Journal ArticleDOI
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
Konda Gokuldoss Prashanth,Sergio Scudino,Hansjörg Klauss,Kumar Babu Surreddi,Lukas Löber,Zhi Wang,A. K. Chaubey,Uta Kühn,Jürgen Eckert +8 more
Reads0
Chats0
TLDR
In this article, the effect of annealing on microstructure and related tensile properties is examined and the results demonstrate that the mechanical behavior of the Al-12Si SLM samples can be tuned within a wide range of strength and ductility through proper annesaling treatment.Abstract:
Al-12Si specimens are produced by selective laser melting (SLM) from gas atomized powders. An extremely fine cellular structure is observed with residual free Si along the cellular boundaries. Room temperature tensile tests reveal a remarkable mechanical behavior: the samples show yield and tensile strengths of about 260. MPa and 380. MPa, respectively, along with fracture strain of ~3%. The effect of annealing on microstructure and related tensile properties is examined and the results demonstrate that the mechanical behavior of the Al-12Si SLM samples can be tuned within a wide range of strength and ductility through proper annealing treatment.read more
Citations
More filters
Journal ArticleDOI
Additive manufacturing of metallic components – Process, structure and properties
Tarasankar Debroy,Huiliang Wei,J.S. Zuback,T. Mukherjee,John W. Elmer,John O. Milewski,Allison M. Beese,Alexander E. Wilson-Heid,Amitava De,Wei Zhang +9 more
TL;DR: A review of the emerging research on additive manufacturing of metallic materials is provided in this article, which provides a comprehensive overview of the physical processes and the underlying science of metallurgical structure and properties of the deposited parts.
Journal ArticleDOI
Additive manufacturing of metals
TL;DR: In this paper, the authors describe the complex relationship between additive manufacturing processes, microstructure and resulting properties for metals, and typical microstructures for additively manufactured steel, aluminium and titanium are presented.
Journal ArticleDOI
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair,Marco Simonelli,Luke Parry,Ian Ashcroft,Christopher Tuck,Richard J.M. Hague +5 more
TL;DR: A comprehensive understanding of the interrelation between the various aspects of the subject, as this is essential to demonstrate credibility for industrial needs, is presented in this paper, which highlights some key topics requiring attention for further progression.
Journal ArticleDOI
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
TL;DR: In this paper, the current research status of microstructure, properties and heat treatment of SLM processing aluminum alloys is systematically reviewed respectively and a future outlook is given at the end of this review paper.
Journal ArticleDOI
SLM lattice structures: Properties, performance, applications and challenges
Tobias Maconachie,Tobias Maconachie,Martin Leary,Martin Leary,Bill Lozanovski,Xuezhe Zhang,Ma Qian,Omar Faruque,Omar Faruque,Milan Brandt +9 more
TL;DR: A comprehensive summary of the experimental data reported on the mechanical response of Selective Laser Melting (SLM) lattice structures can be found in this paper, where the design, fabrication and performance of SLM lattice structure are reviewed and the quality of data reported to inform best-practice for future studies.
References
More filters
Journal ArticleDOI
A profile refinement method for nuclear and magnetic structures
TL;DR: In this paper, a structure refinement method was described which does not use integrated neutron powder intensities, single or overlapping, but employs directly the profile intensities obtained from step-scanning measurements of the powder diagram.
Journal ArticleDOI
WinPLOTR: A Windows Tool for Powder Diffraction Pattern Analysis
TL;DR: WinPLOTR is a graphic program for the analysis of powder diffraction patterns that has been developed for a Windows 9x/2k/NT environment and can be used as a Graphic User Interface for programs defined by the user.
Journal ArticleDOI
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
TL;DR: In this paper, the high thermal gradients occurring during SLM lead to a very fine microstructure with submicron-sized cells, which can be modified to a weak cube texture along the building and scanning directions when a rotation of 90° of the scanning vectors within or between the layers is applied.
Journal ArticleDOI
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
TL;DR: In this paper, the effect of several heat treatments on the microstructure and mechanical properties of Ti6Al4V processed by Selective Laser Melting (SLM) is studied.
Journal ArticleDOI
Consolidation phenomena in laser and powder-bed based layered manufacturing
TL;DR: In this article, the authors describe which types of laser-induced consolidation can be applied to what type of material, and demonstrate that although SLS/SLM can process polymers, metals, ceramics and composites, quite some limitations and problems cause the palette of applicable materials still to be limited.