Journal ArticleDOI
Economics of additive manufacturing for end-usable metal parts
Eleonora Atzeni,Alessandro Salmi +1 more
Reads0
Chats0
TLDR
In this paper, a comparison between two different technologies for metal part fabrication, the traditional high-pressure die-casting and the direct metal laser sintering additive technique, is done with consideration of both the geometric possibilities of AM and the economic point of view.Abstract:
Additive manufacturing (AM) of metal parts combined with part redesign has a positive repercussion on cost saving. In fact, a remarkable cost reduction can be obtained if the component shape is modified to exploit AM potentialities. This paper deals with the evaluation of the production volume for which AM techniques result competitive with respect to conventional processes for the production of end-usable metal parts. For this purpose, a comparison between two different technologies for metal part fabrication, the traditional high-pressure die-casting and the direct metal laser sintering additive technique, is done with consideration of both the geometric possibilities of AM and the economic point of view. A design for additive manufacturing approach is adopted. Costs models of both processes are identified and then applied to an aeronautical component selected as case study. This research evidences that currently additive techniques can be economically convenient and competitive to traditional processes for small to medium batch production of metal parts.read more
Citations
More filters
Dissertation
Solidification Behaviour and Microstructure Evolution of Refractory Metals-Based Alloys under Rapid Solidification
TL;DR: In this paper, the authors examined the microstructure evolution of Ta-AlFe, Nb-Al-Co, Ta-al-Ti and NbSi-Ti alloys using arc melting, suspended droplet alloying and additive manufacturing techniques.
Analysis of Business Models for the Use of Additive Manufacturing for Maintenance and Sustainment
TL;DR: In this article, the authors present a Table of Table of the Table of contents of this paper. But, they do not discuss the relationship between the two categories: this article.
Journal ArticleDOI
Mechanical and Tribological Properties of 3D printed Al-Si alloys and composites: a Review
TL;DR: In this article, the effect of pre and post-processing methods on mechanical and tribological properties of 3D printing Al-Si alloys and their composites before and after pre-and postprocessing methods were reviewed.
Journal ArticleDOI
Integrated traditional and additive manufacturing production profitability model
TL;DR: In this article, the authors present research, process methodologies, and a practical approach to the profit-based economic decision-modeling for production planning in a manufacturing environment resourced with both traditional manufacturing and additive manufacturing technologies.
Dissertation
Maîtrise structurale de matériaux par fabrication additive en vue d'applications bio-médicales
TL;DR: In this paper, the authors propose a procede of micro fusion laser sur lit de poudre, which is a prometteur permettant de realiser des pieces de geometries complexes.
References
More filters
Book
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
TL;DR: Gibson et al. as discussed by the authors presented a comprehensive overview of additive manufacturing technologies plus descriptions of support technologies like software systems and post-processing approaches, and provided systematic solutions for process selection and design for AM Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing.
BookDOI
Rapid manufacturing : an industrial revolution for the digital age
TL;DR: In this paper, the authors present a discussion of the potential of rapid manufacturing in the automotive industry and present a case study of how to modify a garden fork handle in order to make it more efficient.
Journal ArticleDOI
Rapid Manufacturing of Metal Components by Laser Forming
TL;DR: In this article, the main driving force of rapid prototyping or layer manufacturing techniques changed from fabrication of prototypes to rapid tooling (RT) and rapid manufacturing (RM), and nowadays, the direct fabrication of functional or structural end-use products made by layer manufacturing methods, i.e. RM, is the main trend.
Book ChapterDOI
Design for Additive Manufacturing
TL;DR: In this article, the capabilities of additive manufacturing technologies provide an opportunity to rethink DFM to take advantage of the unique capabilities of these technologies, and several companies are now using AM technologies for production manufacturing.
Journal ArticleDOI
Cost estimation for rapid manufacturing - laser sintering production for low to medium volumes:
TL;DR: In this article, a cost model for laser sintering is proposed, which leads to graph profiles that are typical for layer-by-layer manufacturing processes, and the evolution of cost models and the indirect cost significance in modern costing representation is shown.