voltage. Power Delivered by Generator. Synchronizing Generator to an Infinite Bus. Synchronous Condensor. Role of Synchronous Machine Excitation in Controlling Reactive Power. Summary. 7. Generator Modeling II (Circuit Viewpoint). Introduction. Energy Conversion. Application to Synchronous Machine. The Park Transformation. Park's Voltage Equation. Park's Mechanical Equation. Circuit Model. Instantaneous Power Output. Applications. Synchronous Operation. Steady-State Model. Simplified Dynamic Model. Generator Connected to Infinite Bus (Linear Model). Summary 8. Generator Voltage Control. Introduction. Exciter System Block Diagram. Generator Models. Stability of Excitation System. Voltage Regulation. Generator Connected to Infinite Bus. Summary. 9. Network Matrices. Introduction. Bus Admittance Matrix. Network Solution. Network Reduction (Kron Reduction). YBUS Structure and Manipulation. Bus Impedance Matrix. Inverse Elements to Determine Columns of ZBUS. Summary. 10. Power Flow Analysis. Introduction. Power Flow Equations. The Power Flow Problem. Solution by Gauss Iteration. More General Iteration Scheme. Newton-Raphson Iteration. Application to Power Flow Equations. Decoupled Power Flow. Control Implications. Regulating Transformers in Power Flow Analysis, Power Flow Solutions for Large Power Systems. Summary. 11. Automatic Generation Control and the New Market Environment. Introduction. Power Control System Modeling. Application to Single Machine-Infinite Bus System. Simplified Analysis of Power Control System. Power Control, Multigenerator Case. Special Case Two Generating Units. Division of Power System Into Control Areas. Formulation of the Economic Dispatch Problem. Classical Economic Dispatch (Line Losses Neglected). Generator Limits Included. Line Losses Considered. Calculation of Penalty Factors. Economic Issues and Mechanisms in the New Market Environment. Transmission Issues and Effects in the New Market Environment. Summary. 12. Unbalanced System Operation. Introduction. Symmetrical Components. Use of Symmetrical Components for Fault Analysis. Sequence Network Connections for Different Types of Faults. More General Fault Circuit Analysis. Power From Sequence Variables. Sequence Representation of Y and ...D Connected Circuits. Generator Models for Sequence Networks. Transformer Models for Sequence Networks. Sequence Representation of Transmission Lines. Assembly of Sequence Networks. Fault Analysis for Realistic Power System Model. Matrix Methods. Summary. 13. System Protection. Introduction. Protection of Radial Systems. System with Two Sources. Impedance (Distance) Relays. Modified-Impedance Relays. Differential Protection of Generators. Differential Protection of Transformers. Differential Protection of Buses and Lines. Overlapping Zones of Protection. Sequence Filters. Computer Relaying. Summary. 14. Power System Stability. Introduction. Model. Energy Balance. Linearization of Swing Equation. Solution of Nonlinear Swing Equation. Other Applications. Extension to Two-Machine Case. Multimachine Application. Multimachine Stability Studies. Summary. Appendices. Reluctance. Force Generation in a Solenoid. Method of Lagrange Multipliers. Root-Locus Method. Negative- and Zero-Sequence Impedances of Synchronous Machines. Inversion Formula. Modification of Impedance Matrices. Conductor Characteristics. Selected Bibliography. Index.

Control Strategy of Active Power Filters Using Multiple Voltage-Source PWM Converters

Abstract: The control strategy of active power filters using switching devices is proposed on the basis of the instantaneous reactive power theory. This aims at excellent compensation characteristics in transient states as well as steady states. The active power filter is developed, of which the power circuit consists of quadruple voltage-source PWM converters. As the result, interesting compensation characteristics were verified experimentally which could not be obtained by the active power filter based on the conventional reactive power theory.

Switching power supply with automatic power factor correction

Abstract: An off-line switching power supply is described which controls the switching transistor of a fly-back circuit in such a fashion as to achieve better than 0.99 power factor control. The technique used for power factor control allows the switching power supply to operate either from AC or DC sources. The power supply operating from an AC source will accept all international voltages and line frequencies as input to produce a well-regulated DC output. The inductor of the fly-back circuit is maintained at the verge of continuous/discontinuous operation by the power factor control circuit to achieve a high efficiency operation and to minimize switching losses. The power factor correction circuit uses pulsewidth modulation and frequency modulation to control the switching transistor and maintain a high power factor under varying line and load conditions. The power supply also includes integral current limiting protection and RFI filtering for safe and quiet operation.

Accurate simulation of power dissipation in VLSI circuits

Abstract: It becomes increasingly more important to reduce the power dissipation as the number of devices in VLSI increases. Accurate simulation of power dissipation is desirable while circuits are analyzed with circuit simulators such as SPICE. An accurate method is presented for simulating the power dissipation with use of a dependent current source and a parallel RC circuit. The steady-state voltage across the capacitor reads the average power drawn from the supply voltage source. Simulation results are shown for CMOS circuits.

Unity power factor power supply

Abstract: A unity power factor power supply which includes a boost converter connected to the alternating current line which is controlled to draw sinusoidal current from the line by operating as a current regulator having a current reference control signal which tracks the line voltage waveform, thereby to minimize the required input current for a given power output.

Adjustable Speed Drive and Power Rectifier Harmonics-Their Effect on Power Systems Components

Abstract: The use of the electrochemical rectifiers and the increasing application of ac and dc adjustable speed drives dictates that the effect of harmonic "pollution" on other equipment in the power system be considered An example power system is examined, and the necessary calculations are performed to show the effect harmonics have and investigate the probability of a harmonic resonance situation occurring The tolerances that various power system components have to harmonic currents and voltages are examined These components include transformers, reactors, capacitors, cable, switchgear, relaying, generators, and motors

Load current management system for automotive vehicles

Abstract: An electrical power delivery system and method of operation particularly suitable for use in a vehicle is disclosed. A single wire power conductor is connected through remote power switches to a plurality of loads. The power conductor is sized such that its current-carrying capacity is less than the current required to simultaneously operate all the loads connected thereto. Logic means are provided for delivering a control signal to the remote power switches to selectively energize the appropriate loads. The logic means additionally includes means responding to excess current flow through the power conductor to schedule the control signals to prevent simultaneous operation of all the loads thereby limiting current flow through the power conductor to its current-carrying capacity.

Simultaneous Active and Reactive Power Control of Superconducting Magnet Energy Storage Using GTO Converter

Abstract: By using GTO's (Gate Turn-Off Thyristor) in place of ordinary thyristors in a conventional six pulse Greatz bridge converter, forced commutation is possible, so in the usage of ac-dc power conversion the reactive power of not only lagging but also leading phase can be absorbed. This feature enables superconducting magnet energy storage (SMES) to control reactive power in the wide range between lagging and leading phases. By virtue of this control ability , SMES will be applicable for a power system stabilyzer. A GTO converter which mainly consists of six GTO's was developed and tested. In this GTO converter, the energy stored in leakage inductances of the transformer is handled by voltage clipper circuit. Then, by using two sets of these GTO converters, we carried out some experiments of simultaneous active and reactive power control of SMES. The experiments on the developed control system were successfully performed and the ability of controlling reactive power in the wide range between lagging phase and leading phase was verified.

Lighting system for normal and emergency operation of high intensity discharge lamps

Abstract: A lighting system is provided having a central power supply which includes an AC to DC converter. The DC power is distributed to a plurality of ballast circuits for discharge lamps. Each ballast circuit includes an inverter circuit for inverting the DC power to AC power of sufficient voltage to operate the associated lamps. Should the AC input power for the central power supply fail, batteries may be provided to supply the DC power continuously without interruption. The inverter circuits are operated at high frequency to reduce audible noise and eliminate noticeable strobing. The inverter circuit includes a switching circuit controlled by a pulse train. The duty cycle of the pulse train is controlled in accordance with a composite feedback signal which is the product of signals representative of the lamp operating voltage and lamp current.

Active filter for reactive power and harmonics compensation

Abstract: This paper describes a three-phase active filter aimed at the compensation of reactive power and current harmonics of a symmetrical load. The filter employs an inductor for energy storage and a two-quadrant PWM bridge converter.

An AC-to-DC Converter with Improved Input Power Factor and High Power Density

Abstract: A novel single-phase switch-mode rectifier (SMR) structure is proposed and analyzed. The proposed converter structure employs a synchronous front-end rectifier (SFER) stage which provides high-quality input characteristics with small input filtering. Consequently the proposed converter structure exhibits high power density and has low implementation cost.

Power line filter for transient and continuous noise suppression

Abstract: A power line filter suppresses or dissipates and clamps short rise time high voltage transients carried by power transmission lines and provides continuous protection against continuous type induced noise The power line filter includes one or more modules connected to either direct current or alternating current power lines to protect sensitive electrical equipment from the transients and continuous noise The module used with a direct current power line includes a continuous suppressor connected between a source and load, and a selenium surge suppressor and a metal oxide varistor connected in parallel across the source The module used with an alternating current power line includes a continuous suppressor connected between the source and the load, and a selenium surge suppressor and a gas tube connected in parallel across the source The module used with the alternating current power line can also include a metal oxide varistor also connected in parallel across the source The alternating current power line filter modules can be connected to single phase, two-phase or three-phase wye and delta power systems The power line filter module provides instantaneous reaction to noise transients and a broad range of energy dissipation or shunting capability along with protection from continuous type noise

Single wire current share paralleling of power supplies

Abstract: Each of a plurality of parallel connected power supplies is controlled by a parallel control circuit which measures the output current from each power supply and compares this output current to the average output current produced by all the power supplies and generates a signal representative of the difference therebetween to drive the output current of the power supply toward the average output curent from all power supplies. The structure includes in addition a switch for disconnecting the parallel control circuit of a failed power supply from the system and a booster resistor for assisting in bootstrapping the startup of a given power supply being inserted into parallel with the preexisting parallel connected power supplies.

Class E tuned power amplifier with nonsinusoidal output voltage

Abstract: An analysis is presented of the amplifier for a limiting case when the load network does not contain a series-resonant output circuit and the output voltage is non-sinusoidal. For optimum operation with any switch-duty ratio, the author has determined the current and voltage waveforms, the collector current and collector-emitter peak values, the output power, the power-output capability, and the load-network component values. The spectrum of the output voltage is given for a switch-duty ratio of 0.25, 0.5, and 0.75. Close-approximation equations are given for transistor power losses and collector efficiency. The experimental and theoretical results are in very good agreement. The measured collector efficiency is 95%. The circuit has practical applications, e.g., in high-efficiency switching-mode DC-to-DC converters used in DC power supplies for microcomputers or communication equipment.

Synchronous power rectifier

Abstract: A synchronous power rectifier incorporating a bipolar power transistor operable in a switching mode to rectify the energy from a secondary winding of a power transformer. The synchronous rectifier reduces or eliminates the need of rectifier diodes, which provides power rectification without the power loss associated with the rectifier diode voltage drops. Moreover, the present invention includes further refinements of the circuit, including adjustment of the rectifier switching time to accommodate delayed turn-off times of bipolar power devices, and adjustment of the switching signal duration to provide output voltage regulation independent of the excitation of the transformer primary. The resulting embodiments of the present invention provide a modular switching power supply circuit of high efficiency, which may be operable together in combination to provide multiple output voltages.

Force-Commutated Reactive-Power Compensator

Abstract: A reactive-power compensator (RPC) is a type of static var compensator (SVC) that is used to dynamically correct power factor to prevent voltage variation (flicker) in ac power sources due to large dynamic loads. It also minimizes total source current. Thus the application of an RPC or SVC to a load may allow addition of substantial new load to existing feeders or substations. A reactive-power compensator suited to industrial ratings (1.0-25 MVA) is described. It utilizes a force-commutated current-source bridge to provide both leading and lagging reactive power. The ability to operate both leading and lagging can reduce by 2:1 the ratings of the RPC itself and the capacitors and magnetics associated with it. The characteristics of the power circuit, the means used to control it, and the resulting dynamic performance is described. Speed of response compares favorably to the thyristor-controlled reactors now in common use as SVC's at higher MVA ratings. This RPC is suited to compensate any balanced three-phase dynamic load.

Apparatus and method for calibrating a motor monitor by reading and storing a desired value of the power factor

Abstract: A monitor for an electric motor, the monitor capable of connection to a supply of electrical energy for the motor, has a microcomputer for measuring the power factor of a voltage applied to the motor and a current flowing to the motor, for storing a desired value of power factor, for comparing a measured value of power factor with the desired value of power factor, and for disconnecting the motor from the supply of electrical energy if the measured value of the power factor differs from the desired value of power factor by an amount that exceeds a predetermined amount. Further, the monitor has means for operating the motor while driving a desired load; means for commanding the microcomputer to measure a power factor of the voltage applied to the motor and the current flowing to the motor while the motor is driving the desired load; and, means for storing the measured value of the power factor, measured while the motor is driving the desired load, as the desired power factor. The monitor may control a motor driving a pump for a fluid system. The monitor may include: a pressure sensitive mechanical switch; means for measuring motor current, voltage applied to the motor, time intervals during which the motor is energized, and the rapidity of cycle time of the motor in order to disconnect the motor from the source of electrical energy to prevent damage to the motor.

The Application of the Current Comparator in Instrumentation for High Voltage Power Measurements at Very Low Power Factors

Abstract: A current-comparator technique is applied to several auxiliary instruments which enables accurate high voltage power measurements to be made at very low power factors using precision wattmeters and precision bridges. The instruments include a high-voltage active-divider with a nominal output voltage of 100 V, a high-voltage inductive-quadrature-current reference source with current output ranges of 1 mA, 2 mA, and 10 mA, and a high-voltage high-capacitive-quadrature-current reference source with current output ranges of 0.1 A, 0.5 A, and 1 A. The current comparator is used in a feedback loop to correct the magnitude and phase of the associated outputs of these instruments to an accuracy of better than ±10 ppm (parts per million) and ±10 ?rad respectively.

DC link current in PWM inverters

Abstract: A general method is described for calculating the current drawn by an inverter from its DC source. It has special relevance to pulse-width modulated inverters and allows the ripple current rating of the filter capacitor to be specified with some precision. The method is for an inverter of any number of phases and uses switching functions derived from the harmonic coefficients of the inverter waveform. Experimental results from single- and 3-phase inverters demonstrate the validity of the method. Some generalised results are presented for a 3-phase inverter for the special case where the output current can be assumed to be the fundamental component only. Variation of the DC link current harmonics with power factor of the load and depth of modulation under these conditions is presented and discussed.

Optimization and scaling of CMOS-bipolar drivers for VLSI interconnects

Abstract: In this paper, rules are presented for the optimized design of CMOS-bipolar drivers for large capacitive loads typical of VLSI interconnects. Simulations and closed-form solutions show that the n-p-n bipolar transistors have to be operated in the high-level injection mode, and that their sizes have to be tailored to the two-thirds power of the load, and it scales with the two-thirds power of the base width of the n-p-n transistor and with the one-third power of the channel length of the MOS transistor. For comparison, the CMOS cascade with a tailored second stage is shown to have competitive potential at the expense of an area being approximately 2.5 times larger than that of a CMOS-bipolar stage.

Electronic control circuit

Abstract: An electronic control circuit for use with a varying power supply (21) such as the output from a solar collector or wind generator and a load (22) such as a battery being charged by the power supply, provides two forms of control for maximizing power transfer. Firstly, an inverter (20) with varying duty cycle is connected between supply and load and the circuit controls the duty cycle thereof to maximize power transfer and secondly a stepper motor (25) is connected to the supply to physically alter the power provided by the supply by, in the case of a solar collector for example, altering the angle of the collector relative to the sun. The cirucit compares successive measurements of the output power and generates control signals to alter the angle of the collector and modify the duty cycle. The circuit is adapted to calculate the mean maximum power position. Limit detection is included to prevent latch-up and a voltage regulator is included to override the system.

Conducted interference voltage of AC-DC converters

Abstract: In this article an analytical method for calculating the conducted interference voltages of the three basic ac-dc converters buck, boost and buck-boost with sinusoidal input current and unity power factor is presented. The analysis includes a simulation of the quasi-peak measurement according to CISPR (Comite International Special des Perturbations Radioelectriques). The influence of the different circuit parameters is investigated and the validity is confirmed by experimental results.

Reactive power compensation apparatus

Abstract: of the Disclosure A reactive power compensation apparatus for compen-sating for voltage fluctuation of an AC power supply system includes a first arithmetic circuit for synthe-sizing a positive-phase fundamental wave voltage signal from voltages of the AC power supply system, a second arithmetic circuit for synthesizing negative-phase voltage signals from the voltages of the AC power supply system, a third arithmetic circuit, coupled to the first and second arithmetic circuits, for synthesizing current instructions from the positive-phase fundamental wave voltage and the negative-phase voltage signals, and a circuit, coupled to the third arithmetic circuit, for generating a reactive power corresponding to the current instructions.

Apparatus for providing cost efficient power measurement

Abstract: Power measuring apparatus including a first multiplexor having its inputs responsive to the polyphase voltage and current inputs being measured. The multiplexor reads these inputs in sequence based on address signals provided by a program controlled microprocessor. The output of the multiplexor is coupled to an RMS to DC converter, the output of which is coupled to a second multiplexor. The voltage inputs are coupled to a voltage averaging device, the output thereof being coupled to additional inputs of the second multiplexor, the output of the second multiplexor being coupled to the microprocessor via an analog to digital converter. The microprocessor reads and compares the voltage output from the averaging circuit and the corresponding voltage at the output of the converter and generates a correction factor and responds thereto. The microprocessor to periodically adjusts the digital value of the voltage from the averaging circuit in response to the correction factor, the adjusted signal being coupled to display means for visual readout. A third multiplexor is provided to detect polyphase voltages and currents. The outputs of the third multiplexor are coupled under the control of the microprocessor to an analog multiplier in a time shared manner via voltage and currents scaling devices such that each phase voltage and corresponding current is simultaneously coupled to the multiplier. The output of the multiplier is coupled to a low pass filter, the output of which corresponds to the kilowatt power consumed for that phase. The microprocessor is capable of calculating a system power factor.

High-efficiency on-board battery charger with transformer isolation, sinusoidal input current and maximum power factor

Abstract: The paper concerns a battery charger that has been developed for use in a battery powered electric road vehicle. The object is to charge the 144 V traction battery directly from the 220 V supply by drawing sinusoidal current at the input, to obtain, a high efficiency and to have transformer isolation from the supply. To achieve this, the rectified 220 V supply is chopped up to 500 V by a DC to DC convertor and transformed to the necessary voltage for battery charging by using a high-frequency self-oscillating inverter with magnetic feedback. The rectified output of the inverter charges the battery. The step-up chopper controls the transmitted power to the battery and ensures a sinusoidal line current. A detailed description of the power circuit is given and the capabilities of the complete system are proved by extensive measurements.

Security apparatus for power converter

Abstract: A security apparatus adapted to a power converter, including a power converting circuit connected between a DC power source and an AC system; a phase detector circuit for detecting the voltage phase of the AC system to provide a phase detection signal; a reference signal generator circuit for generating a voltage reference in accordance with the phase detection signal; a control circuit for controlling an output voltage of the power converting circuit in accordance with the voltage reference. The security apparatus is characterized by a disturbance generator circuit for applying a disturbance to the phase detector circuit; and a detector circuit for detecting an abnormal state in which the phase or frequency of the output voltage of the power converting circuit deviates from a normal one.

Apparatus for medical treatment by hyperthermia

Abstract: The apparatus comprises a power amplifier (12) ; a remote electrode apparatus (32) receiving a high power electrical supply from the power amplifier ; a power transmission ap­paratus (30) arranged to electrically couple the power amplifier to the remote electrode apparatus for supply of electrical power thereto ; and capacitive matching apparatus (14) for providing real time capacitive matching between the power amplifier and the capacitive load across the elec­trode apparatus. Application in treatment of malignant tumors.

Inverter system for inputting alternating current and direct current in combination

Abstract: An inverter system is disclosed for inputting an alternating current and a direct current in combination. This inverter system comprises an AC-DC converter to convert a received AC electric power from an AC electric power source to a DC electric power; a DC-AC converter to convert a thus converted DC electric power and a DC electric power from a DC electric power source to an AC electric power; a first switching means to open or close an electric circuit between an output side of the DC-AC converter and a first load; a second switching means to open or close an electric circuit between the AC electric power source to which a second load is connected and the output side of the DC-AC converter; and a controlling means for controlling opening and closing of the first and second switching means. When a electric power consumption of the first load is larger than an output of the DC electric power source, the controller closes the first switching means and opens the second switching means. When an operation of the first load is stopped, the controller opens the first switching means and closes the second switching means. When the electric power consumption of the first load is smaller than the output of the DC electric power source, the controller closes both the first and second switching means.