scispace - formally typeset
Journal ArticleDOI

Numerical analysis of hydrogen transport near a blunting crack tip

TLDR
In this paper, Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS), and the resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method.
Abstract
T he hydrogen transport problem is studied in conjunction with large deformation elastic—plastic behavior of a material. Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS). The resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method. Coupled diffusion and plastic straining is analysed with this numerical procedure in the area around a blunting crack tip. A uniform NILS concentration as dictated by Sievert's law at the pressure and temperature of interest is used as initial condition throughout the body. The crack is initially blunted by plane strain mode I (tensile) loading. The finite element results show that hydrogen residing at NILS is generally very small in comparison with the population that develops in trapping sites near the crack surface. That is, lattice diffusion delivers the hydrogen but it is predominantly the trapping that determines its distribution at temperatures of interest. The predominance of trapped hydrogen over lattice concentration prevails even in the case when hydrogen migrates under steady state conditions. Hence, the hydrostatic stress effect is less important than traps created by plastic straining as far as the creation of high total hydrogen concentration is concerned. The trapping site locations and the temperature determine the amounts and locations of high hydrogen concentrations. Consequently, ahead of a blunting crack tip, the total hydrogen concentration and plastic strain diminish with distance from the crack tip whereas the hydrostatic stress rises. This would seem to have significant consequences for fractures induced by the presence of hydrogen.

read more

Citations
More filters
Journal ArticleDOI

Fracture toughness of a 9% Ni steel pipe girth welded with Ni-based superalloy 625 filler metal operating in a sour environment

TL;DR: The microstructure of the welded joints was characterized by optical and scanning electron microscopy, X-ray diffraction, and microhardness as discussed by the authors, and they met DNV-OS-F101 standards.
Journal ArticleDOI

Numerical study of hydrogen influence on void growth at low triaxialities considering transient effects

TL;DR: In this article, the simulation of a void unit cell in a hydrogen pre-charged material is reconsidered here for the first time to incorporate transient effects, i.e., the kinetic redistribution of hydrogen around a void subjected to a high strain rate and a constant stress triaxiality.
Journal ArticleDOI

Modeling hydrogen diffusion in a tribological scenario: A failure analysis of a thrust bearing

TL;DR: In this paper, a coupled diffusion-mechanical finite element simulation model was developed to study the diffusion of hydrogen in a cylindrical roller thrust bearing (CRTB), which enabled obtaining qualitative information pertaining to stress-assisted diffusion in tribological loading and under the influence of residual stresses.
Journal ArticleDOI

Evaluation of the concentration of hydrogen in the process zone near the crack tip

TL;DR: In this paper, an analytic solution of the problem of diffusion of hydrogen in the process zone near the crack tip operating in contact with the ambient hydrogen-containing medium with regard for the preliminary hydrogenation of the material and the gradient of the field of mechanical stresses in this zone is presented.
Journal ArticleDOI

Sensitivity to hydrogen embrittlement of AISI 4140 steel: A numerical study on fracture toughness

TL;DR: In this paper, the authors present the application of a cohesive zone model, which couples diffusion and mechanical fields, to study the hydrogen embrittlement on AISI 4140 steel.
References
More filters
Book

The finite element method

TL;DR: In this article, the methodes are numeriques and the fonction de forme reference record created on 2005-11-18, modified on 2016-08-08.
Journal ArticleDOI

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

TL;DR: In this paper, an integral is exhibited which has the same value for all paths surrounding a class of notches in two-dimensional deformation fields of linear or non-linear elastic materials.
Journal ArticleDOI

Effects of hydrogen on the properties of iron and steel

TL;DR: In this paper, the effects of hydrogen on the physical and mechanical properties of iron and steel are reviewed and a new mechanism for the cold work peak for hydrogen in iron is considered.
Journal ArticleDOI

The diffusion and trapping of hydrogen in steel

TL;DR: In this paper, the mobility of dissolved hydrogen in an iron lattice having a population of extraordinary, or trapping, sites for hydrogen is analyzed under the assumption of local equilibrium between the mobile and the trapped populations.
Book

Hydrogen in metals

Related Papers (5)