Institution
Münster University of Applied Sciences
Education•Münster, Germany•
About: Münster University of Applied Sciences is a education organization based out in Münster, Germany. It is known for research contribution in the topics: Luminescence & Laser. The organization has 694 authors who have published 1067 publications receiving 12597 citations.
Topics: Luminescence, Laser, Photoluminescence, Phosphor, Wind tunnel
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, an evaluation and analysis of the internal tunnel shells deficiencies is presented, where recommendations are made regarding the reduction and avoidance of sources of error as well as the quality increase for internal tunnelshells.
Abstract: Der vorliegende Beitrag befasst sich mit moglichen Fehlern, die wahrend des Herstellungsprozesses von Tunnelinnenschalen entstehen konnen. Dabei werden die einzelnen Herstellungsphasen, Arbeitsablaufe sowie unterschiedliche Rahmenbedingungen in Bezug auf mogliche Schaden und Mangel an der Tunnelinnenschale einer Analyse und Bewertung unterzogen.
Dies beginnt mit den vorbereitenden Masnahmen zur Verlegung der Abdichtung und dem Einbau der Abdichtung, geht uber den Bewehrungseinbau, die Ausbildung des Schalwagens bis zum Betonieren der Schale sowie deren Nachbehandlung und die Beseitigung entstandener Fehlstellen. Es erfolgt anschliesend eine Zuordnung in unterschiedliche Verantwortungsbereiche bzw. Ursachen. Anhand dieser Untersuchungen lassen sich Empfehlungen zur Reduzierung und Vermeidung von Fehlerquellen sowie zur Qualitatssteigerung von Tunnelinnenschalen ableiten.
Source of Errors during the Manufacturing Process of Internal Tunnel Shells
This present contribution is concerned with possible mistakes which can develop during the production process of internal tunnel shells. The individual manufacture phases, operational sequences as well as the different basic conditions regarding possible damage and an evaluation and analysis of the internal tunnel shells deficiencies are submitted.
This begins with the preparatory measures for the laying of the insulation and the mounting of the insulation, the reinforcement mounting, the drilling of the formwork car, and the concreting of the sealing and the installation of the sealing, the armouring installation. An assignment occurs afterwards of different areas of responsibility and causes. On the basis of these investigations, recommendations are made regarding the reduction and avoidance of sources of error as well as the quality increase for internal tunnel shells.
5 citations
••
01 Jan 2005
TL;DR: KrF excimer laser ablation with optimum fluences does not induce oxidation, and the findings were confirmed with DTMS, which demonstrated that excimer lasers ablated with optimumfluences doesNot induce oxidation.
Abstract: KrF excimer laser ablation of two artificially aged triterpenoid films was studied. Ablation rate variations across film thicknesses implied compositional change with depth. Deviations between calculated and measured depths-steps at deeper ablated layers verified previously determined gradients. The findings were confirmed with DTMS, which demonstrated that excimer laser ablation with optimum fluences does not induce oxidation.
5 citations
•
28 May 2010TL;DR: In this article, the authors present a method to contact gaseous mixture and/or gas stream with a mixture containing an amidine, water and aprotic solvent e.g. dialkyl ether, such that a partially insoluble amidine-carbon dioxide adduct or reaction product is provided as outcome.
Abstract: The method involves contacting gaseous mixture and/or gas stream with a mixture containing an amidine, water and aprotic solvent e.g. dialkyl ether, containing an ether and/or ester group such that a partially insoluble amidine-carbon-dioxide adduct or reaction product is provided as outcome. The amidine and the water are provided in a specific ratio before contacting carbon-dioxide, and the reaction product is separated.
5 citations
••
TL;DR: In this paper, the authors present results on green emitting YBO3:Ce, Tb, which can be excited with 370-380 nm radiation at quantum efficiencies of up to 60% and decay times in excess of 2 ms.
5 citations
••
TL;DR: A series of Eu2+ activated luminescent materials according to the composition of Ba2−xEuxZr2−yHfySi3O12 were synthesized using a high temperature solid-state reaction method starting from metal oxides and carbonates as discussed by the authors.
5 citations
Authors
Showing all 729 results
Name | H-index | Papers | Citations |
---|---|---|---|
Jürgen Rehm | 126 | 1132 | 116037 |
Matthias Wessling | 84 | 674 | 26409 |
Rob G.H. Lammertink | 42 | 178 | 6678 |
Thomas Jüstel | 40 | 311 | 8476 |
Dimitrios Stamatialis | 40 | 164 | 5305 |
Fritz Titgemeyer | 35 | 51 | 3891 |
J. M. Ohlert | 33 | 65 | 2706 |
Ralf Möller | 33 | 215 | 5232 |
Helmut Maurer | 32 | 89 | 3108 |
Stefan Klein | 26 | 81 | 1966 |
Evgeny L. Gurevich | 26 | 96 | 1865 |
Ulrich Kynast | 23 | 120 | 1925 |
Aime Cambon | 22 | 216 | 1938 |
Jacques Greiner | 22 | 91 | 1267 |
Yves-Alexandre de Montjoye | 22 | 59 | 4440 |